 Show Posts
|
|
Pages: [1] 2 »
|
I have for sale 9 Bitmain Antminer L3+ 504MH/s, and 10 Antminer APW3++ PSU 1600W. Antminer L3+ $500 Each (without PSU) With Antminer APW3++ PSU $550 I also have several Baikal X10 BK-X and Baikal Giant-B , and A3 for sale. Please note that APW3++ PSU does not come with a Power Cord due to too many connector variations. You will need C13 on the APW3++ side and NEMA 5-15P (for 120v socket), NEMA 6-15P (for 240v socket), or C14 (for PDUs) . Sample cords: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1311.R2.TR7.TRC0.A0.H0.X6-15p+.TRS0&_nkw=6-15p+to+c13&_sacat=0https://www.amazon.com/gp/product/B0055F66ZS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1These L3+ are from Dec 2017 batch but I have not been using them since Dec/Jan because my electric panel was maxed out after I hooked up Baikal X10/Giant B. Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy them. For payments, will use Escrow.com https://www.escrow.com or Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0. Buyer pays Shipping and Escrow fee. I have one Bitmain Antminer L3+ running so you can see the revenues for past few weeks: http://blockmunch.club/?address=14wvoV7EMpPzyTNP9bkeFj4WiPGHqnygdWYou can see the payments in BTC at: http://blockmunch.club/site/tx?address=14wvoV7EMpPzyTNP9bkeFj4WiPGHqnygdWThey are all dust free and tested to be in perfect working condition. Unlike Baikal, Bitmain Antminers can be easily overclcked from Admin page to vastly increase revenues. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Please note that I paid lot more than amount listed on invoice because Bitmain asked BCC payment, but Bitmain's BCC/USD conversion rate was much lower than the prevailing BCC market price. I had to pay additional shipping/Import duty. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Invoice Photo:  Rig Photo:  Mining Pool Photo:  Coins that can be mined with L3+:  |
|
|
|
I have for sale 8 Baikal Giant-B miners for $1300 each - without PSU. $1350 with APW3++ 1600w PSU or Dell 750w Platinum PSU with 16 pin Breakout Board. I also have several Baikal X10 and Antminer L3++ , A3 for sale. Baikal Giant-B can mine Blake256R14/Blake256R8/Blake2B/Lbry/Pascal. Compared to Antminer, Baikal Giant-B consumes little power and generates negligible heat. Power supply:ATX Power（12V 6Pin connector * 6） Interface:1 X Ethernet Temp Operation：0 ~ 40 ℃ Dimension：312mm(L) x 125mm(W) x 130(H) Weight：3800g Hash Rate:  Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy. For payments, will use Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0 or Escrow.com https://www.escrow.com . Buyer pays Shipping cost and Escrow fee (as low as 1%). They are all dust free and tested to be in perfect working condition. Please note that the Baikal Giant-B does not come with a back cover as you can see in the photo below. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Mining Pool Monitor Photo:  Rig Photo: Giant-B Backside Photo:  |
|
|
|
I have for sale 9 Baikal X10 BK-X miners for $1700 each - without PSU. $1750 with 750w Platinum PSU or APW3++ PSU. I also have Antminer L3++ , A3 , and Baikal Giant-B for sale. Baikal X10 can mine X11/Quark/Qubit/Myriad-Groestl/Skein (2 new algorithm may be added soon). Compared to Antminer, Baikal Giant-B consumes little power and generates negligible heat. Hash Rate: 10GH/s(±5%) Power supply: ATX Power（12V 6Pin connector * 6） Interface: 1 X Ethernet Temp Operation：0 ~ 40 ℃ Dimension：312mm(L) x 125mm(W) x 130(H) Weight: 3800g Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy. For payments, will use Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0 or Escrow.com https://www.escrow.com . Buyer pays Shipping cost and Escrow fee (as low as 1%). They are all dust free and tested to be in perfect working condition. Please note that the Baikal X10 does not come with a back cover as you can see in the photo below. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Mining Pool Monitor Photo: Rig Photo: X10 Backside Photo: |
|
|
|
10 Breakout Boards available for sale. Features: Voltmeter LED Display Electronics power on/off switch. Solid state capacitor filter, suitable for a variety of power supply Support dual PSU starting at the same time with the small 4 pin connector. Support up to 12 PCI-e cable, Built-in (12) PCI-E connectors on board for quick easy connection. This Breakout Board is Compatible with the following HP Power Supplies up to 1200Watts: HP 1200 watt DPS-1200FB 438202-002 440785-001 441830-001 HSTNS-PD11 HSTNS-PD19 570451-101 570451-001 579229-001. 750 watt DPS-750UB HSTNS-PD22B 591556-101 591554-001 599383-001. 1500 watt HSTNS-PL33 684529-001 684530-201 704604-001 684532-B21  |
|
|
|
I have for sale 10 Baikal Giant-B miners for $2900 each - without PSU. $3050 with 750w Platinum PSU or APW3++ PSU. Baikal Giant-B can mine Blake256R14/Blake256R8/Blake2B/Lbry/Pascal. Compared to Antminer, Baikal Giant-B consumes little power and generates negligible heat. Power supply:ATX Power（12V 6Pin connector * 6） Interface:1 X Ethernet Temp Operation：0 ~ 40 ℃ Dimension：312mm(L) x 125mm(W) x 130(H) Weight：3800g Hash Rate: Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy. For payments, will use Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0 or Escrow.com https://www.escrow.com . Buyer pays Shipping cost and Escrow fee (as low as 1%). They are all dust free and tested to be in perfect working condition. Please note that the Baikal Giant-B does not come with a back cover as you can see in the photo below. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Mining Pool Monitor Photo: Rig Photo: Giant-B Backside Photo: |
|
|
|
I have for sale 10 Baikal X10 miners for $2500 each - without PSU. $2650 with 750w Platinum PSU or APW3++ PSU. Baikal X10 can mine X11/Quark/Qubit/Myriad-Groestl/Skein (2 new algorithm may be added soon). Compared to Antminer, Baikal Giant-B consumes little power and generates negligible heat. Hash Rate: 10GH/s(±5%) Power supply: ATX Power（12V 6Pin connector * 6） Interface: 1 X Ethernet Temp Operation：0 ~ 40 ℃ Dimension：312mm(L) x 125mm(W) x 130(H) Weight: 3800g Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy. For payments, will use Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0 or Escrow.com https://www.escrow.com . Buyer pays Shipping cost and Escrow fee (as low as 1%). They are all dust free and tested to be in perfect working condition. Please note that the Baikal X10 does not come with a back cover as you can see in the photo below. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Mining Pool Monitor Photo: Rig Photo: X10 Backside Photo: |
|
|
|
I have for sale 10 Bitmain Antminer L3+ 504MH/s, and 10 Antminer APW3++ PSU 1600W. Antminer L3+ $1500 Each (without PSU) With Antminer APW3++ PSU $1650 Please note that APW3++ PSU does not come with a Power Cord due to too many connector variations. You will need C13 on the APW3++ side and NEMA 5-15P (for 120v socket), NEMA 6-15P (for 240v socket), or C14 (for PDUs) . Sample cords: https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2047675.m570.l1311.R2.TR7.TRC0.A0.H0.X6-15p+.TRS0&_nkw=6-15p+to+c13&_sacat=0https://www.amazon.com/gp/product/B0055F66ZS/ref=oh_aui_search_detailpage?ie=UTF8&psc=1These L3+ are from Dec 2017 batch but I have not been using them since Dec/Jan because my electric panel was maxed out after I hooked up Baikal X10/Giant B. Located in Pleasanton, CA, USA. Local pick up is OK and you can test them before you buy them. For payments, will use Escrow.com https://www.escrow.com or Forum Escrow https://bitcointalk.org/index.php?topic=2439910.0. Buyer pays Shipping and Escrow fee. I have one Bitmain Antminer L3+ running so you can see the revenues for past few weeks: http://blockmunch.club/?address=14wvoV7EMpPzyTNP9bkeFj4WiPGHqnygdWYou can see the payments in BTC at: http://blockmunch.club/site/tx?address=14wvoV7EMpPzyTNP9bkeFj4WiPGHqnygdWThey are all dust free and tested to be in perfect working condition. Unlike Baikal, Bitmain Antminers can be easily overclcked from Admin page to vastly increase revenues. I test each unit before shipment to make sure they are fully working. Due to the nature of Cryptocurrency Mining, I can offer replacement but no refund. Each unit will be shipped with a unique sticker which if peeled/removed will void any replacement. Each unit has a unique MAC/SNOs that will be used to track/identify each shipment. Buyer has 24 hours after delivery to test or troubleshoot with seller before funds are released to seller. Please note that I paid lot more than amount listed on invoice because Bitmain asked BCC payment, but Bitmain's BCC/USD conversion rate was much lower than the prevailing BCC market price. I had to pay additional shipping/Import duty. Kindly PM with any inquires. After initial PM, Skype and Email is possible. Invoice Photo: Rig Photo: Mining Pool Photo: Coins that can be mined with L3+: |
|
|
|
@Crypto2Alt
thx for the hints. I logged into it by ssh and i'am pretty sure now that its indeed connected to the /etc/network file .
When i tried to edit the /etc/network i got the following in SSH
"Error reading lock file /etc/network.interfaces.swp:Not enough data read"
I was afraid of changing anything at this moment as i have only basic ssh skills and did not want to mess anything totally up. You know, at least the baikal works
right now until the next failure.
But, i'am pretty sure now that these failures are indeed related to this /etc/network thingie.
Why?
- New orange pi got the same mistake, but after restarting the baikal, cleaning all cashes and cookies and a reset it went back to work while i allready was sure
that the next orange pi is vaulty now. This is not the case, the orange pi is in full working order.
- Earlier today in the morning, the internet stopped for some seconds and you guess it, exactly this Baikal stopped working again. Pretty sure it is due this
missing or vaulty /ect/network data file. Just by the way, this internet disruption brought my L3's as well out of working order and 1 of them did not restart too.
While the S9's, the other Baikals and the D3's had not problem with the internet disruptin. Just in case it is of interest for someone.
This said, i'am pretty sure now that the problem is indeed like here discussed the /etc/network/ file(s).
My question now is:
- how do i handle this /etc/network/ data read file (explained about what error i get)
- how can i replace this file for example from another working Baikal? SSH? How?
- Can i write the suggested changes and save it to a file like suggested even with the error i got while opening the file? If yes, as what do i have to save it?
- Any other advices and tips?
Forgot to write. The Baikal is working perfectly right now for at least 12 hours again and the web login is working as well, but i'am pretty sure that at the next short internet interuption it will fail again.
I agree with what @puwaha stated - it's better to leave the Baikals on DHCP and reserve the IP address on your router so that the Baikal gets the same IP every bootup. Looks like you tried to edit directory (/etc/network) instead of the file (/etc/network/interfaces), hence the error. If you are not familiar with Linux, better copy and paste commands others have mentioned earlier. If you are trying to restore a corrupted network/interfaces file, you could ssh into your Giant B. But first check what's in the file: baikal@Baikal:~$ cat /etc/network/interfaces If you think it's corrupted, you can edit it using nano/vi and copy/paste content from another Giant B ssh session. |
|
|
|
Ok, here i'am again. I described my problem on the first page of this topic allready. What happened meanwhile with my Giant X10. Bought a new orange pi, mounted it with a new fleash including auto lo iface lo inet loopback auto eth0 iface eth0 inet static and the Baikal worked perfectly for some days now and a sudden back to the old problem. Means. I can not login into the web interface anymore. After one restart the baikal worked at least on my pools. Now after another shutdown the Baikal made i even have no more access to it. Strange thing is that after mounting the new orange pi he got the ip .117 assigned, while he former was on .112. I thought now big deal, important he works, but after the shut down he is back to .112 now and as said allready, i again can not login anymore. What could cause that behaviour? Only this Baikal is making problems, others work all perfectly. The Routher has a static IP, after that there is a 24 port Cisco 2950 switch where the Ants and Baikals are connected. I really have no more idea what to try. Strange thing is that with the new orange pi it worked perfectly for some days and now back to old problem?!?!  Any advice or help what to try?? Login to Baikal Terminal from Web Interface and then try to assign your static address. But first make sure there are no other devices already using .117. For example: Baikal Login: baikal Password: baikal ifconfig sudo ifconfig eth0 192.168.1.117 netmask 255.255.255.0 ifconfig reboot Then reserve .117 for your Baikal via your Router Admin interface. |
|
|
|
hey, will be sending a pm.
interested in 2, local pick up
Ok, I replied to your PM. |
|
|
|
I just sent you a PM but not sure if it went through since I'm new. Please let me know. If not please let me know your price on 3 of L3+ with PSU. Thanks
Thanks, replied back to your PM. |
|
|
|
I would probably be willing of them if we can come to a deal and they are still for sale?
Yes, they are all still available for sale |
|
|
|
|
