No, has nothing changed.
My BJ is batch 2, PCB 1.1.

I said out there but I repeat, memory card in the Rpi was unstable, with a piece of cardboard stopped moving and no more problems, so far...

Around 82-87ºC

BTCGuild says 467.14
Minepeon 495

Someone might raise the clock speed to 640MHz over and get a stable result?

For now I'm with 640MHz, with less than 0.12% of rejections, I still use cgminer 3.9.0h2...

I had the same problem, apparently the memory card is somewhat loose in Rpi, then you place a piece of cardboard to fit better and it works, so far ...

Online without problem 

Hello,
Thank you for doing business with me, you can post feedbacks about trades and mining rig rents in here.

I have the 1.1 Rev PCB (batch 2) and whit cpu at 640MHz im getting 470-510GH/s, the pool inform 450GH/s without update the firmware.

Same issue here, i try to update via windows and didn´t work...

In the main page ther´s a list whit all the Url´s:

https://www.multipool.us/

hi, after doing some tests my BJ is going well
would like to make a couple of questions:

1 - with 600mhz cpu clock to get 450gh / s stable, with temperatures of 80 ° C, less than 1% error, someone has proven more stable mhz system?

2 - The fan noise is really high, probe disconnecting one and it turns out that actually make noise are the cooling radiator, the other 3 are silent, no way to lower the speed of the two fans or your I change default by less noisy? (my BJ's in my living room, it's really annoying)....

3 - 24h in btcguild, my gain was 0.05 BTC, is right? is little? Recommend me some other pool? (According to a calculator difficulty should win daily 0.07)

thanks for reading until here

Enviame un MP.

//Vives en Argentina? Sino dificil que te lo haga llegar...


Bueno, el aparatejo ya esta funcionando, parece mas dificil de lo que es, he elegido BTCguild, viene configurado para conectarse a Eligius, pero como no encontre la manera de que me deposite directamente en mi monedero en su pagina y el monedero que trae de serie, obviamente, no me genera confianza.
Lo raro es que no me deje agregar una direccion nueva, en la interfaz web solo muestra el que trae, sin opcion de cambiarlo 

Segui estos pasos:

Setup Guide:

1. Plugin the Ethernet and power into the raspberry pi. Connect the provided USB cord from the pi to the back of the baby jet.
2. Turn on the power on the back of the baby jet.
3. Log into your router to find the IP (I think it uses DHCP, so yours will probably be different but in my case it was 192.168.0.12) it will be labeled as "MinePeon".
4. Point your browser to the pi's IP address
5. Log in using the username minepeon and password peon
5a. The password AND username are case sensitive.
6. Edit your pool information in the MinePeon software by clicking on the "Pools" tab, hit submit and you're good to go!


Un punto importante es que el minero no arranca, ni siquiera los ventiladores, hasta que esta conectado al USB del RPi, a no asustarse (como yo  ).
Una vez conectado el usb, cgminer lo detecta automaticamente y comienza a minar.

Con respecto a la velocidad, el monitor dice 415.6Gh/s, pero la pagina de BTCGuild 381.7Gh/s, he leido que a la mayoria le da diferencia en menos...

PD: Con mas tiempo buscare la manera de hacer OC.
PD2: Los ventiladores son algo ruidosos, seguramente los voy a cambiar.
PD3: No pense que estaria tan bien construido, sinceramente mis felicitaciones a HF por la calidad del equipo.

 

resulta que el aparato llego a casa... a jugar con el cacharro a ver que tal 

Gracias por el link bitbar y por tomarte el tiempo para contestar.

Pero como dije en el post, ya estoy leyendo el hilo en ingles y mi lengua nativa es el castellano, por eso abro este hilo aqui, en la seccion Español  

Espero encontrar algunos hispanohablantes interesados en este cacharro.

La semana que viene subo algunas fotos, estoy configurandolo ahora mismo.

Editado.

Hola a todos!
Que pool me recomiendan para minar LTC?

Gracias por la ayuda.

Gracias por la informacion.

Como muchos en le foro, recomiendas no minar en BTCGuild... estoy por comenzar a minar, que pool recomiendas?

Saludos

I am the buyer of a baby jet batch 2,
Someone I could say that I order the return date of the money?
Pay in dollars, not in bitcoins and I want my money back

thank you very much!

+1

I need to many fans in a liquid cooled system (CoolIT Cooling System)?
I pay for a system with liquid cooling ... no photo or CAD ¨picture¨?