 Show Posts
|
|
Pages: [1]
|
Great.. it worked. Thanks for your help. Highly appreciate.  |
|
|
|
|
Hi,
I tried but TRM doesn’t start with those additions at the end.
|
|
|
|
|
Hi,
Please see the command line for both GPUs together.
teamredminer.exe -a ethash -o stratum+tcp://eu1.ethermine.org:4444 -u 0x789FFf9——————-BD8A37165eE5655.abd -p x --enable_compute
|
|
|
|
|
Yes, I tried disabling 1 GPU in one instance and enabling it in the second instance but it shuts down both the instances. Even if I run two different miners i.e TRM and Phoenix they both will not work.
|
|
|
|
|
Hi,
Does anyone know how to run two instances of same miner at the same time and both will have own dedicated GPUs as I want to mine different coins and don’t want dual mining.
I am using Team Red Miner.
Thanks for the help.
|
|
|
|
|
Hi there,
Since I have downloaded the new version it works perfectly untill I start CPU miner and all of sudden rig crashes, even if I start afterburner or crimson it crashes.
Anyone has any idea why? I did try to reduce clocks but still it crashes.
Regards
|
|
|
|
hey man i wanna minning please guide me
What help do you want? |
|
|
|
Hi all,
Does anyone knows how to reduce stale shares? Currently I have 10-15% stale shares mining ETH but no invalid shares.
Any help would be appreciated.
Thanks
What pool? The faster the pool solves blocks the more likely you will have stales. Also if the pool difficulty is set too high that will cause stales. But too low causes a lot of traffic. Also remember the higher the difficulty the more you are losing on stales because larger shares are worth more. I'm on anorak which has 3 different levels of difficulty. I am on Ethermine and solo mine ETH. Should I try other pools? |
|
|
|
|
Hi all,
Does anyone knows how to reduce stale shares? Currently I have 10-15% stale shares mining ETH but no invalid shares.
Any help would be appreciated.
Thanks
|
|
|
|
Update on my little rig.
Moved from 11 to 11.5 - dual mining XVG - hash rate improved by 0.5 per card but more importantly my stale shares reduced from 6/7% down to 2/3%
I’m using bios mod AMD with Blockchain drivers on win10. I did not try the oldkernels command as all seems to be in order
Strange, my power usage hasn't gone up but ETH M/hs has gone by 1 m/hs. I will try the other one as you mentioned. Thanks |
|
|
|
|
It has worked, but not getting any shares, only get m/hs. Probably will have to keep running for a while.
Supernova account is showing hashes.
|
|
|
|
Does anyone knows why I am getting message
DCR: Authorization Failed
:NULL
I am starting dual mining and Eth is running ok but DCR is giving me the above message although it generates hashes but no share.
Any help would be appreciated?
pls post your bat file here you go my friend: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x789FFf9C69343a33d4f675916BD8A37165eE5655.E1 -epsw x -mode 1 -dpool dcr-gw.suprnova.cc:3252 -dwal DsRGTStjvXTf1wkSiEnGzTotWhxHEvqS9kn -dpsw x -dcri 7 |
|
|
|
|
Does anyone knows why I am getting message
DCR: Authorization Failed
:NULL
I am starting dual mining and Eth is running ok but DCR is giving me the above message although it generates hashes but no share.
Any help would be appreciated?
|
|
|
|
If anyone has any insight on this, been reading/searching for some time and cannot figure it out:
Have a single rig with 4x1050 TI and 1xRX 560 (yes, I'm small time - but sorry, already taken, ladies). Running v11.4 as 11.5 keeps locking the PC up completely. AMD drivers are 17.12.1. Mining in ETH only mode. Zero hardware errors on HWInfo and no BIOS/clock/voltage/power modifications on the AMD.
The AMD card is showing a hashrate of ~9.18 vs ~13.5 on all the Nvidia cards. Miner showing 0 rejected/incorrect shares after 24 hours of mining. AMD card has right at 50% of the average shares of the 4 Nvidias - on nanopool if that matters. Looking at the submissions from the logs and all the shares from the Nvidia cards are accepted within ~170ms, but the AMD are ~2200ms?
Trying to understand the variance on the AMD - if I go by the hash rate vs the Nvidias, it should be closer to 68% not 50%, and what is the deal with the shares taking so long to be accepted from this one card? Thanks
I have 560 and it gives me 14 m/hs with 1975 memory clock. |
|
|
|
|
Hi all,
Not sure why miner can't connect to DCR when dual mining.
I get the message:
DCR: Stratum - cannot connect to yiimp.ccminer.org:3252
DCR: Stratum - failed to connect try in 20 second
and it keep repeating the same.
ETH is mining perfectly.
Anyone one knows the reason please let me know.
Thanks
|
|
|
|
GPU hangs are most often from to a high overclock, especially on the memory or too much undervolt for that card. Sometimes draining all the power from the capacitors also helps reset the GPU's and risers. Shutdown down the rig, cutoff the power to the PSU with the switch on the back and press the power button to drain all the power. Then after 1-2 minutes turn the rig back on.
Thanks, let me try this out. I did memory bios flash to the max, if turn off doesn't work I will 're flash to lower MHz. Tried complete shut down and 're start but did not work. Then reduce men clock from 2250 to 2200 and miner worked longer than before before 're-start. I think I will have find the balance set up to get this going. However, on monero it doesn't give any problem but 8 gb card gives less hashes proportionate to 4th. 4gb gives 413 and 8 gb 830 hashes which is almost 2 times of 4gb. Whereas, on eth 4gb is 13 mhs and 8 gb is 31 mhs which is almost 2.5 times of 4 gb. |
|
|
|
GPU hangs are most often from to a high overclock, especially on the memory or too much undervolt for that card. Sometimes draining all the power from the capacitors also helps reset the GPU's and risers. Shutdown down the rig, cutoff the power to the PSU with the switch on the back and press the power button to drain all the power. Then after 1-2 minutes turn the rig back on.
Thanks, let me try this out. I did memory bios flash to the max, if turn off doesn't work I will 're flash to lower MHz. |
|
|
|
|
Hi,
I am new to the mining and downloaded latest version today. I am having some problem with GPU1 as it shows 32 mhs at start but then goes to 0 mhs.
Afterwards it re-starts and do the same, if anyone know the solution then please let me know.
Not sure how to attach files so please have a look at the cut /paste below from log file.
Thanks to Claymore for putting it together and others for helping out.
13:14:20:989 a74 ETH: 03/10/18-13:14:20 - New job from eu1.ethermine.org:4444
13:14:21:005 a74 target: 0x0000000112e0be82 (diff: 4000MH), epoch 174(2.36GB)
13:14:21:005 a74 ETH - Total Speed: 45.994 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
13:14:21:020 a74 ETH: GPU0 13.936 Mh/s, GPU1 32.057 Mh/s
13:14:24:052 a74 buf: {"id":0,"jsonrpc":"2.0","result":["0x4fa286e89ea9cb5a918c69bcb81627931044886e5e755d66da83ae571becb38d","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf4f"]}
13:14:30:912 a74 buf: {"id":3,"jsonrpc":"2.0","result":["0xd8fb349a22f7d97de8577d48867720fbe1b85fd8c2cde9ff0b6b4e11415f2f1a","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf50"]}
13:14:30:959 a74 buf: {"id":6,"jsonrpc":"2.0","result":true}
13:14:31:881 a74 buf: {"id":0,"jsonrpc":"2.0","result":["0x5bc8361f3be366fecc2d3d87c9473dab362dd8cdbfd6b9789816ffcfeb5d7255","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf51"]}
13:14:31:881 a74 ETH: 03/10/18-13:14:31 - New job from eu1.ethermine.org:4444
13:14:31:897 a74 target: 0x0000000112e0be82 (diff: 4000MH), epoch 174(2.36GB)
13:14:31:897 a74 ETH - Total Speed: 13.946 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
13:14:31:913 a74 ETH: GPU0 13.946 Mh/s, GPU1 0.000 Mh/s
13:14:40:851 a74 ETH: checking pool connection...
13:14:40:851 a74 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
13:15:30:906 a74 buf: {"id":6,"jsonrpc":"2.0","result":true}
13:15:30:968 a74 ETH: checking pool connection...
13:15:30:968 a74 sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
13:15:31:031 a74 buf: {"id":3,"jsonrpc":"2.0","result":["0x791a6a55e7a1627a35a3f696fbdaeeb2062a4009a6c53c5f1d41e8c42c816d82","0x32a2478e57a4b36e5f5e5420e5443a5a82dac6ff01a0548737fada91d743d7d0","0x0112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x4fcf54"]}
13:15:32:140 1354 em hbt: 15, fm hbt: 47,
13:15:32:140 1354 watchdog - thread 0 (gpu0), hb time 62
13:15:32:140 1354 watchdog - thread 1 (gpu0), hb time 359
13:15:32:156 1354 watchdog - thread 2 (gpu1), hb time 66313
13:15:32:156 1354 WATCHDOG: GPU 1 hangs in OpenCL call, exit
13:15:32:172 1354 watchdog - thread 3 (gpu1), hb time 65765
13:15:32:172 1354 WATCHDOG: GPU 1 hangs in OpenCL call, exit
13:15:32:297 1354 Quit, please wait...
13:15:43:236 1354 Restarting OK, exit...
|
|
|
|
|
