I got ripple good amount

It appears that you either have a 7850 or 7870 GPU. If your system is a prebuilt one, could you specify the brand and model?: I bought all the parts 5 years back and my technician came and assembled it

With a 7850 or 7870, you could consider mining equihash coins (such as Zcash) or cryptonight coins (such as Monero and Electroneum). (Cgminer 3.7.2 does not support either of these.): If cgminer wont work then which software would work to mine Monero or Electroneum. Monero would be the best

Depending on your power costs, it may or may not be profitable to mine with a single old graphics card. (Mining is definitely not a get-rich-quick scheme, regardless.) Do your own research here.. Will this card lasts for 2months atleast. If yes and if it gives me $4 a day then with that I can buy a good one

GPU-mining SHA256 coins (such as Bitcoin) or scrypt coins (such as Litecoin) hasn't been practical for years, since cost-effective ASICs are available for those algorithms.

Undefined frankly speaking I dont know what can I mine with my card as I am a rookie and trying to start with mining which could make me little bit money so that I can then buy a good graphic card for mining. So if you can guide me what should I mine with the current configuration that I have and it would really be helpful and would really be grateful to u

Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.170913-0600)
           Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
       System Model: System Product Name
               BIOS: BIOS Date: 12/15/15 16:37:02 Ver: 22.03
          Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (4 CPUs), ~3.4GHz
             Memory: 8192MB RAM
Available OS Memory: 3544MB RAM
          Page File: 4172MB used, 2912MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
 System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 32bit Unicode

=========

---------------
Display Devices
---------------
          Card name: AMD Radeon HD 7800 Series
       Manufacturer: Advanced Micro Devices, Inc.
          Chip type: AMD Radeon Graphics Processor (0x6819)
           DAC type: Internal DAC(400MHz)
         Device Key: Enum\PCI\VEN_1002&DEV_6819&SUBSYS_27301462&REV_00
     Display Memory: 3545 MB
   Dedicated Memory: 2029 MB
      Shared Memory: 1515 MB
       Current Mode: 1920 x 1080 (32 bit) (60Hz)
       Monitor Name: Generic PnP Monitor
      Monitor Model: DELL U2312HM
         Monitor Id: DEL4072
        Native Mode: 1920 x 1080(p) (60.000Hz)
        Output Type: DVI
        Driver Name: aticfx32.dll,aticfx32.dll,aticfx32.dll,atiumdag.dll,atidxx32.dll,atiumdva.cap
Driver File Version: 23.20.15002.0011 (English)
     Driver Version: 23.20.15002.11
        DDI Version: 11
       Driver Model: WDDM 1.1
  Driver Attributes: Final Retail
   Driver Date/Size: 12/7/2017 04:56:46, 1554952 bytes
        WHQL Logo'd: Yes
    WHQL Date Stamp:
          Vendor ID: 0x1002
          Device ID: 0x6819
          SubSys ID: 0x27301462
        Revision ID: 0x0000
 Driver Strong Name: oem41.inf:ATI.Mfg.NTx86.6.1:ati2mtag_R575B:23.20.15002.11:pci\ven_1002&dev_6819
     Rank Of Driver: 00E62001
        Video Accel:
      Deinterlace Caps: n/a
       D3D9 Overlay: Not Supported
            DXVA-HD: Not Supported
       DDraw Status: Enabled
         D3D Status: Enabled
         AGP Status: Enabled

I am getting error message and this is my config file below: Can someone correct it for me please if I am doing anything wrong. Also here is the command prompt &config file screenshot: "http://tinypic.com/r/2echkw3/9" And also my dxdiag screenshot here "http://tinypic.com/r/2rr14ap/9" and my slushpool screenshot: "http://tinypic.com/r/ebanog/9"  I would really appreciate your help and guidance in advance.


{
"pools" : [
   {
      "url" : "stratum+tcp://east1.sg.stratum.slushpool.com:3333",
      "user" : "chandann",
      "pass" : "password"
   },
        {
      "url" : "stratum+tcp://west1.sg.stratum.slushpool.com:3333",
      "user" : "chandann",
      "pass" : "password"
   },
   
]
,
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048,",
"gpu-engine" : "0-0",
"gpu-fan" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "75",
"temp-overheat" : "85",
"temp-target" : "65",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

I am getting error message and this is my config file below: Can someone correct it for me please if I am doing anything wrong. Also here is the command prompt &config file screenshot: "http://tinypic.com/r/2echkw3/9" And also my dxdiag screenshot here "http://tinypic.com/r/2rr14ap/9" and my slushpool screenshot: "http://tinypic.com/r/ebanog/9"  I would really appreciate your help and guidance in advance.


{
"pools" : [
   {
      "url" : "stratum+tcp://east1.sg.stratum.slushpool.com:3333",
      "user" : "chandann",
      "pass" : "password"
   },
        {
      "url" : "stratum+tcp://west1.sg.stratum.slushpool.com:3333",
      "user" : "chandann",
      "pass" : "password"
   },
   
]
,
"intensity" : "13",
"vectors" : "1",
"worksize" : "256",
"kernel" : "scrypt",
"lookup-gap" : "2",
"thread-concurrency" : "8192",
"shaders" : "2048,",
"gpu-engine" : "0-0",
"gpu-fan" : "0",
"gpu-memclock" : "0",
"gpu-memdiff" : "0",
"gpu-powertune" : "0",
"gpu-vddc" : "0.000",
"temp-cutoff" : "75",
"temp-overheat" : "85",
"temp-target" : "65",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"scrypt" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

Thank you for your advice. Nothing is impossible afaik. Within 3 months with these 20$ investment I will achieve $200 and I wont invest a single penny at all. With this much investment, research and hardwork I will achieve my goals

I have got 100 verge at binance. What should I trade with. I want to learn how to make atleast $20 a day just by trading from home. Just a newbie trying to learn trading. Any expert opinions or guidance or suggestions please?