 Show Posts
|
|
Pages: [1] 2 3 4 »
|
Got my units a while back and all have been tested and no DoA.  Thanks very much! [Nevermind answered]Will you be getting the U2s in the next batch? |
|
|
|
I just sent a pm request for 10 units.
Payment sent. PM'd address info & tracking email / specification. |
|
|
|
|
I just sent a pm request for 10 units.
|
|
|
|
Then my command would be:
bfgminer -o Pool_URL:Port -u USERNAME -p PASSWORD --icarus-options 115200:1:1 --icarus-timing 3.0=100 --bmsc-options --bmsc-freq 0781
Not quite, those are command line options for the BITMAINtech-specific fork of cgminer. For bfgminer (if you want to run both Block Erupters and U1s and overclock) you would do: bfgminer -o pool:port -u username -p password -S erupter:all -S antminer:all --set-device antminer:clock=x0781 K. Thanks! |
|
|
|
|
Wow!
Then my command would be:
bfgminer -o Pool_URL:Port -u USERNAME -p PASSWORD --icarus-options 115200:1:1 --icarus-timing 3.0=100 --bmsc-options --bmsc-freq 0781
correct?
|
|
|
|
|
Are there compile options for Antminer support? I didn't see any references in the README.txt.
Can bfgminer run ASIC Erupters and Antminers in the same instance?
|
|
|
|
Just searched the README.txt, NEWS.txt and ASIC-README.txt. Found nothing about Antminer support.  What am I missing? Thanks. Thanks. |
|
|
|
Just searched the README.txt, NEWS.txt and ASIC-README.txt. Found nothing about Antminer support. What am I missing? Thanks. |
|
|
|
|
I want to run my new Antminer USB along side my old ASIC Erupters with cgminer on Archlinux.
I'm planning on using separate config files. But I'm wondering if I should create separate folders for each instance?
Thanks.
|
|
|
|
|
What is the price breakdown?
|
|
|
|
Ok. I think I see what I did wrong. I started a rescan because it seemed to be sitting on one block for a while. That's why it was taking so long. Today it just finished scanning the bitcoin db. So I enabled the Litecoin currency, but it seemed to be stuck on block. So with Litecoin highlighted, I selected "Rescan". Instead of rescanning the Litecoin db, it started rescanning the bitcoin db again.  Is there a command line switch to stop the rescan? I can't wait another 2 weeks. Thanks. |
|
|
|
|
Is there a mode where I can see the value of the [detected optimal vector] and [detected optimal worksize] and [Intensity]? Like a debug mode?
Thanks.
Edit: Found the Debug option under Display options, but can't read the output too well. Is there an option to write to a log file as well?
Edit: I figured out how to change the Intensity, but I can't tell what the current value is.
Still can't find the values for [detected optimal vector] or [detected optimal worksize].
|
|
|
|
Luke: Compare the temp at:
OCL 1: 43.5C | 72.07/71.53/69.48Mh/s | A:186 R:0+0(none) HW:0/none
to the temp in this line:
1 63.0C | 72.15/71.53/69.50Mh/s | A:186 R:0+0(none) HW:0/none
The 43.5C matches the temp of the GPU I'm not running BFGMiner on.
-------------------------------------------------------------------------
bfgminer version 3.4.0 - Started: [2013-11-07 14:35:34] - [ 0 days 03:11:38]
[M]anage devices [P]ool management [ S]ettings [D]isplay options [H]elp [Q]uit
Connected to us1.bitminter.com diff 1 with stratum as user ThinkFast_RHD5570bfg
Block: ...5c6ba0ca #268456 Diff:511M ( 3.66Ph/s) Started: [17:40:03]
ST:2 F:0 NB:19 AS:0 BW:[ 85/ 4 B/s] E:0.37 I: 2.85uBTC/hr BS:77
1 63.0C | 72.15/71.53/69.50Mh/s | A:186 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
OCL 0: 63.0C | OFF / 0.0/ 0.0 h/s | A: 0 R:0+0(none) HW:0/none
OCL 1: 43.5C | 72.07/71.53/69.48Mh/s | A:186 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
[2013-11-07 17:30:14] Accepted 3332c6d8 OCL 1 Diff 5/1
[2013-11-07 17:30:30] Accepted 35aa2f20 OCL 1 Diff 4/1
[2013-11-07 17:31:10] Accepted ef767eb3 OCL 1 Diff 1/1
Thanks.
I:\bfgminer-3.5.1-win32>bfgminer -n [2013-11-14 23:57:45] CL Platform 0 vendor: Advanced Micro Devices, Inc. [2013-11-14 23:57:45] CL Platform 0 name: AMD Accelerated Parallel Processing [2013-11-14 23:57:45] CL Platform 0 version: OpenCL 1.1 AMD-APP (851.4) [2013-11-14 23:57:45] Platform 0 devices: 2 [2013-11-14 23:57:45] 0 ATI RV770 [2013-11-14 23:57:45] 1 Redwood [2013-11-14 23:57:45] GPU 0 ATI Radeon HD 5570 hardware monitoring enabled [2013-11-14 23:57:45] GPU 1 ATI Radeon HD 4800 Series hardware monitoring enabled [2013-11-14 23:57:45] 2 GPU devices max detected I:\bfgminer-3.5.1-win32> GPU 0 is the card that's mining. I didn't see any response to this. Am I misunderstanding something? Thanks. Edit: Could this be fixed by setting the gpu-map option? |
|
|
|
|
Wow. Takes a long time to build the btc database. It's been working on it over 7 days now (210,000/26X,XXX). Seems to be going a lot faster now though.
|
|
|
|
[Resolved] Is this bfgminer.conf file syntactically correct? "pools" : [
{
"url" : "http://mint.bitminter.com:8333",
"user" : "xxxxxxxxxxxxxxxxxxxx",
"pass" : "xxxxx"
},
{
"url" : "http://mint.bitminter.com:8332",
"user" : "xxxxxxxxxxxxxxxxxxxx",
"pass" : "xxxxx"
}
]
"quiet-work-updates" : true
|
|
|
|
|
Luke: Compare the temp at OCL 1: 43.5C to 2 lines above of 1: 63.0C. Is this correct?
-------------------------------------------------------------------------
bfgminer version 3.4.0 - Started: [2013-11-07 14:35:34] - [ 0 days 03:11:38]
[M]anage devices [P]ool management [ S]ettings [D]isplay options [H]elp [Q]uit
Connected to us1.bitminter.com diff 1 with stratum as user ThinkFast_RHD5570bfg
Block: ...5c6ba0ca #268456 Diff:511M ( 3.66Ph/s) Started: [17:40:03]
ST:2 F:0 NB:19 AS:0 BW:[ 85/ 4 B/s] E:0.37 I: 2.85uBTC/hr BS:77
1 63.0C | 72.15/71.53/69.50Mh/s | A:186 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
OCL 0: 63.0C | OFF / 0.0/ 0.0 h/s | A: 0 R:0+0(none) HW:0/none
OCL 1: 43.5C | 72.07/71.53/69.48Mh/s | A:186 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
[2013-11-07 17:30:14] Accepted 3332c6d8 OCL 1 Diff 5/1
[2013-11-07 17:30:30] Accepted 35aa2f20 OCL 1 Diff 4/1
[2013-11-07 17:31:10] Accepted ef767eb3 OCL 1 Diff 1/1
Thanks.
|
|
|
|
Is there a way to change the path of the udb files to a different partition?
Because I have multiple partitions and they won't fit on my C drive.
TiA
set %COIN_APPDATA% environment variable Do I need to reinstall Ufasoft after setting this variable? Edit: Should the Env var be set to "D:\My Documents and Settings\ccdu\Application Data" and then the program will append "\Ufasoft\Coin"? |
|
|
|
|
Is there a way to change the path of the udb files to a different partition?
Because I have multiple partitions and they won't fit on my C drive.
TiA
|
|
|
|
|
[Resolved]Where do I put the Prebuilt Bitcoin.udb, Namecoin.udb files?
Thanks.
|
|
|
|
|
Yeah...You might be right.
I will try it on my HD5570 to confirm.
|
|
|
|
|
