 Show Posts
|
|
Pages: [1]
|
|
Hello everyone
I have two rigs with rx580 8gb nitro + both rigs use PhoenixMiner, have the same windows 10 and the same driver(rigs have been working without problems for a couple of years).
Last night i lost my power and one rig works normally while the other as soon as i start miner throws out a message (no available gpus for mining. please check your drivers and/or hardware) and came out of the miner.
Does anyone know the solution?
|
|
|
|
Hello
(1) I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
(2) My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
(1) No. There is the fundamental principal of supply and demand at work here, the GPU demands, say, 100Watts and the PSU has to supply 100 Watts. It does not matter how many wires are connected, but the extra connections will be needed if the GPU demands more power. (2) It is not only the GPU taking power, the CPU, Motherboard, RAM, SSD all need to be powered, this may account for about 100 Watts or so. Also, if you are using powered risers these can take about 75 Watts each, so it all adds up. Getting a 6 GPU rig to mine Ether at 850 Watts would be amazing, I was lucky to get my 6 rig RX580/RX480 rig to take less than 1000 Watts. EDIT: If you want to reduce your power consumption mine a Cryptonote coin, such as Monero or Sumokoin, you will get between 25% to 30% less power consumption. I'm taking 29.8 mh/s at rx 570 sapphire nitro+ on Dual mining with 130W per card... 130w from wall? What is the voltage on gpu? GPU Clock? and Memory Clock? 130W from the wall. I'm mining with 3 gpu cards. Numbers on voltage meter says : 491,3W. System idle = 85W. So that gets me to 135W per card on dual minig. That's good  Can you tell me what voltage is on gpu? Here u go. https://www.youtube.com/watch?v=Nnjh-zp6pP4https://prnt.sc/herv30 ahahahah  tnx bro |
|
|
|
Hello
(1) I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
(2) My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
(1) No. There is the fundamental principal of supply and demand at work here, the GPU demands, say, 100Watts and the PSU has to supply 100 Watts. It does not matter how many wires are connected, but the extra connections will be needed if the GPU demands more power. (2) It is not only the GPU taking power, the CPU, Motherboard, RAM, SSD all need to be powered, this may account for about 100 Watts or so. Also, if you are using powered risers these can take about 75 Watts each, so it all adds up. Getting a 6 GPU rig to mine Ether at 850 Watts would be amazing, I was lucky to get my 6 rig RX580/RX480 rig to take less than 1000 Watts. EDIT: If you want to reduce your power consumption mine a Cryptonote coin, such as Monero or Sumokoin, you will get between 25% to 30% less power consumption. I'm taking 29.8 mh/s at rx 570 sapphire nitro+ on Dual mining with 130W per card... 130w from wall? What is the voltage on gpu? GPU Clock? and Memory Clock? 130W from the wall. I'm mining with 3 gpu cards. Numbers on voltage meter says : 491,3W. System idle = 85W. So that gets me to 135W per card on dual minig. That's good Can you tell me what voltage is on gpu? |
|
|
|
130w from wall? What is the voltage on gpu? GPU Clock? and Memory Clock?
That's not likely, he's probably talking about some software monitoring readings. 130W from the wall mining dual with eth at close to 30 MH/s sounds too good to be true. yes yes |
|
|
|
Hello
(1) I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
(2) My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
(1) No. There is the fundamental principal of supply and demand at work here, the GPU demands, say, 100Watts and the PSU has to supply 100 Watts. It does not matter how many wires are connected, but the extra connections will be needed if the GPU demands more power. (2) It is not only the GPU taking power, the CPU, Motherboard, RAM, SSD all need to be powered, this may account for about 100 Watts or so. Also, if you are using powered risers these can take about 75 Watts each, so it all adds up. Getting a 6 GPU rig to mine Ether at 850 Watts would be amazing, I was lucky to get my 6 rig RX580/RX480 rig to take less than 1000 Watts. EDIT: If you want to reduce your power consumption mine a Cryptonote coin, such as Monero or Sumokoin, you will get between 25% to 30% less power consumption. I'm taking 29.8 mh/s at rx 570 sapphire nitro+ on Dual mining with 130W per card... 130w from wall? What is the voltage on gpu? GPU Clock? and Memory Clock? |
|
|
|
|
Hello
I have a sapphire rx 580 nitro+ 8gb,I attached it 8 pin and 6 pin power supply.
Will the consumption decrease if I turn it off 6 pin power cable?
My rig 6x sapphire rx 580 nitro+ 8gb solo eth mining 181+mh, spends from wall 930w power consumption.
GPU Clock: 1125 Memory Clock: 2150, i undervolt in bios cvddc 950 -mvddc 950 and msi ab core voltage -25, and voltage on 6 gpu is 0.9063
Everything works stable, but I read that almost all 6 gpu consumes about 850w.
|
|
|
|
|
Hello.
How to set speed fan in claymore miner?
I tried the command -tt -50 , for 50% fan speed but nothing happens.
I have sapphire rx580 nitro+ 8gb
I put in a msi afterburner speed fun at 40% and it works, but when I add the command in the claymore it will not increase to 50%.
where I'm wrong?
|
|
|
|
|
