Hi,
Im running 2 x gigabyte rx 580 xtr 8gb oc cards, and have noticed the variables passed to claymore dont take effect on the second card. Is this common?
For example, ive tried this line (assuming same values should be applied to all cards?)
-cclock 1200 -mclock 2200 -cvddc 900 -mvddc 900
then tried this
-cclock 1200,1200 -mclock 2200,2200 -cvddc 900,900 -mvddc 900,900 (to assign each card specifically) and same thing happens both times.
My primary card gets the values set, but secondary just uses the default or the afterburner settings
Im mining dual eth + decred, tried claymore 10.1 and 10.2, win10 machine, and radeon driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
Any ideas on what it might be?
Im running 2 x gigabyte rx 580 xtr 8gb oc cards, and have noticed the variables passed to claymore dont take effect on the second card. Is this common?
For example, ive tried this line (assuming same values should be applied to all cards?)
-cclock 1200 -mclock 2200 -cvddc 900 -mvddc 900
then tried this
-cclock 1200,1200 -mclock 2200,2200 -cvddc 900,900 -mvddc 900,900 (to assign each card specifically) and same thing happens both times.
My primary card gets the values set, but secondary just uses the default or the afterburner settings
Im mining dual eth + decred, tried claymore 10.1 and 10.2, win10 machine, and radeon driver - Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23
Any ideas on what it might be?
Try to delete afterburner.
Also I would recommend to ddu drivers and install 17.11.1 (nov 2) drivers and set settings to Compute.
Run claymore and see if its good, then install afterburner.
Thanks mate,
Have just tried radeon adrenaline 17.12.1 with compute setting on. without afterburner installed, claymore's doesnt change any settings now. including mem/core clock speeds? i tried 17.11.1 initially, however i was getting about 6mh lower than with the blockchain drivers.
Thanks
hi guys,
still experiencing the same issue. claymore refuses to set clock, core and voltage settings on my gigabyte aorus 580 xtr cards. i have to use afterburner which isnt reliable. every now and then my cards default to normal clock settings which affects the hashrate and power use.
Any ideas why this might be the case?
running win 10 pro, and claymore 10.2.
Thanks