Thanks for the help! I reinstalled the Amd mining driver and now it’s getting 2 mh/s higher than it was before the update. Lol I also disabled updates so this doesent happen again! Thank you!

Windows 10 updated and now my etherum miner will only recognize 1 gpu not the 2 installed. Also, this gpu is now hashing 10 mh/s less than it was an hour ago! How can I fix this? Both gpuz and msi afterburner recognize 2 gpus.

Thank you for your help! The mining driver took me from a combined hash rate of 33.5 mh/s to now getting 44.3 mh/s. Ill have to play with overclocking again though as taking my memory clock from 1750 to 1850 dropped my hashrate to 42 mh/s, quite the conundrum. Thanks again!

I’m using google claymore miner, im not sure of the version it was whatever nanopool linked to. As for the driver I am using 22.19.677.257 which appears to be the up to date driver for these cards released in September of this year.

Thanks for the reply! The psu is a 750 watt unit from Corsair. Currently they are showing a draw of 108 watts a piece in msi afterburner and the psu is drawing 370 watts at the wall. Also, you are correct the original pc was built in 09 or 2010.

Hey guys and gals, I am new to crypto mining. I had a gaming PC I built about 7 years ago (if only I had started mining back then) I bought and installed 2 MSI RX570’s 8 GB versions and am only getting a cumulative hashrate of about 33.5 mh/s ETH with the memory clock set to 2100 mhz. They have the Hynix memory and I have not yet done the bios mod but it seems as though I should be getting 50 mh/s. In terms of the system specs it is a core I7 920 and have 6gb of ddr2 memory I believe and I am running windows 10 currently. Thank you for your help!