Show Posts
So my Sapphire Nitro+ RX580 Limited Edition cards came in today, so I ran some benchmarks.
I first tried to find the highest error free memory clock for each memory strap and chose one that performs the best.
I followed this up by downclocking the core until the mining performance was noticeably affected if I'd gone further.
I then proceeded to reduce voltages as much as possible.
....
I first tried to find the highest error free memory clock for each memory strap and chose one that performs the best.
I followed this up by downclocking the core until the mining performance was noticeably affected if I'd gone further.
I then proceeded to reduce voltages as much as possible.
....
hello Apneal, How did you test the memory straps? MSI Afterburner?
Wooh there little dawgie ! The original post was from almost a year ago, but anyway..
I used Afterburner to quickly test Memory Clock and Voltage settings to tweak my cards, you would also need HWinfo to check for "GPU memory errors", no errors are best, lots of errors are very bad.
Some people like to use OverdriveNtool instead of Afterburner.
Link to OverdriveNtool.
https://forums.guru3d.com/threads/overdriventool-tool-for-amd-gpus.416116/
Link to HWinfo.
https://www.hwinfo.com/download.php
Thanks! I test it in changing the config of claymore's start file...
I am confused by the mem errors reported by HWinfo, meanwhile there is no reject from the pool.
Using 1xSapphire Rx480 8G nitro+,with uber-mix timing 3.1.
29.7m @ -cclock 1200 -cvddc 950 -mclock 2020 -mvddc 950.
runned 24hours with no reject but 1000 in total mem errors reported by HWinfo.
