Show Posts
|
Pages: [1] 2 »
|
Есть проблема к подключению к пулу, при старте приходится ждать несколько минут (всегда по разному) пока майнер законнектится к пулу. Идет ожидание: 2021-03-13 11:34:40.601 ( 162.407s) WARN| Connection lost, reconnecting... 2021-03-13 11:34:45.615 ( 167.421s) INFO| Connecting to frontend: coinsforall.io:6666 ... Раньше (до переезда после пожара) также была проблема но реконнект был сильно быстрее и такой проблемы почти не было на пуле xpmforall.org Потери коннекта рандомные, я логики отвала не заметил, это прям убивает весь смысл майна. Коннект к интернету и другим пулам у меня стабильный, сетевых проблем нигде нет, кроме coinsforall.io, причем заметил что после где то 5 подлючений появляются проблемы, то есть больше 5 станциий с одного IP пул не держит. Приходилось остальные переводить на xpmforall.org хотя он и менее удобный в плане настроек выплат и мониторинга. И сейчас заметил что после нахождения блока через 6 секунд майнер также теряет коннект, и на всех станциях так происходит, выглядит вот так: 2021-03-13 11:19:33.709 (3628.418s) 1| GPU 4 found BLOCK! 2021-03-13 11:19:34.053 (3628.751s) 1| GPU 1 found share: 7-ch type 1 2021-03-13 11:19:34.736 (3629.432s) 1| GPU 5 found share: 7-ch type 1 2021-03-13 11:19:35.189 (3629.884s) 1| GPU 2 found share: 7-ch type 2 2021-03-13 11:19:35.517 (3630.211s) 1| GPU 4 found share: 7-ch type 2 2021-03-13 11:19:36.587 (3631.289s) 1| GPU 2 found share: 7-ch type 3 2021-03-13 11:19:36.978 (3631.677s) 1| GPU 4 found share: 7-ch type 3 2021-03-13 11:19:37.321 (3632.022s) 1| GPU 5 found share: 7-ch type 3 2021-03-13 11:19:37.743 (3632.451s) 1| GPU 0 found share: 7-ch type 3 2021-03-13 11:19:38.118 (3632.823s) 1| GPU 4 found share: 7-ch type 2 2021-03-13 11:19:38.853 (3633.559s) 1| GPU 5 found share: 7-ch type 3 2021-03-13 11:19:39.882 (3634.575s) WARN| Connection lost, reconnecting... 2021-03-13 11:19:44.885 (3639.578s) INFO| Connecting to frontend: coinsforall.io:6666 .. 2021-03-13 11:22:44.180 (3818.874s) INFO| Connecting to bitcoin: 65.21.60.250:60000 ... 2021-03-13 11:22:44.196 (3818.890s) INFO| Connecting to signals: 65.21.60.250:60001 ...
|
|
|
You are right about the stale shares of nanominer. But for some reason gminer is not producing an accepted share for any of my 390's under smos. It may be related to opencl version 18.20 or it needs root access, I don't know. I can't test now under hiveos, where the opencl is 19.20. Any suggestions?
I use amd pro 19.50 and 20.30 drivers in ubuntu and hive. Try them.
|
|
|
Nanominer has nearly 15% of stale shares on pool stats, gminer is better and it still works on 4gb r9 290 at full speed. Hope PhoenixMiner can be fixed to work again on r9 390, i dont ask for 290, not so much time left for then on eth. I like his fan control in linux and ethman statistics so wait for update!
|
|
|
hello. please tell me what is the most productive video card available today? How much does the CPD give out? Thanks
Vega 64 on samsung memory gives 25 CPD Miner 10.5 - ASM ? What is the consumption? 10.5 ASM and around 200 Vatts
|
|
|
hello. please tell me what is the most productive video card available today? How much does the CPD give out? Thanks
Vega 64 on samsung memory gives 25 CPD
|
|
|
I confirm that bbc01.bbcpool.io is not paying. There is no information on their site that the GPU mining is prohibited!
|
|
|
It seems like the end of the Primecoin story is close, Poloniex made maybe the final shot. It was nice almost 7 years of mining and trading ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
Confirm that Nano and Fury get 20% boost and RX480 goes from 0.4 to 0.47 at 1200 core clock. 470 now get 0.41 at 1190 core. Driver - 19.4.3. There is a problem that mixed stations with for example 390 and fury. They cannot work in asm mode together.
|
|
|
"asm" kernel not work on R9 290 and 390, only generic works but slower than the older version of miner. Got this error on win 8.1, 10 and diffent drivers:
2019-07-22 18:38:40.945 ( 0.608s) INFO| compiling Hawaii_sha256.bin ... 2019-07-22 18:38:42.698 ( 2.360s) INFO| compiling Hawaii_sieve.bin ... 2019-07-22 18:38:46.786 ( 6.449s) INFO| compiling Hawaii_sieve_utils.bin ... 2019-07-22 18:38:47.104 ( 6.767s) INFO| assembling Hawaii_Fermat.bin ... 2019-07-22 18:38:47.175 ( 6.838s) INFO| compiling Hawaii_Fermat_utils.bin ... 2019-07-22 18:38:48.101 ( 7.764s) ERR| Existing OpenCL kernel (Hawaii_Fermat.bin) incompatible with configuration 2019-07-22 18:38:48.106 ( 7.769s) ERR| Please remove all *.bin files and restart miner
I tried different parameters in config, but still got error. Fury and Nano works fine. Some 480-s hangs at start up, mostly in first gpu's slot. The big trouble is also log file. Need to have swich it off
|
|
|
Россия Иркутск 3.75 руб квт для юр лиц цена просто шоколад только смысла все меньше во всей этой майнинговой лихорадке. Если налоги и обслуживание прибавить то вообще нет смысла. Мало того ведь асики дохнут пачками и об этом ведь мало кто пишет по честному. С каждым более тонким тех процессом чипы требуют все более низких рабочих температур и тут уже охлаждение становится резко дороже. В общем удивительно смотреть на эту минииндустрию с таким коротким жизненным циклом. Думаю в Европе крупно майнят только используя выделяемое тепло в обогреве и т.п. то есть совмещая и таким образом сильно экономя
|
|
|
Same problem. How much ram do you have in that rig?
|
|
|
Кстати это наш соотечественник запилил прокси для майнинга эфира, все его пулы на DwarfPool.com, реально работает, только точный прирост я не проверял еще.
|
|
|
Need to give normal names to workers and have email notifications about off line workers. Great if it will be done! Also need EU server.
|
|
|
May be all the users of mobileminer should donate enough so nwoolls can support it. I can donate manually every month 1% of my earnings. Or we need to find who will continue it. Server is not s problem. Let's think about it together.
|
|
|
I forgot my new password in bitcoin core, but i remember old password and i have old version of wallet.dat (with old password). If i just replace it will it help me to take control and not loose today balance? I am not sure and afraid of this step. Need advise!
|
|
|
On my samsung galaxy s3 mobileminer don't remove hosts from the list. I delete some hosts but when I click refresh they appear again. So changes don't save. And also I have a problem - no notification even after I bought the program in Google play.
|
|
|
Found a little problem for me, MobileMiner uses OS windows system name to show my rigs. If i change it, MobileMiner begin to show me both systems, old and new, and old one is always offline. How to remove from list?
|
|
|
Приватный GPU это конечно серьезно, могли бы и в продажу выставить, мы купили бы за недорого-))
|
|
|
Если шейдеров 4096 будет и карты будут доступны к концу года то значит сейчас покупать 7000 серию для майнинга уже неинтересно. Не успеет отбиться даже на скриптах.
|
|
|
|