 Show Posts
|
|
Pages: [1] 2 »
|
|
Globalboosty has not Autoexchanged in a while or never?
Is there a minimum amount you need of Globalboosty for Autoexchange to work?
|
|
|
|
I am getting this issue in MPM. Want to try Blockmasters for the LTC payout. Tried NLPool and the payout is really low compared to my other pools, I am stuck using NLPool until i get enough balance for a payout. |
|
|
|
|
Just tried this Miner.
It is the slowest of all the Equihash 1445, 1926, 965.
And the Dev donation fee is 2%.
Is the Dev going to lower the Dev fee?
Findings of this new miner on 2 x 1070 OC'd:
AMD_NVIDIA-lolMiner-GPU#00-GPU#01[1.00%] Equihash965 35.39 KH/s
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash965 41.65 KH/s
AMD_NVIDIA-lolMiner-GPU#00-GPU#01[2.00%] Equihash1445 56.00 H/s (2% fee, higher fee and slower miner)
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash1445 82.00 H/s
AMD_NVIDIA-lolMiner-GPU#00-GPU#01[2.00%] Equihash1927 37.00 H/s
NVIDIA-EWBF2Equihash-GPU#00-GPU#01[1.00%] Equihash1927 39.00 H/s
Well this won't be used as it is the slowest one.
|
|
|
|
Why is Monero auto exchange disabled ?
Monero Wallet on bittrex is online so it should be working just fine.
Thanks in Advance
Best Regards
Maybe the Dev is on vacation? But they have changed the ETH tx fee to 0.004 just fine. I just wish they would say why it hasn't been turned back on? |
|
|
|
beat the dead horse time again it seems.....
bitcoin-gold.. msg showing bittrx wallet under maint. has been gone for a couple of weeks now.
any idea when we should start seeing it auto-exchange again? even now it still pops u time to time on algo-switch for equihash
but it is enough where i am just about to disable equihash, i'm only a 4gpu miner but when i have almost $2 just sitting there.. i know i'll see it eventually
just like everything else here at MPH, i know it takes time sometimes, but even just some msg on the site somewhere sayin hey we know n w are lookin into it would be nice...
At Bittrex Inactive since May 18, one month. I had a few dollars of BTG at MPH, sent it to HitBTC, then to something else to my exchange. Here is my config.txt for MPM for the MPH section so it doesn't mine BTG. {
"Pools": {
"MiningPoolHub": {
"User": "$UserName",
"Worker": "$WorkerName",
"API_ID": "$API_ID",
"API_Key": "$API_Key",
"ExcludeCoin": ["Bitcoin-Gold"]
},
"MiningPoolHubCoins": {
"User": "$UserName",
"Worker": "$WorkerName",
"API_ID": "$API_ID",
"API_Key": "$API_Key",
"ExcludeCoin": ["Bitcoin-Gold"]
}, |
|
|
|
|
Monacoin is enabled again at Bittrex, is MPH going to enable Monacoin for auto exchange?
|
|
|
|
|
Auto Exchange is usually every 4hrs but this evening it is a bit longer.
My Auto Exchange is DASH.
Last time was 2018-04-19 20:10:26 (UTC) and it is 2:29 it now.
|
|
|
|
|
Has the site been HACKED?
|
|
|
|
|
@MiningPoolHub is there an issue on the main Balance page? Per my logs am mining on MiningPoolHub but nothing is changing on the main Balance page like it usually does.
Also Auto convert to my coin Dash is overdue, last transaction was 2018-03-16 10:08:13 (UTC), usually 4hr +/-
|
|
|
|
Has any one notice the btc payout is not listing? I have been mining all day with 3 systems and no btc pay out made today. Would eth be a better coin to mine for pure profit? I see its at 1k today all most.
My last Auto Exchange to BTC was at 0:37 UTC and it is 6:13 UTC now, almost 6hrs. Usually I see it add to my BTC every 3 to 4 hrs. I guess it comes when it comes. |
|
|
|
When it shows mBTC as 0.00000000 does mean that the share was so small that the mBTC will be so small it doesn't show on Zpool site?  |
|
|
|
Use LTC ETH or even BCH for frequent withdraws .. then send to an exchange when you have saved up a bunch. BTC isn't worth it (even at .0005) unless you keep your coins on the site for a looooong time.
I waited to get a large enough BTC Balance and then switch Auto Exchange to LTC and waited for some LTC to show up before I withdrew the BTC. The problem is you find out the change was only on the website and not the actual transfer. I will use LTC or ETH from now on. |
|
|
|
Hey there, on MPH it says that BTC fee's have been lowered to 0.0005 BTC per transaction yet in the BTC wallet it still shows 0.0008 being the fee, is it 0.0005 or 0.0008??  I did a manual payout of BTC and it said fee lowered to 0.0005 but actually the fee was 0.0008. |
|
|
|
|
Well now it will take even longer to reach the previous 0.002 BTC min withdrawal.
BTC from 0.002 to 0.0028
Fee from 0.0003 to 0.0008 yes that will be from $4.65 to $12.40.
I picked the wrong Auto Exchange and have been waiting to reach the BTC min withdrawal and then switch to a lower fee coin. Funny as I get close to having enough, the goal post changes. I will wait till my balance has been reached then switch but wait a bit for the unconfirmed to finish.
Oh well.
I understand the fee increase as BTC is terrible for high fees.
|
|
|
|
|
18182904 2017-12-20 14:54:29 (UTC) Credit_AE Orphaned 1468956 0.00008416
Monero
Does Orphan mean it tries later.
|
|
|
|
how much fee should I expect if I move 0.003 BTC (USD$56.00) to my wallet ?
TYIA
From the BTC wallet page: CASH OUT Please note: a 0.0003 BTC transaction fee will apply when processing "On-Demand" manual payments Minimum Cashout: 0.002 BTC Payout will be processed within few minutes. Don't remove or change coin address after requesting cash out. |
|
|
|
Alright, Thanks. Just wanted to make sure it wouldn't mess anything up if i left in or took it out. Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?
It might take a lot longer to get high enough balance of BTC on zpool etc, so it is up to you. Don't forget if BTC keeps going up, your earnings at zpool go up too. I don't use the other pools because it doesn't switch there often enough. End up with small amounts there for super long times. I am redoing my Benchmarking because I added another 1070 And so far Zpool has the top 2 spots Lyra2RE2 that will payout almost double compared to the the rest. |
|
|
|
Can/should i take my BTC wallet address out of the MPM bat file if i am only using the MPH pool and am going to set my auto exchange Litecoin?
It might take a lot longer to get high enough balance of BTC on zpool etc, so it is up to you. Don't forget if BTC keeps going up, your earnings at zpool go up too. |
|
|
|
FEATURE REQUEST
It wouldn't be difficult to implement but would be a big improvement if you could set your timezone in your account and have all the transactions display in your local time. Does my head in always converting from UTC to my time.
Me too. Or at least on the balance screen to have the time of the last transaction occurred. |
|
|
|
If you are confused then just leave the pool to do its work unless you have a more specific question about the information you are looking at.
Very big stupid anwser.  I try my best. You guys should be a little more appreciative. Aaronsace is not part oh miningpoolhub and os taking the time to answer and help most people with questions. Some of which are just plain lack of due diligence. We understand this pool is not as easy as Nicehash. It was never meant to be that easy. Its a pool for miners that charge less than 1% and not 4%. There are other services that would be more user friendly for people who actually do not understand crypto and just want to have profit. Once your setup is up and running there is really nothing left to do, it just works with MPH and MPM. Nicehash was rip off. Did anyone watch the 1st video the 2 Nicehash guys released? The 2nd guy in the video was investigated for crimes or did time? |
|
|
|
|
