You guys rock! One of the best MN/POS coins out there! Amazing returns with just 1 MN and 1 POS wallet! Keep up the good work, and let's take this baby to Mars and beyond!

Hi, there you go:  https://www.posq.io/specifications.html

Well organised Airdrop! Best of luck for your coin!

This is one of the best new coins I have seen! It had a very good start with very fair conditions for all to participate. The tech and the team look very promising.
I really appreciate the work the devs are putting into this coin, and applaud them for their fairness and hard work!

I wish every success to the whole Poseidon team, to the community as a whole and to the coin itself which I am sure will be one of the best out there! 

I suggested the same early on when he started with D3, with detailed info about how to do it using the MAC address of the miner, but Blissz never replied! I guess he wants to keep it this way!

Upvoted! Thanks for all your work dev! Let's make this coin shine!

Here is a link to the new wallet for the new HIGHT coins(only Windows!):
https://mega.nz/#!3NsUiQZC!3NA8GGqQVacrLFo7OfROJoHNfj0A4_AZvTmSmvY_0E4

ATTENTION!
DO NOT use this wallet if you have old version of the wallet with the old (HIGH) coins!
You have first to swap the coins by contacting the dev on Discord (@Healkiller)
Here is the link to the Discord channel: https://discord.gg/AaBwGz8

ATTENTION ALL FORCE WALLET USERS!!

Please STOP using wallet versions 3.4, 3.5 and 3.6 !! They are outdated and cannot stake!
YOU MUST install and use wallet version 3.7!
Download it here: https://github.com/forceunited/force/releases/download/v3.7.0.0/force-3.7.0.0-windows.zip

Hi, there is no glitch, everything is working correctly. There is an increase in network difficulty, and the staking rewards are not coming as often. Also, it depends on the number of coins you have in your wallet, which shows your weight against the weight of the network. You will get a reward eventually, just be patient.

Important! You must be using the latest wallet version 3.6.0!

Nicehash is down (maintenance). They don't know when it will be back!

Here: prohashing.com (registration is closed at the moment!)
or here: blockmunch.club

Every D3 is different, so there are no general settings that fit everybody. Even in a single D3, the boards can be very different, and this is the reason Blissz added the individual board tuning feature.

You should just follow these instructions (courtesy of Blissz):
Start with frequency of 400 and a "Low" voltage setting.
Then increase the frequency until you start seeing HW errors.
Now either reduce the frequency if you want to keep the lowest power consumption, or increase the voltage incrementally until the HW errors disappear altogether, or are not more than 12 per hour.
You should also keep an eye on chip temperatures of each board (or chain), and try to keep them under 80 deg. C. using the fan automatic profiles or fixing the fan speed at a certain percentage. I prefer personally to keep it on automatic.

As a rule of thumb (at least in my 19 GHs D3 batch from mid October), the highest frequency I can use without HW errors on "Low" voltage is 438, some boards cannot tolerate higher frequencies, and they start producing too many errors already at a frequency of 425 or even 419!
 

First of all, reduce the stock frequency from 537 to say 400  before you burn the 3rd chain!, then check whether the 3rd chain shows cooler temperatures, if yes, install Blissz's firmware to tune the frequency for each chain to balance their temperatures, especially the 3rd chain should be reduced way under the other two. I would advise you to choose the highest fan speed to cool the 3rd chain down, you can also use Blissz's "Performance" mode for the fan.
Don't forget though that this might invalidate your warranty! But it's better having a functioning miner than dealing with hassles of sending it back to Bitmain.
Good luck!

Cryptopia will be great for FORCE, the price will definitely increase if FOR is listed there. Also Binnance should be contacted. They are good for smaller coins and tokens.

It will just update your current wallet and keep all your coins. No need to move anything!

I have an idea for Blissz!

First a big thank you Blissz for all that you have done to help us with our D3s. Unfortunately, I have now reverted to the original Bitmain firmware. The problem is that the devfee constant restarts is disrupting my mining on my main pool, which keeps my miners waiting for long time before reconnecting, but, I will be more than happy to use your firmware if you will accept a donation, either using crypto or fiat, or both, and remove the devfee mining.

Here is my idea for how to ensure the donation money and prevent non-paying users from using the firmware without devfee:

You can implement a checking mechanism in the firmware that uses a hashed data that is made up of a username and/or a donation wallet address combined with the MAC address of a miner, and embed this encrypted data inside the firmware for each user and D3 miner individually. The firmware will check this on each start to identify and allow the miner to start without a devfee, otherwise, the firmware will start with the devfee if the information doesn't correspond to this exact D3 machine and user. The MAC address btw is always available under "Network", so upon payment, the user can easily send you the MAC addresses of his machines for you to combine them into one data-set per user, so that you only need to give the user 1 firmware copy for all his machines.

I know that this need some more work on your side, but think about it:
If each user pays you something between 10-15 dollars per D3 miner firmware (a range I think most people will accept), and thinking about the few hundred thousands of D3s sold (according to my information), you will be making a lot of money!

Here is the simple calculation:
If only 100.000 users pay you say $10, you will be making 1 million dollars (or its equivalent in crypto)! This will be way better, faster and easier income for you than using 1.50% of our hashing power that might only bring you 1-2 cents a day with the current difficulty (which will only get worse)!

You can keep the free version as it is now (including the devfee mining), but for those willing to pay, you create a digitally signed versions as described above.

What do you think about this Blissz? My idea is free of charge by the way, so you can just use it!  

I have my D3 miners in the cellar, and 2 weeks ago, it became very cold in my mining room, the temperature was somewhere between 2-3 deg C.  I was shocked to find out that none of my D3 miners could start! they were just dead! I thought right away that it might be the cold, so I took one of the D3s to another warm room (24C.), and after 10 minutes, it started without a problem!  As I didn't want to dismantle the other miners, I just took the one that worked and pointed its hot exhaust air to the intake fans of the other miners using a flexible air ducting hose to warm them up (1 min. was enough for each miner to heat it up). After that, they all started without a problem!

Wonderful! Thanks for the great news frances21co! "FOR" will soon be a FORCE to be reckoned with! 
This is great coin that deserves more publicity and attention! May the FORCE be with you!

Sorry to hear that man! But try first to refresh the browser cache with Ctrl-F5 to be sure that what you see on the screen is the L3+ web interface, not the D3-Blissz one (with the black background and Blissz red logo on top of the Antminer logo). The L3+ interface should look like the one in this image:

There is no file under the provided link!