interested in buying
pm with your skype link please (tried to search but found more than one user with the same id)

thanks for this reply
i'm not sure i get what you mean tho, it has 6x8PIN cables which will go for 6 gpus as you said
for the 6pin slots in the PSU (which i plan to use to power the riserz) only cables that are included with the PSU are 6pin to sata or to molex
my question was is there a 6pin cable with 2 male sides. 1 would go to the PSU slot and other directly to the riser

the one you posted has one male side, and 1 female side not sure what to do with it if both the PSU and Riser have female ports

not sure if my information are fully correct so please let me know if i'm misunderstanding something

thank you in advance

----------------------------------

Vann, so you're saying i can use 1 8-pin cable (along with the splitter) to power both the GPU and the riser

would that be safe? would the 150w that 8pin provides be enough for both the gpu and the riser?

Thank you so much for this quick answer

just one more question. since i'm using 3 6pin ports on the PSU to power those 3 riserz, is there any direct 6pin to 6pin cable or something to avoid using 2-3 converts on the way..since both sides are 6pin why convert to 2x sata/molex then back to 6pin


Thank you in advance

Hello everyone
i'm new to mining and trying to build my first mining rig
i have a EVGA SuperNOVA 1000 G2 and i'm going to use 6 RX 570 GPUs for mining
i have a few questions
is 1000w enough to power 6 cards with the motherboard/cpu/risers...etc
or should i just start with 5 gpus


second question is, in case it's ok to power 6 cards
since the PSU has 6x 8PIN ports for GPUs i can use each to power a single card
but then i'm left with powering 6 x risers
i still have 6 x 6 PIN ports on my PSU (says SATA/PERF on them)
is there anyway to power 6 risers using these ports? since SATA connectors are not safe what should i use?

Thank you guys in advance