eizDkPVJq6i5CsbWhpZNCCxTXHThSQEB1i

i5qZZu7MuP7B8vvcisWsmHBsMkhBiAwU3i

thanks !

Reserve x5 if this device exist

...because We have recent news from the "preorder's market",  I can make new price for this "in-hand" Bitfury Full kit : 105 BTC.

and if you take my KNC Jupiter preorder (30'th of jun 2013)  I can give special price for both ~900GHs :
160 BTC (for Bitfury ~380 and KNC 500+ ).

If you make hardware tuning in bitfurry (pencil modded all card to 1,1OHM with use of heatsinks and fans) possible... you will have 1000 GHS only for 160BTC

How does it sound ? : )

1 KNC Jupiter => 700W+ and still is in preorder but I wish you luck about delivery time hope you get it soon : )

...compared, compared .... always you can buy singles boards or still you can believe in "virtual pre-order".
This is real device "in hand"

ASIC Bitcoin miner on BITFURY 400Ghs (EU August) IN HAND!

THIS IS NOT A PREORDER
Device was delivered in mid-September 2013. Already in EUROPE ZONE (Poland).
Miner is available in stock now, including VAT, customs and no waiting time.

• 16 board modules /~22GHs -> 310-350 GHs  (automatic settings)
• Possible hardware tuning to -> 500GHs+  28-38GHS / per module board  (read forum: https://bitcointalk.org/index.php?topic=287590.0 )  
• ONLY 320 W - very low power consumption. Best efficiency in consumption of electricity available currently on the market  1GHS  = 0,83W!
• This device doesn’t have any hardware overclock (only some software tweaking).
• In use about 20 days!
• 24h Express shipping or direct pickup in Poland (EU) near Szczecion or Berlin (DE)  - available as you wish.

THIS IS REAL, WORKING AND POWERFULL ASIC BITCOIN MINER “IN HAND”




  

---

PRODUCT SPECIFICATION (and description) :

Features:

• Modular design makes maintenance and upgrading easy  
• Easy to install into racks
• Compatible  with ATX PSU  
• Performance: 400GHash/s
• Total power draw max. 400W (efficiency at wall depends on your PSU)  

What’s included:

• 1 Master board  
• 16 hashing boards with 16 Bitfury 55nm ASIC chips for total of 256 chips
• Raspberry Pi Model B with SD card and software preinstalled  
• 2 x Ring terminal to Molex-Jr adapter cable  
• Instructions for assembly and setup  

HOW DOES IT WORK:
Device management master board by RASPBERRI PI is working on Linux. To obtain IP address automatically DHCP is required (e.g. router).
You can connect to RASPBERRY PI through LAN from Windows by Putty program or similar.
Recommended: provide air cooling for device.  

---

GOOD TO KNOW BEFORE:

• The device will be as efficient as it’s operator’s knowledge.  
• Use know-how from forum to get more up to date information.  
• GUIDE to start and tune Bitfury ASIC Miner :
  https://bitcointalk.org/index.php?topic=287590.0  
• This device doesn’t have a case, but it will be packed safely for transport.  
• This is a private auction, please understand I don’t take any responsibility for your level of knowledge or any hardware modifications You make.  

---

DELIVERY, WARRANTY

• Please note that there are several shipping options and costs. It can be delivered safely by courier (DHL, UPS, TNT etc).  
• If you prefer direct pick up you should consider coming to Poland.  
• This device comes from European distributor, it’s already in Poland- so the price includes VAT (EU ZONE).
• The device is in use for ~ 20 days, fully tested and it’s working.  
• The device has 6 months warranty from producer.  

---

PRICE AND INFO :

I paid for this device much more in july 2013 (in the Eurozone even 17.500EUR cost), but unfortunately it happened that this fall I travel a lot and I've also changed the place of residence. The miner hosts temporarily my friend in Poland, but neither he nor I - don't have time, to properly take care of the hardware.
Therefore, you can buy it much cheaper.

• ONLY 130 BTC 80 BTC
• equivalent in EUR 7.600 (if cash + 100EU)
• equivalent in USD 10.500 (if cash + 200USD)

Full payment preferred in BTC. Then instantly I switch miner to your wallet until You pick device !
Current efficiency is 1,8-2BTC / 24h  (2013.10.16)

In addition, I can put an auction on allegro, bitmit.net, ebay etc.. (+ auction fees)
If you prefer direct pick up required 10% reservation deposit.
The buyer doesn’t pay in 24h, I release the item ( if you need more time to collect money you must make reservation payment in BTC)

Excavator can be sent safely and with insurance and express delivery or may be picked up in person.
Remember that after agreeing on the terms and details of the transaction - the miner will receive from someone trusted (I don't want to come especially to Poland but everything can be organized.)

---

CONTACT

• Special email (on photos) or skype.  
• I’m happy to assist You in English or Polish, Spanish (my wife )  
• My attitude to the business is responsible and I expect the same from buyers. I have verified nick on many online services and I’ve sold few miners at polish auctions, 2 months ago (www.allegro.pl like eBay)

Bid, and earn your own Bitcoin !

I reserve the right to remove the auction before because I've also given  ads in other places.

---

SPECIAL OFFER- 900GHS!

I also have JUPITER 550+ in KNC preorder #298x - was ordered on 30th June 2013  (full paid, ready to pick up directly in Stockholm on 18th October )
If you buy both my miners (BF400 and JUPITER 550) - you will have about ~900GHs+ in this October!

More info PW or @
[/list]

Order# 298x
Date of Order: 30 June 2013
1x Jupiter
USA (local pickup)
None

If you want to exchange EUR to BTC would recommend https://eur.bitcurex.com/

I checked it works and is very fast.
SEPA transfer took just one hour!

Very easy and simple system

BITCUREX EUR is very fast and have low fees.

I was surprised SEPA working less then one hour !!
I checked the work and recommend


https://eur.bitcurex.com/

Confirm
working fast and easy and low fees.

I was surprised SEPA working in one hour !!

+1

raTbHDSzAgUBkok9KKnsfb8orUFp3eJg12

Reply button is quite hidden :-)

I've been considering this topic too, and I have to say that it's worth trying. October/November You should have at least 300-500 ghz. I've already started mining, it's a new adventure to me and there's a lot to learn too: what's the best configuration, which mine to use etc. I agree that it's better to invest in BTC than  keeping  money in the funds or socks. As history has showed us - 1 BTC can be worth much more than we can predict. FINANCIAL MARKETS may falter again, banks may go bunkrupt. one must be able to adapt to the changing reality, and this is new way. This sounds futuristic but who knows, maybe it will be sth natural for next generations and I don't wanna be behind the times ;-)

I've also made some calculation about Cost-effectiveness using calculators like this one: http://www.bitcoinx.com/profit/
I measure watt consumption and efficiency and I can say - it's worth it but... it's not for everybody.

If know where to buy avalon chips (ready to deliver) pls share this info with me. Thanks.