Thank you just quick question when i try to overclock with MSI afterburner i was getting 30MH/s but when i was using wattman i got 31MH/s so can i overclock with wattman and undervolt with MSI Afterburner ?

Hi this is my first mining rig that i build so i just want to ask you guys what do you think about my rig. Iam planing to build one more with 8 GPUs if i can find the same one
Iam using Windows 10 PRO 64 bit and Iam mining on Claymore miner on ethmine.org pool. I was thinking to switch to Simple Miner but so far everything is good so i will keep mining on Windows. The only problem that i had during this build was the faulty Riser.
So here is some pictures from my rig and my config on the pictures you will see only 5 GPU that is because i had some problem with the seller. But i ordered one more and it one the way should be here in like one or two days






So this is what i have
Motherboard: Gigabyte GA-H110-D3A
CPU: Intel Celeron C3900
RAM: PNY Anarchy X 8GB
SSD: Kingston 120GB
PSU: EVGA 1000 GQ
PSU2: EVGA 650 GQ
GPU: 5x(for now) Sapphire NITRO+ RX 580 8GB (Samsung Memmory)

I modded the bios setting for this cards and here is my overclocking



The temperature is around 50C with fan speed around 70%


And my Hash Rate is around 31MH/s



My Power consumption is around 820KW/h on this picture is around 840KW/h because i hooked up my monitor on the same plug


So is there anything that i can change to improve .
PS Iam using Wireless adapter

Yes i flashed all of them i copy timing from 1:1750 and paste it on 1:2000

Here is the driver that iam using


And i used this to tweak my windows https://mega.nz/#!8gZzjQaa!Dt4wE0WEo8nZkui_-cAAXL4mb4YlO6CJgFZTXKq9pnQ

and also i increased my Virtual Memory
INCREASE VIRTUAL MEMORY
In search type “This PC“, right click on it and choose “Properties“
Then click on “Advanced System Settings“
On “Advanced” tab where it says “Performance” click on “Settings“
Click “Advanced” tab
At the bottom you will see “Virtual memory“, click on “Change“
1. Uncheck “Automatically manage paging file size for all drives“
2. Check “Custom size“
3. In the “Initial size (MB)” type: 16000 (or directly 16000)
4. In the “Maximum size (MB)” type: 20000 (or more like 20k)
5. Click “Set” , then “OK” and “Apply“
Restart the rig