 Show Posts
|
|
Pages: [1]
|
I have the front adhesive roll on order, I should have what you are looking for by this wednesday march 17th I like these, does the image bleed when its wet or is it water proof? Would be nice if the print was on the inside so it could be stuck to glass
|
|
|
|
Typically you would do a inside glass as a poster and tape it up. As for the Stickers, they can be sprayed with a UV protective coating. Krylon UV Clear Coat typically and they will last for several years outside. My printer is a Pigment based Aqueous Ink. It is water resistant, but not water proof. I like these, does the image bleed when its wet or is it water proof? Would be nice if the print was on the inside so it could be stuck to glass
|
|
|
|
My new favorite material to print on is a Removable/Reusable Adhesive Fabric. So I made up so Bitcoin Acceted Here stickers and put them up for sale. Will be glad to add any other Bitcoin related print. I can print upto 44" wide material. Offering posters up to 36" x 96" for this design. Graphic was recreated with vector and everything is printed at 300dpi. These posters and Stickers are for Indoor, but a UV protective coating can be added on request for outdoor. The stickers are wall and paint safe. I have many customers that use this material on their car doors. https://www.tmtdigital.com/product/bitcoin-accepted-here/ |
|
|
|
|
I got one cranking out from batch 1, running great.. the box from batch 2, reboots every 30-40 minutes. Goes down ever 10-15 minutes with crc errors, fans go off, and restarts after a minute. Temp on heat sinks is from 85F to 105F running at stock speed
HFA 1: 74C/.79V 76C/.79V 67C/.80V 67C/.79V 413.0G/414.5Gh/s
OMG!
|
|
|
|
This should also fix the windows reliability issues for those poor souls mining with their BlowJobs on windows.
Hey now. I never thought I'd be the Windows Defender(tm), but in the interest of fairness, the hashrate graph from Eligius for my Blowjobs is hard solid as a rock. Really. Cranking along at about 430gh each with no problems to speak of for what, almost 10 days now? I can't complain a single bit about that aspect of the BlowJob experience. I'm pleased to hear that. There are two camps with the windows people: everything's hunky dory and everything's funky shit - and that group is more common with 3.12.0. I'm hoping to get more of the former with the latest release. Now if we can get Phil to open up his cgminer mods so it can be merged back in to the root build, and the non-rpi miners can get the benefits. |
|
|
|
This is a very known problem with the RPI that reboots too often it damages the SD cards. The last batch of 30 RPi's I've gotten in the last 6 months at least 10 have this problem. The fix to keep it going is to add boot_delay=1 to the config.txt, til it blows completely. This is common, or I just have bad RPi Karma. either way adding boot_delay=1 to your push will solve lots of problems people are having with them, and will not hurt people without it. Downloaded from setup.hashfast.com image. Very different from what I had been given with the delivery 2 days ago it was a stock minepeon install. Getting the updates now. But you guys are updating the /boot/config.txt which is removing the boot_delay=1 that allows this raspberry pi to boot without hanging at the Rainbow screen everytime a patch comes in. Also if I needed to allow it to boot without HDMI to come back later to check on it, I can't turn that on, so either stop that update or update the config lines only you are trying to push please  It should not hang at the rainbow screen. We now test every RPI that gets sent out, although there were some initially that didn't get tested. If you restore the SD to the HashFast image, initially it's not set up for forced HDMI, but we update that in the first few updates. Once you are at the current version, it should NOT hang on reboot, and HDMI should be on regardless of whether you started with a monitor connected. If this isn't happening for you, I suggest you try burning to a new fresh SD card. I've definitely seen the Pi hate on some SD cards! Sorry for overwriting your configs, we are trying to make it easiest and most reliable for users that aren't very familiar with Linux, so it "just works" as well as possible. It really sounds like somethings wrong on your system, as the current loads never hang. -Phil |
|
|
|
Downloaded from setup.hashfast.com image. Very different from what I had been given with the delivery 2 days ago it was a stock minepeon install. Getting the updates now. But you guys are updating the /boot/config.txt which is removing the boot_delay=1 that allows this raspberry pi to boot without hanging at the Rainbow screen everytime a patch comes in. Also if I needed to allow it to boot without HDMI to come back later to check on it, I can't turn that on, so either stop that update or update the config lines only you are trying to push please Pushed Where? I'm still rebooting every 2 minutes Ok guys, I just pushed you Ckolivas' latest update; 3.12.0hf3 (with the RPI reliability patch). Everyone should have it within the next hour.
We still have the strange hashrate reporting, but hopefully this will speed your rigs back up to were they were with 3.9.0, so let me know what you're seeing.
I also left 3.11 and put back 3.9 there too, and made a symlink so it's easy to switch versions back if you want to play with it.
No other changes.
-Phil
|
|
|
|
Pushed Where? I'm still rebooting every 2 minutes Ok guys, I just pushed you Ckolivas' latest update; 3.12.0hf3 (with the RPI reliability patch). Everyone should have it within the next hour.
We still have the strange hashrate reporting, but hopefully this will speed your rigs back up to were they were with 3.9.0, so let me know what you're seeing.
I also left 3.11 and put back 3.9 there too, and made a symlink so it's easy to switch versions back if you want to play with it.
No other changes.
-Phil
|
|
|
|
|
