 Show Posts
|
|
Pages: [1]
|
|
Hi
I am looking for Antminer S5 working hash board to deliver in UK/Ireland.
Thanks
|
|
|
|
|
Thanks for the responses and help.
I changed the PSU still same hash power. So I can rule out issue with PSU. I will follow the steps suggested.
|
|
|
|
Hi My Antminer S5 is not working since morning https://ibb.co/eLQskxShowing Chain #1: as -------- -----x-- -------- -----x [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495540k/495540k available, 28748k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000355] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015412] pid_max: default: 32768 minimum: 301
[ 0.015656] Security Framework initialized
[ 0.015751] Mount-cache hash table entries: 512
[ 0.025683] Initializing cgroup subsys cpuacct
[ 0.025716] Initializing cgroup subsys memory
[ 0.025780] Initializing cgroup subsys blkio
[ 0.025924] CPU: Testing write buffer coherency: ok
[ 0.026469] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026548] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027945] Brought up 1 CPUs
[ 0.027969] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029263] devtmpfs: initialized
[ 0.093774] pinctrl core: initialized pinctrl subsystem
[ 0.093988] rstctl core: initialized rstctl subsystem
[ 0.094484] regulator-dummy: no parameters
[ 0.094994] NET: Registered protocol family 16
[ 0.095757] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105548] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106328] platform 49000000.edma: alias fck already exists
[ 0.106360] platform 49000000.edma: alias fck already exists
[ 0.106388] platform 49000000.edma: alias fck already exists
[ 0.107590] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107775] OMAP GPIO hardware version 0.1
[ 0.109114] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110441] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111907] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112443] of_get_named_gpio_flags exited with status 52
[ 0.112474] gpio-rctrl rstctl.3: loaded OK
[ 0.117290] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120549] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122772] cpsw.0: No hwaddr in dt. Using d0:5f:b8:e2:4f:73 from efuse
[ 0.122854] cpsw.1: No hwaddr in dt. Using d0:5f:b8:e2:4f:75 from efuse
[ 0.138307] bio: create slab <bio-0> at 0
[ 0.150444] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150681] of_get_named_gpio_flags: can't parse gpios property
[ 0.150895] vmmcsd_fixed: 3300 mV
[ 0.153938] SCSI subsystem initialized
[ 0.154430] usbcore: registered new interface driver usbfs
[ 0.154561] usbcore: registered new interface driver hub
[ 0.154840] usbcore: registered new device driver usb
[ 0.156910] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158427] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160176] DCDC1: at 1500 mV
[ 0.161324] vdd_mpu: 925 <--> 1325 mV at 1325 mV
[ 0.162473] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.163574] LDO1: at 1800 mV
[ 0.164722] LDO2: at 3300 mV
[ 0.166705] LDO3: 1800 mV
[ 0.167817] LDO4: at 3300 mV
[ 0.168808] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.169514] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170316] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.172643] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.172888] media: Linux media interface: v0.10
[ 0.172991] Linux video capture interface: v2.00
[ 0.173114] pps_core: LinuxPPS API ver. 1 registered
[ 0.173130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.173999] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175172] Switching to clocksource gp_timer
[ 0.193407] NET: Registered protocol family 2
[ 0.194423] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.194566] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.194728] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.194891] TCP: reno registered
[ 0.194923] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.194969] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195391] NET: Registered protocol family 1
[ 0.195955] RPC: Registered named UNIX socket transport module.
[ 0.195977] RPC: Registered udp transport module.
[ 0.195991] RPC: Registered tcp transport module.
[ 0.196005] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196374] Trying to unpack rootfs image as initramfs...
[ 2.124559] Freeing initrd memory: 14748K
[ 2.125230] CPU PMU: probing PMU on CPU 0
[ 2.125261] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.125787] omap2_mbox_probe: platform not supported
[ 2.129733] VFS: Disk quotas dquot_6.5.2
[ 2.129971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.131335] NFS: Registering the id_resolver key type
[ 2.131495] Key type id_resolver registered
[ 2.131512] Key type id_legacy registered
[ 2.131580] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.132065] msgmni has been set to 996
[ 2.134917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.134942] io scheduler noop registered
[ 2.134958] io scheduler deadline registered
[ 2.135011] io scheduler cfq registered (default)
[ 2.136810] tps65217-bl tps65217-bl: no platform data provided
[ 2.136850] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.137768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.140540] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.140824] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.858108] console [ttyO0] enabled
[ 2.863006] [drm] Initialized drm 1.1.0 20060810
[ 2.881619] brd: module loaded
[ 2.891848] loop: module loaded
[ 2.895307] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.902600] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.909878] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.917155] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.924423] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.962406] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.501469] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.040525] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.579586] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.118650] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.657711] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.196777] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.735836] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.274900] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.813961] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.321945] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.329014] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.338569] nand_get_flash_type: 2c,da against 2c,da
[ 8.344094] ONFI param page 0 valid
[ 8.347767] ONFI flash detected
[ 8.351086] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.362997] omap2-nand: detected x8 NAND flash
[ 8.367660] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.373262] omap2-nand: using custom ecc layout
[ 8.378100] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.384490] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.390161] 0x000000000000-0x000000020000 : "spl"
[ 8.397033] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.404479] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.411885] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.419167] 0x000000080000-0x000000240000 : "u-boot"
[ 8.427433] 0x000000240000-0x000000260000 : "bootenv"
[ 8.434400] 0x000000260000-0x000000280000 : "fdt"
[ 8.441028] 0x000000280000-0x000000780000 : "kernel"
[ 8.452054] 0x000000800000-0x000001c00000 : "root"
[ 8.475463] 0x000001c00000-0x000003000000 : "config"
[ 8.499227] OneNAND driver initializing
[ 8.506720] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.514008] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.524255] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.531536] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.540807] usbcore: registered new interface driver asix
[ 8.546653] usbcore: registered new interface driver cdc_ether
[ 8.552932] usbcore: registered new interface driver smsc95xx
[ 8.559053] usbcore: registered new interface driver net1080
[ 8.565076] usbcore: registered new interface driver cdc_subset
[ 8.571383] usbcore: registered new interface driver zaurus
[ 8.577367] usbcore: registered new interface driver cdc_ncm
[ 8.584119] usbcore: registered new interface driver cdc_acm
[ 8.590075] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.598453] Initializing USB Mass Storage driver...
[ 8.603679] usbcore: registered new interface driver usb-storage
[ 8.609978] USB Mass Storage support registered.
[ 8.615003] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.621666] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.626903] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.635667] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.635689] musb-hdrc: MHDRC RTL version 2.0
[ 8.635703] musb-hdrc: setup fifo_mode 4
[ 8.635733] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.635882] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.640925] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.646890] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.652138] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.660901] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.660921] musb-hdrc: MHDRC RTL version 2.0
[ 8.660935] musb-hdrc: setup fifo_mode 4
[ 8.660958] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.661077] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.666118] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.671425] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.677811] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.686047] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.686159] usb usb1: default language 0x0409
[ 8.686217] usb usb1: udev 1, busnum 1, minor = 0
[ 8.686241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.693369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.700939] usb usb1: Product: MUSB HDRC host driver
[ 8.706152] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.711819] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.717684] usb usb1: usb_probe_device
[ 8.717711] usb usb1: configuration #1 chosen from 1 choice
[ 8.717776] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.717987] hub 1-0:1.0: usb_probe_interface
[ 8.718010] hub 1-0:1.0: usb_probe_interface - got id
[ 8.718036] hub 1-0:1.0: USB hub found
[ 8.722072] hub 1-0:1.0: 1 port detected
[ 8.726242] hub 1-0:1.0: standalone hub
[ 8.726262] hub 1-0:1.0: individual port power switching
[ 8.726281] hub 1-0:1.0: no over-current protection
[ 8.726299] hub 1-0:1.0: Single TT
[ 8.726320] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.726340] hub 1-0:1.0: power on to power good time: 10ms
[ 8.726384] hub 1-0:1.0: local power source is good
[ 8.726489] hub 1-0:1.0: enabling power on all ports
[ 8.727534] mousedev: PS/2 mouse device common for all mice
[ 8.735904] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.743382] 44e3e000.rtc: already running
[ 8.747874] i2c /dev entries driver
[ 8.753243] pps_ldisc: PPS line discipline registered
[ 8.758728] Driver for 1-wire Dallas network protocol.
[ 8.766015] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.773583] cpuidle: using governor ladder
[ 8.777904] cpuidle: using governor menu
[ 8.782455] of_get_named_gpio_flags exited with status 6
[ 8.782475] of_get_named_gpio_flags: can't parse gpios property
[ 8.782491] of_get_named_gpio_flags: can't parse gpios property
[ 8.782529] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.789748] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.796577] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.803780] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.811135] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.818101] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.827758] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.851605] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.863300] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.870603] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.879631] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.886864] of_get_named_gpio_flags exited with status 53
[ 8.886889] of_get_named_gpio_flags exited with status 54
[ 8.886910] of_get_named_gpio_flags exited with status 55
[ 8.886931] of_get_named_gpio_flags exited with status 56
[ 8.886965] of_get_named_gpio_flags exited with status 53
[ 8.887251] of_get_named_gpio_flags exited with status 54
[ 8.887467] of_get_named_gpio_flags exited with status 55
[ 8.887656] of_get_named_gpio_flags exited with status 56
[ 8.888262] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.894970] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.902161] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.910280] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.916573] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.923769] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.936189] usbcore: registered new interface driver usbhid
[ 8.942104] usbhid: USB HID core driver
[ 8.949071] TCP: cubic registered
[ 8.952606] Initializing XFRM netlink socket
[ 8.957163] NET: Registered protocol family 17
[ 8.961981] NET: Registered protocol family 15
[ 8.966820] Key type dns_resolver registered
[ 8.971465] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.979575] ThumbEE CPU extension supported.
[ 8.984178] Registering SWP/SWPB emulation handler
[ 8.990209] registered taskstats version 1
[ 9.046406] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.052817] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.067220] libphy: 4a101000.mdio: probed
[ 9.071522] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.081398] Detected MACID = d0:5f:b8:e2:4f:73
[ 9.086091] cpsw 4a100000.ethernet: NAPI disabled
[ 9.092742] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.109123] ALSA device list:
[ 9.112254] No soundcards found.
[ 9.116425] Freeing init memory: 264K
[ 9.120350] Failed to execute /init
[ 9.382725] compile Jul 24 2015--13:54:18
[ 9.387015] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.391052] spi_vaddr 0xfa1a0000
[ 9.394430] version 0x40300a0b
[ 9.397620] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.401451] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.405285] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.409683] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.416820] hash ok
[ 9.419046] hashtest OK
[ 9.425607] bitmain-asic: success to register device
[ 9.441224] Detect hardware version = 4
[ 9.445315] fix hardware version
[ 9.448699] hardware_version = 0x4
[ 9.452367] S5 ctrl board test V1.1
[ 9.456108] pwm_percent{20}
[ 9.459216] bitmain_asic_open ok
[ 10.818333] stop send work to all chain
[ 10.823548] Sending open core work
[ 10.828482] Send new block cmd
[ 10.933079] pwm_percent{20}
[ 10.936014] timeout {0x1b57}
[ 10.939030] rev timeout {0x571b0080}
[ 10.942852] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.951032] send BC data:
[ 10.951032] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.960417] send BC data:
[ 10.960417] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.087377] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.095838] send BC data:
[ 11.095838] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.106901] send BC data:
[ 11.106901] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.233857] bitmain_asic_close
[ 11.413308] jffs2: jffs2_scan_dirent_node(): Node CRC failed on node at 0x002e07e8: Read 0xffffffff, calculated 0xae2b5a7f
[ 11.482687] jffs2: Empty flash at 0x002e081c ends at 0x002e1000
[ 11.844781] jffs2: notice: (147) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.663962] net eth0: initializing cpsw version 1.12 (0)
[ 12.671673] net eth0: phy found : id is : 0x7c0f1
[ 12.676632] libphy: PHY 4a101000.mdio:01 not found
[ 12.681652] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.748072] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 32.537449] bitmain-asic: success to unregister device
[ 33.559382] compile Jul 24 2015--13:54:18
[ 33.563694] CM_PER_SPI1_CLKCTRL 0x2
[ 33.567369] spi_vaddr 0xfa1a0000
[ 33.570753] version 0x40300a0b
[ 33.573949] OMAP2_MCSPI_SYSSTATUS 0x1
[ 33.577777] OMAP2_MCSPI_MODULCTRL 0x1
[ 33.581616] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 33.585957] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 33.593079] hash ok
[ 33.595305] hashtest OK
[ 33.598099] bitmain-asic: success to register device
[ 33.724844] Detect hardware version = 4
[ 33.728926] fix hardware version
[ 33.732305] hardware_version = 0x4
[ 33.740074] S5 ctrl board test V1.1
[ 33.747652] pwm_percent{20}
[ 33.755638] bitmain_asic_open ok
[ 33.774489] Detect device
[ 33.777360] soft ctrl rst time
[ 33.780982] reset hash asic
[ 33.784369] clear FPGA nonce buffer
[ 34.786615] soft ctrl rst time
[ 34.789914] reset hash asic
[ 34.792847] clear FPGA nonce buffer
[ 35.895986] clear FPGA nonce buffer
[ 35.899821] get chain0 reg0x0
[ 35.902929] send BC data:
[ 35.902929] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.009342] chain0 total asic:0
[ 36.012635] clear FPGA nonce buffer
[ 36.016410] get chain1 reg0x0
[ 36.019527] send BC data:
[ 36.019527] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 36.126514] asic cmd return ff908213
[ 36.130259] asic cmd return ff908213
[ 36.134001] asic cmd return ff908213
[ 36.137739] asic cmd return ff908213
[ 36.141478] asic cmd return ff908213
[ 36.145285] asic cmd return ff908213
[ 36.149029] asic cmd return ff908213
[ 36.152769] asic cmd return ff908213
[ 36.156510] asic cmd return ff908213
[ 36.160252] asic cmd return ff908213
[ 36.164069] asic cmd return ff908213
[ 36.167817] asic cmd return ff908213
[ 36.171555] asic cmd return ff908213
[ 36.175300] asic cmd return ff908213
[ 36.179036] asic cmd return ff908213
[ 36.182855] asic cmd return ff908213
[ 36.186605] asic cmd return ff908213
[ 36.190343] asic cmd return ff908213
[ 36.194083] asic cmd return ff908213
[ 36.197821] asic cmd return ff908213
[ 36.201631] asic cmd return ff908213
[ 36.205372] asic cmd return ff908213
[ 36.209118] asic cmd return ff908213
[ 36.212860] asic cmd return ff908213
[ 36.216600] asic cmd return ff908213
[ 36.220415] asic cmd return ff908213
[ 36.224161] asic cmd return ff908213
[ 36.227908] asic cmd return ff908213
[ 36.231651] asic cmd return ff908213
[ 36.235395] asic cmd return ff908213
[ 36.239208] chain1 total asic:30
[ 36.242590] pos0--addr:ff
[ 36.245340] pos1--addr:ff
[ 36.248086] pos2--addr:ff
[ 36.250831] pos3--addr:ff
[ 36.253573] pos4--addr:ff
[ 36.256317] pos5--addr:ff
[ 36.259059] pos6--addr:ff
[ 36.261805] pos7--addr:ff
[ 36.264550] pos8--addr:ff
[ 36.267291] pos9--addr:ff
[ 36.270032] pos10--addr:ff
[ 36.272865] pos11--addr:ff
[ 36.275694] pos12--addr:ff
[ 36.278528] pos13--addr:ff
[ 36.281359] pos14--addr:ff
[ 36.284196] pos15--addr:ff
[ 36.287026] pos16--addr:ff
[ 36.289856] pos17--addr:ff
[ 36.292690] pos18--addr:ff
[ 36.295528] pos19--addr:ff
[ 36.298359] pos20--addr:ff
[ 36.301193] pos21--addr:ff
[ 36.304024] pos22--addr:ff
[ 36.306857] pos23--addr:ff
[ 36.309691] pos24--addr:ff
[ 36.312521] pos25--addr:ff
[ 36.315349] pos26--addr:ff
[ 36.318184] pos27--addr:ff
[ 36.321018] pos28--addr:ff
[ 36.323855] pos29--addr:ff
[ 36.326692] chain1_asic_exist{0x3fffffff}
[ 36.330900] total chain_num{2}
[ 36.334096] chain0 chain_map 0
[ 36.337292] chain0 asic_num--0 actual--0
[ 36.341404] chain0 sw addr interval 8
[ 36.345230] chain1 chain_map 1
[ 36.348425] chain1 asic_num--32 actual--30
[ 36.352705] chain1 sw addr interval 8
[ 36.356533] clear FPGA nonce buffer
[ 36.664476] btm_tx_conf
[ 36.667094] fan pwm valid {160}
[ 36.670389] Set asic frequency {350}
[ 36.674131] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x6}cmd_buf[3]{0xc6}
[ 36.682498] send BC data:
[ 36.682498] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 36.692840] send BC data:
[ 36.692840] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x06 0xc6
[ 36.819798] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 36.825645] timeout {0x1b57}
[ 36.828665] rev timeout {0x571b0080}
[ 36.832583] close chain0 core
[ 36.835712] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 36.844165] send BC data:
[ 36.844165] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 36.852993] chain0 inactive
[ 36.855923] send BC data:
[ 36.855923] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 36.866668] send BC data:
[ 36.866668] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x00 0x00 0x19
[ 36.876433] send BC data:
[ 36.876433] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 36.886198] send BC data:
[ 36.886198] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x10 0x00 0x15
[ 36.895964] send BC data:
[ 36.895964] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x18 0x00 0x13
[ 36.905730] send BC data:
[ 36.905730] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x20 0x00 0x01
[ 36.915496] send BC data:
[ 36.915496] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x28 0x00 0x07
[ 36.925261] send BC data:
[ 36.925261] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 36.935027] send BC data:
[ 36.935027] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 36.944792] send BC data:
[ 36.944792] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 36.954558] send BC data:
[ 36.954558] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 36.964324] send BC data:
[ 36.964324] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x50 0x00 0x00
[ 36.974089] send BC data:
[ 36.974089] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x58 0x00 0x06
[ 36.983854] send BC data:
[ 36.983854] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x60 0x00 0x14
[ 36.993620] send BC data:
[ 36.993620] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x68 0x00 0x12
[ 37.003405] send BC data:
[ 37.003405] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x70 0x00 0x18
[ 37.013165] send BC data:
[ 37.013165] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 37.022919] send BC data:
[ 37.022919] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x80 0x00 0x16
[ 37.032683] send BC data:
[ 37.032683] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x88 0x00 0x10
[ 37.042449] send BC data:
[ 37.042449] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 37.052214] send BC data:
[ 37.052214] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 37.061979] send BC data:
[ 37.061979] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 37.071739] send BC data:
[ 37.071739] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 37.081511] send BC data:
[ 37.081511] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 37.091277] send BC data:
[ 37.091277] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 37.101042] send BC data:
[ 37.101042] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 37.110808] send BC data:
[ 37.110808] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 37.120573] send BC data:
[ 37.120573] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 37.130339] send BC data:
[ 37.130339] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 37.140107] send BC data:
[ 37.140107] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 37.149871] send BC data:
[ 37.149871] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 37.159636] send BC data:
[ 37.159636] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 37.171370] send BC data:
[ 37.171370] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 37.181121] send BC data:
[ 37.181121] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 37.190888] Sending open core work
[ 37.194447] Send new block cmd
[ 37.197770] asic cmd return fcbfc01e
[ 37.201521] chain0 reg crc_r{0x1c}crc{0x13} Err ret{0xfcbfc01e}
[ 37.599211] close chain1 core
[ 37.602334] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 37.610793] send BC data:
[ 37.610793] 0x0000: 0x03 0x01 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 37.618615] chain1 inactive
[ 37.621541] send BC data:
[ 37.621541] 0x0000: 0x03 0x01 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 37.632286] send BC data:
[ 37.632286] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x00 0x00 0x19
[ 37.642058] send BC data:
[ 37.642058] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 37.651823] send BC data:
[ 37.651823] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x10 0x00 0x15
[ 37.661589] send BC data:
[ 37.661589] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x18 0x00 0x13
[ 37.671355] send BC data:
[ 37.671355] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x20 0x00 0x01
[ 37.681121] send BC data:
[ 37.681121] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x28 0x00 0x07
[ 37.690894] send BC data:
[ 37.690894] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 37.700653] send BC data:
[ 37.700653] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 37.710484] send BC data:
[ 37.710484] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 37.720193] send BC data:
[ 37.720193] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 37.729949] send BC data:
[ 37.729949] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x50 0x00 0x00
[ 37.739714] send BC data:
[ 37.739714] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x58 0x00 0x06
[ 37.749480] send BC data:
[ 37.749480] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x60 0x00 0x14
[ 37.759304] send BC data:
[ 37.759304] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x68 0x00 0x12
[ 37.769013] send BC data:
[ 37.769013] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x70 0x00 0x18
[ 37.778777] send BC data:
[ 37.778777] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 37.788543] send BC data:
[ 37.788543] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x80 0x00 0x16
[ 37.798308] send BC data:
[ 37.798308] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x88 0x00 0x10
[ 37.808073] send BC data:
[ 37.808073] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 37.817840] send BC data:
[ 37.817840] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 37.827605] send BC data:
[ 37.827605] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 37.837370] send BC data:
[ 37.837370] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 37.847136] send BC data:
[ 37.847136] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 37.858858] send BC data:
[ 37.858858] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 37.868621] send BC data:
[ 37.868621] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 37.878386] send BC data:
[ 37.878386] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 37.888151] send BC data:
[ 37.888151] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 37.897918] send BC data:
[ 37.897918] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 37.907683] send BC data:
[ 37.907683] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 37.917448] send BC data:
[ 37.917448] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 37.927214] send BC data:
[ 37.927214] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 37.936980] send BC data:
[ 37.936980] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 37.946739] send BC data:
[ 37.946739] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 37.956513] Sending open core work
[ 37.960077] Send new block cmd
[ 38.355071] send BC data:
[ 38.355071] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x05 0x18
[ 38.362753] send BC data:
[ 38.362753] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x10 0x05 0x18
[ 38.372547] send BC data:
[ 38.372547] 0x0000: 0x03 0x20 0x00 0x05 0x86 0x10 0x05 0x04
[ 38.380049] timeout {0x176ff}
[ 38.383166] rev timeout {0xff760180}
[ 38.386965] open core
[ 38.389346] send BC data:
[ 38.389346] 0x0000: 0x03 0x00 0x00 0x05 0x86 0x00 0x85 0x0b
[ 38.397912] send BC data:
[ 38.397912] 0x0000: 0x03 0x01 0x00 0x05 0x86 0x00 0x85 0x0b
[ 38.412046] Timeout {3}
[ 38.414614] Snd Time Interval {64}ms
[ 38.418362] Adj Snd Time Interval {64}ms
[ 38.422462] Set bitmain configure
[ 38.425925] clear FPGA nonce buffer
[ 39.440444] get chain0 reg0x4
[ 39.443596] send BC data:
[ 39.443596] 0x0000: 0x03 0x00 0x00 0x05 0x84 0x00 0x04 0x00
[ 39.451946] Change diff to 14
[ 39.455113] diff fix to 6
[ 39.457861] Change net_diff to 42
[ 39.462533] ch1-as0: dev->task_buffer_wr{0x00000020}rd{0x00000000}ret work_id{0x8000} don't match task_buffer_match{0x0000}
[ 39.474274] chain1 - HW1
[ 39.484757] temp_highest{28}
[ 39.487787] Customized fan speed {160}
[ 39.491705] pwm_percent{100}
[ 39.524963] Fan0 speed 2280, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 39.524963] error_fan 5, normal_fan 0, fan_num 1
[ 39.547427]
[ 39.547427] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 39.556697] g_FPGA_FIFO_SPACE 32, fifo_space{16224}
[ 39.561793] ret_nonce_num = 1, snd_to_fpga_work{32}
[ 39.566890] total ret nonce num = 0, diff1_nonce num = 0
[ 39.572441] gDiff_nonce_num{0}gNonce_Err{1}
[ 39.576825] gSubmit_nonce_num{0}
[ 39.580205] chain0 asic00 ret nonce_num{1}
[ 39.584484] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 39.589950] dev->temp_out_ctrl{1}
[ 39.589950]
[ 39.594959] fifo_state 0 temp_state 0 fan_state 1
[ 44.589463] jiffies{-130771}, open{-133934},dev->wait_timeout{1}
[ 44.595763] timeout {0xbb7}
[ 44.598687] rev timeout {0xb70b0080}
[ 49.526986] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 49.526986] error_fan 5, normal_fan 1, fan_num 1
[ 49.549464]
[ 49.549464] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 49.558738] g_FPGA_FIFO_SPACE 43, fifo_space{654}
[ 49.563650] ret_nonce_num = 17, snd_to_fpga_work{3326}
[ 49.569022] total ret nonce num = 16, diff1_nonce num = 1024
[ 49.574931] gDiff_nonce_num{0}gNonce_Err{1}
[ 49.579310] gSubmit_nonce_num{0}
[ 49.582690] chain0 asic01 ret nonce_num{0}
[ 49.586973] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 49.592437] dev->temp_out_ctrl{1}
[ 49.592437]
[ 49.597452] fifo_state 0 temp_state 0 fan_state 0
[ 51.468741] temp_highest{30}
[ 51.471819] Customized fan speed {160}
[ 51.475753] pwm_percent{100}
[ 55.906155] temp_highest{32}
[ 55.909208] Customized fan speed {160}
[ 55.913132] pwm_percent{100}
[ 59.281255] temp_highest{34}
[ 59.284301] Customized fan speed {160}
[ 59.288224] pwm_percent{100}
[ 59.528970] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 59.528970] error_fan 5, normal_fan 1, fan_num 1
[ 59.551445]
[ 59.551445] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 59.560725] g_FPGA_FIFO_SPACE 44, fifo_space{531}
[ 59.565639] ret_nonce_num = 51, snd_to_fpga_work{9865}
[ 59.571012] total ret nonce num = 50, diff1_nonce num = 3200
[ 59.576926] gDiff_nonce_num{0}gNonce_Err{1}
[ 59.581300] gSubmit_nonce_num{0}
[ 59.584674] chain0 asic02 ret nonce_num{0}
[ 59.588959] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 59.594425] dev->temp_out_ctrl{1}
[ 59.594425]
[ 59.599438] fifo_state 0 temp_state 0 fan_state 0
[ 64.158203] temp_highest{36}
[ 64.161255] Customized fan speed {160}
[ 64.165178] pwm_percent{100}
[ 69.530921] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 69.530921] error_fan 5, normal_fan 1, fan_num 1
[ 69.553418]
[ 69.553418] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 69.562685] g_FPGA_FIFO_SPACE 43, fifo_space{490}
[ 69.567612] ret_nonce_num = 75, snd_to_fpga_work{16405}
[ 69.573066] total ret nonce num = 74, diff1_nonce num = 4736
[ 69.578984] gDiff_nonce_num{0}gNonce_Err{1}
[ 69.583359] gSubmit_nonce_num{0}
[ 69.586736] chain0 asic03 ret nonce_num{0}
[ 69.591019] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 69.596496] dev->temp_out_ctrl{1}
[ 69.596496]
[ 69.601505] fifo_state 0 temp_state 0 fan_state 0
[ 70.910239] temp_highest{38}
[ 70.913279] Customized fan speed {160}
[ 70.917210] pwm_percent{100}
[ 78.160228] temp_highest{40}
[ 78.163278] Customized fan speed {160}
[ 78.167200] pwm_percent{100}
[ 79.532860] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 79.532860] error_fan 5, normal_fan 1, fan_num 1
[ 79.555582]
[ 79.555582] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 79.564856] g_FPGA_FIFO_SPACE 43, fifo_space{449}
[ 79.569773] ret_nonce_num = 92, snd_to_fpga_work{22944}
[ 79.575238] total ret nonce num = 91, diff1_nonce num = 5824
[ 79.581159] gDiff_nonce_num{0}gNonce_Err{1}
[ 79.585533] gSubmit_nonce_num{0}
[ 79.588906] chain0 asic04 ret nonce_num{0}
[ 79.593199] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 79.598676] dev->temp_out_ctrl{1}
[ 79.598676]
[ 79.603700] fifo_state 0 temp_state 0 fan_state 0
[ 84.909788] ch1-as29: dev->task_buffer_wr{0x00001efd}rd{0x0000235b}ret work_id{0xa2c3} don't match task_buffer_match{0x22c3}
[ 84.921622] chain1 - HW2
[ 89.534820] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 89.534820] error_fan 5, normal_fan 1, fan_num 1
[ 89.557289]
[ 89.557289] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 89.566552] g_FPGA_FIFO_SPACE 44, fifo_space{408}
[ 89.571471] ret_nonce_num = 114, snd_to_fpga_work{29483}
[ 89.577026] total ret nonce num = 112, diff1_nonce num = 7168
[ 89.583025] gDiff_nonce_num{0}gNonce_Err{2}
[ 89.587397] gSubmit_nonce_num{0}
[ 89.590775] chain0 asic05 ret nonce_num{0}
[ 89.595058] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 89.600521] dev->temp_out_ctrl{1}
[ 89.600521]
[ 89.605531] fifo_state 0 temp_state 0 fan_state 0
[ 89.913993] temp_highest{42}
[ 89.917029] Customized fan speed {160}
[ 89.920951] pwm_percent{100}
[ 99.536755] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 99.536755] error_fan 5, normal_fan 1, fan_num 1
[ 99.559231]
[ 99.559231] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 99.568492] g_FPGA_FIFO_SPACE 44, fifo_space{368}
[ 99.573405] ret_nonce_num = 133, snd_to_fpga_work{36023}
[ 99.578954] total ret nonce num = 131, diff1_nonce num = 8384
[ 99.584957] gDiff_nonce_num{0}gNonce_Err{2}
[ 99.589324] gSubmit_nonce_num{0}
[ 99.592700] chain0 asic06 ret nonce_num{0}
[ 99.596978] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 99.602446] dev->temp_out_ctrl{1}
[ 99.602446]
[ 99.607457] fifo_state 0 temp_state 0 fan_state 0
[ 109.538703] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 109.538703] error_fan 5, normal_fan 1, fan_num 1
[ 109.561189]
[ 109.561189] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 109.570518] g_FPGA_FIFO_SPACE 42, fifo_space{328}
[ 109.575437] ret_nonce_num = 152, snd_to_fpga_work{42563}
[ 109.580988] total ret nonce num = 150, diff1_nonce num = 9600
[ 109.586994] gDiff_nonce_num{0}gNonce_Err{2}
[ 109.591373] gSubmit_nonce_num{0}
[ 109.594746] chain0 asic07 ret nonce_num{0}
[ 109.599030] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 109.604501] dev->temp_out_ctrl{1}
[ 109.604501]
[ 109.609514] fifo_state 0 temp_state 0 fan_state 0
[ 112.667982] temp_highest{44}
[ 112.671029] Customized fan speed {160}
[ 112.674952] pwm_percent{100}
[ 113.199772] Change diff to 13
[ 113.202916] diff fix to 6
[ 119.540664] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 119.540664] error_fan 5, normal_fan 1, fan_num 1
[ 119.563144]
[ 119.563144] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 119.572418] g_FPGA_FIFO_SPACE 44, fifo_space{244}
[ 119.577337] ret_nonce_num = 176, snd_to_fpga_work{49101}
[ 119.582887] total ret nonce num = 174, diff1_nonce num = 11136
[ 119.588982] gDiff_nonce_num{0}gNonce_Err{2}
[ 119.593354] gSubmit_nonce_num{0}
[ 119.596738] chain0 asic08 ret nonce_num{0}
[ 119.601021] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 119.606496] dev->temp_out_ctrl{1}
[ 119.606496]
[ 119.611500] fifo_state 0 temp_state 0 fan_state 0
[ 129.480101] jiffies{-87307}dev->cgminer_start_time{-133397}time_elasp_ms =90019ms dev->total_nonce_num{194}
[ 129.490327] bgNonce_average{1}
[ 129.493525] chain0 Chain_nonce_nu[2] Chain_nonce_nu_last[0]
[ 129.499352] bgNonce_average{1}
[ 129.502545] chain1 Chain_nonce_nu[196] Chain_nonce_nu_last[0]
[ 129.542538] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 129.542538] error_fan 5, normal_fan 1, fan_num 1
[ 129.565000]
[ 129.565000] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 129.574264] g_FPGA_FIFO_SPACE 25, fifo_space{223}
[ 129.579184] ret_nonce_num = 196, snd_to_fpga_work{55660}
[ 129.584745] total ret nonce num = 194, diff1_nonce num = 12416
[ 129.590846] gDiff_nonce_num{0}gNonce_Err{2}
[ 129.595216] gSubmit_nonce_num{0}
[ 129.598594] chain0 asic09 ret nonce_num{0}
[ 129.602873] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 129.608342] dev->temp_out_ctrl{1}
[ 129.608342]
[ 129.613359] fifo_state 0 temp_state 0 fan_state 0
[ 139.544546] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 139.544546] error_fan 5, normal_fan 1, fan_num 1
[ 139.567038]
[ 139.567038] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 139.576304] g_FPGA_FIFO_SPACE 42, fifo_space{205}
[ 139.581228] ret_nonce_num = 212, snd_to_fpga_work{62181}
[ 139.586785] total ret nonce num = 210, diff1_nonce num = 13440
[ 139.592880] gDiff_nonce_num{0}gNonce_Err{2}
[ 139.597258] gSubmit_nonce_num{0}
[ 139.600632] chain0 asic10 ret nonce_num{0}
[ 139.604915] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 139.610385] dev->temp_out_ctrl{1}
[ 139.610385]
[ 139.615401] fifo_state 0 temp_state 0 fan_state 0
[ 144.260894] Change diff to 12
[ 144.264039] diff fix to 6
[ 149.546549] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 149.546549] error_fan 5, normal_fan 1, fan_num 1
[ 149.569009]
[ 149.569009] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 149.578276] g_FPGA_FIFO_SPACE 44, fifo_space{162}
[ 149.583188] ret_nonce_num = 234, snd_to_fpga_work{68719}
[ 149.588746] total ret nonce num = 232, diff1_nonce num = 14848
[ 149.594839] gDiff_nonce_num{0}gNonce_Err{2}
[ 149.599210] gSubmit_nonce_num{0}
[ 149.602588] chain0 asic11 ret nonce_num{0}
[ 149.606870] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 149.612341] dev->temp_out_ctrl{1}
[ 149.612341]
[ 149.617354] fifo_state 0 temp_state 0 fan_state 0
[ 154.361440] match diff 12 hash2_32[6]{0x000ceaba}
[ 159.548460] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 159.548460] error_fan 5, normal_fan 1, fan_num 1
[ 159.570943]
[ 159.570943] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 159.580224] g_FPGA_FIFO_SPACE 44, fifo_space{122}
[ 159.585139] ret_nonce_num = 255, snd_to_fpga_work{75259}
[ 159.590687] total ret nonce num = 253, diff1_nonce num = 16192
[ 159.596773] gDiff_nonce_num{1}gNonce_Err{2}
[ 159.601145] gSubmit_nonce_num{1}
[ 159.604519] chain0 asic12 ret nonce_num{0}
[ 159.608800] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 159.614268] dev->temp_out_ctrl{1}
[ 159.614268]
[ 159.619279] fifo_state 0 temp_state 0 fan_state 0
[ 169.550424] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 169.550424] error_fan 5, normal_fan 1, fan_num 1
[ 169.572906]
[ 169.572906] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 169.582172] g_FPGA_FIFO_SPACE 43, fifo_space{288}
[ 169.587087] ret_nonce_num = 284, snd_to_fpga_work{81799}
[ 169.592636] total ret nonce num = 282, diff1_nonce num = 18048
[ 169.598733] gDiff_nonce_num{1}gNonce_Err{2}
[ 169.603110] gSubmit_nonce_num{1}
[ 169.606484] chain0 asic13 ret nonce_num{0}
[ 169.610772] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 169.616250] dev->temp_out_ctrl{1}
[ 169.616250]
[ 169.621272] fifo_state 0 temp_state 0 fan_state 0
[ 175.468177] Change diff to 11
[ 175.471309] diff fix to 6
[ 178.802341] match diff 11 hash2_32[6]{0x000bd8d9}
[ 179.552385] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 179.552385] error_fan 5, normal_fan 1, fan_num 1
[ 179.574862]
[ 179.574862] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 179.584127] g_FPGA_FIFO_SPACE 44, fifo_space{266}
[ 179.589044] ret_nonce_num = 313, snd_to_fpga_work{88337}
[ 179.594595] total ret nonce num = 311, diff1_nonce num = 19904
[ 179.600683] gDiff_nonce_num{2}gNonce_Err{2}
[ 179.605051] gSubmit_nonce_num{2}
[ 179.608424] chain0 asic14 ret nonce_num{0}
[ 179.612707] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 179.618178] dev->temp_out_ctrl{1}
[ 179.618178]
[ 179.623200] fifo_state 0 temp_state 0 fan_state 0
[ 189.554352] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 189.554352] error_fan 5, normal_fan 1, fan_num 1
[ 189.576967]
[ 189.576967] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 189.586228] g_FPGA_FIFO_SPACE 44, fifo_space{654}
[ 189.591143] ret_nonce_num = 329, snd_to_fpga_work{94877}
[ 189.596692] total ret nonce num = 327, diff1_nonce num = 20928
[ 189.602788] gDiff_nonce_num{2}gNonce_Err{2}
[ 189.607156] gSubmit_nonce_num{2}
[ 189.610533] chain0 asic15 ret nonce_num{0}
[ 189.614810] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 189.620284] dev->temp_out_ctrl{1}
[ 189.620284]
[ 189.625292] fifo_state 0 temp_state 0 fan_state 0
[ 199.556266] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100
[ 199.556266] error_fan 5, normal_fan 1, fan_num 1
[ 199.578739]
[ 199.578739] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 199.588016] g_FPGA_FIFO_SPACE 43, fifo_space{572}
[ 199.592931] ret_nonce_num = 349, snd_to_fpga_work{101417}
[ 199.598571] total ret nonce num = 347, diff1_nonce num = 22208
[ 199.604658] gDiff_nonce_num{2}gNonce_Err{2}
[ 199.609034] gSubmit_nonce_num{2}
[ 199.612409] chain0 asic16 ret nonce_num{1}
[ 199.616696] dev->net_diff_sh_bit{42}dev->get_blk_num{0}
[ 199.622169] dev->temp_out_ctrl{1}
(Moderator's note: This post was edited by frodocooper to add code tags to the log and to remove inline image tags.) |
|
|
|
|
I am way out your league and my budget. Thanks for your time though
|
|
|
|
|
I am based in UK/Ireland. Can you please let me know the price with S7 + PSU?
|
|
|
|
|
Where you based? EU or USA or Other? What's the price?
|
|
|
|
|
Hi All,
I am new to mining. I got new 2pac gekkoscience USB miner. I am using cgminer software. I am pointed to kano pool and running for 20 hours or so with for past two days . This is purely hobby.
My cgminer says…
5s:13.21G 1m:15.72G 5m:15.58G 15m:15.85G avg:16.04Gh/s
A:68068 R:0 HW:0 WU:224.1/m
Connected to stratum.kano.is diff 442 with stratum as user tinygekkoscienceminer.worker1
Block: 2f5748f1... Diff:1.93T Started: [13:04:55.952] Best share: 40.6K
--------------------------------------------------------------------------------
USB management Pool management Settings Display options Quit
0: BSD 10014346: COMPAC-2 150.00MHz HW:0 | 13.35G / 16.04Gh/s WU:224.1/m
[2018-01-05 13:04:55.952] Stratum from pool 0 detected new block at height 502693
[2018-01-05 13:05:56.876] Accepted 179ba6b3 Diff 2.78K/442 BSD 0
[2018-01-05 13:10:12.572] Accepted 21c9935e Diff 1.94K/442 BSD 0
In my worker in kano pool web site work says …
Work Diff: 442
Last Share: 11s
Shares: 601
Diff: 265,642
:Share Rate: 18.37GHs
<<Elapsed: 10m 20s
:Invalid: 3.149 %
Stale: 442/1
Dup: 0/0
Hi 8196/2
Rej 0/0
Block %: 0.000%
Hash Rate: 19.10GHs
What are above parameters means, when i can pay out (years)?
|
|
|
|
|
