What about adding XVG (Verge-Lyra2REv2)?

it is mostly on the top of the list at whattomine.com (for my rig with 6x GTX1080Ti),
should be good for many of us too...

yes there was switching, lyra2re2, equihash, neoscrypt.. (see log below)
(I tried all miners standalone and no problem with 102% power)


from the log:
   Status: Running

      Speed Active                      Launched Command
      ----- ------                      -------- -------
395,79 MH/s 00 Days 01 Hours 30 Minutes 3 Times  Bin\Excavator\excavator.exe -p 23456 -c
                                                 MiningPoolHub_Lyra2RE2_2_Nvidia.json -na


   Status: Idle

    Speed Active                      Launched Command
    ----- ------                      -------- -------
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\NVIDIA-Palgin\ccminer.exe -a lyra2v2 -o
                                               stratum+tcp://hub.miningpoolhub.com:17018 -u miner2speed.ku1 -p x
0,00 PH/s 00 Days 00 Hours 13 Minutes Once     Bin\Excavator\excavator.exe -p 3456 -c MiningPoolHub_Equihash_3.json
0,00 PH/s 00 Days 00 Hours 09 Minutes Once     Bin\Excavator\excavator.exe -p 23456 -c
                                               MiningPoolHub_Equihash_2_Nvidia.json -na

I used the MultiPoolMiner but there is some strange thing going on when MPM running or algo-switching:
I had to reduce the max power down to about 80% because otherwise the power supplies of my
6x 1080ti rig did an "overload shut off" from time to time.
This does not happen when running the exact command in a simple .bat file without MPM.

for example:
( excavator.exe -p 23456 -c MiningPoolHub_Lyra2RE2_2_Nvidia.json -na )

Has anyone an idea of how to use excavator with MPH-algo switching directly in the .bat file
(as shown for nvidia/ccminer and EthDcrMiner64)?
The real problem is to enable the "no retry" function for excavator (if available)...
thx for your help