Latest posts of: stevr59

i have a question about solo mining my main pc has about 150 hash so if i want more hash do i add more pcs? my second pc has about 38 hash so if i added this to the network does this up my hash rate to 183 hash or is each pc counted separate total all 6 pc i can add about 400 hash a wile back i ran solo for a few days and got 69 coins but have not gotten a coin since but only ran my main pc solo wile i pool mine with the rest

wallet says i have 248.30133939 XMG
cryptoid 220.82357058 XMG
when i check the id for the 23 coins i get not yet redeeemed

u have coins in a change address u dont see that coins on explorer if u check ur main address
but they are still in ur wallet

enable coin control and search for change addresses

dint worry your coins are showing in your wallet and if you have right blockchain loaded in your wallet nothing to get scare, my wallet has 213 XMG and chainz.cryptoid.info shows only 30 xmg stll its ok, since it is not knowing one of my addresses which generated or recieved those coins.

--------------------------------------------------------------------------------------------------------------
magi rigs for rent with very low one time payments. hashes upto 150khps and duration upto 1 year.
https://bitcointalk.org/index.php?topic=3907169.0

not worried now i send them to my other wallet and there now. now if i can get the 7000 coins i made when the network was all messed up i be very happy . but i take it i just mined air but oh well i was happy for a few mins lol

Quote from: cryptonit on May 22, 2018, 11:42:46 PM

Quote from: stevr59 on May 22, 2018, 09:33:42 PM

wallet says i have 248.30133939 XMG
cryptoid 220.82357058 XMG
when i check the id for the 23 coins i get not yet redeeemed

u have coins in a change address u dont see that coins on explorer if u check ur main address
but they are still in ur wallet

enable coin control and search for change addresses

thanks that worked

hey guys i got a questions i finally got solo mining working and i did very well as i mined 23 coins in a few hours the amount shows in my wallet that they are spendable but when i check my wallet addy on cryptoid it shows i never received the coins. from what i can tell every thing i mine solo mining i never get am i missing some thing here? wallet is updated as well as the new block chain
Status: 4150 confirmations
Date: 5/18/18 23:13
Source: Generated
Credit: 23.36949673 XMG
Net amount: +23.36949673 XMG
Transaction ID: b32e3655246a63b815ee9ba47fada047745dcd7e656f38c81e09501f3b1e6338

wallet says i have 248.30133939 XMG
cryptoid 220.82357058 XMG
when i check the id for the 23 coins i get not yet redeeemed

Quote from: Derko on May 18, 2018, 02:24:34 PM

Quote from: stevr59 on May 18, 2018, 02:11:24 PM

Quote from: Derko on May 18, 2018, 01:42:05 PM

Quote from: stevr59 on May 18, 2018, 01:39:26 PM

when i try to solo mine using one wallet on anouter computer i get this from the other computer 2018-05-18 08:38:22] HTTP request failed: Failed to connect to 127.0.0.1 port 8232: Connection refused i have tried with different setting and can only solo mine on each computer with the wallet running for that computer. i wan to only use one wallet on my main computer not sure what i am doing wrong.

127.0.0.1 is local ip and can NOT be accessed via LAN!

change
from "listen=0" to "listen=1"
in magi.conf and restart the GUI. This will force it to listen on ALL IPs in your PC.

i changed the config as you said restarted the wallet and now i gt this when i run my miner on the windows pc
[2018-05-18 09:15:15] HTTP request failed: Recv failure: Connection was reset

[2018-05-18 09:15:15] json_rpc_call failed, retry after 30 seconds

[2018-05-18 09:15:45] HTTP request failed: The requested URL returned error: 403 Forbidden

[2018-05-18 09:15:45] json_rpc_call failed, retry after 30 seconds

After
rpcallowip=127.0.0.1
add
rpcallowip=?.?.?.?
where ?.?.?.? is the ip you wish to allow/give acces to the daemon; you can use wilcard like ?.?.?.* to allow network (not ip)

thanks that worked

Quote from: Derko on May 18, 2018, 01:42:05 PM

Quote from: stevr59 on May 18, 2018, 01:39:26 PM

127.0.0.1 is local ip and can NOT be accessed via LAN!

change
from "listen=0" to "listen=1"
in magi.conf and restart the GUI. This will force it to listen on ALL IPs in your PC.

when i try to solo mine using one wallet on my main computer i get this from the other computer 2018-05-18 08:38:22] HTTP request failed: Failed to connect to 127.0.0.1 port 8232: Connection refused i have tried with different setting and can only solo mine on each computer with the wallet running for that computer. i wan to only use one wallet on my main computer not sure what i am doing wrong.
hers a copy of my config file
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=myusername
rpcpassword=x
# Listen for RPC connections on this TCP port:
rpcport=8232
# server=1 to accept JSON-RPC commands
server=1
# listen=1 to accept connections from outside
listen=0
# RPC connection from localhost allowed
rpcallowip=127.0.0.1
allowip=192.168.1.117
allowip=192.168.1.118
allowIP=10.0.0.*
# Add nodes to connect to specific peers
addnode=104.128.225.215

# posii=1 to enable PoS staking; default = 0
posii=1
staking=1
# Transaction under stake with a value greater than the threshold is being splitted
stakesplitthreshold=259
# Transactions with values less than the threshold will combine into one
stakecombinethreshold=100

Quote from: stevr59 on May 13, 2018, 12:44:15 PM

Quote from: jonathin.r on May 13, 2018, 06:00:59 AM

Compiling cpuminer-opt on Ubuntu 18.04

Please, do not directly quote this message!

Step 1: Installing Dependencies

To compile and run cpuminer-opt, your system will need to download a few programs. These are mission-critical for a successful compile. The following command will download and automatically install the programs necessary:

sudo apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake zlib1g-dev

Some of these programs will require that your system be updated to the latest LTS release of Ubuntu. Some versions of the programs necessary for cpuminer-opt to run are not contained in the repositories of older Ubuntu releases. You should update your system to Ubuntu 18.04 LTS if you haven't already.

Step 2: Downloading the Source Code

Execute the command below to download Version 3.8.8.1 of the program to your working directory, extract it, then change into the newly extracted folder: (execute each of these lines, one at a time)

wget https://github.com/JayDDee/cpuminer-opt/archive/v3.8.8.1.tar.gz

tar xvzf v3.8.8.1.tar.gz

cd ./cpuminer-opt-3.8.8.1

Step 3: Compiling the Program

Execute the command below to compile the program: (Again, execute each of these lines, one at a time):

./autogen.sh

CFLAGS=”-03 -march=native -Wall” ./configure –with-curl

make

If you plan on installing this to your system, make sure to change “make” to “sudo make install”, and if you encounter any issues, I'll try to remain open here to answer them to the best of my abilities. Hope this helped some!

well thats was to easy it was all ready compile in the arch aur repos got it installl but didnt see any info on the commadns to fire it up so i did this
( /usr/bin/cpuminer -a m7m -o http://127.0.0.1:8232 -u myusername -p x ) it works i am solo mining now on all 16 treads instead of the 8 the other gui miner was doing. not sure all the commands or best way to run it but yeah it works thanks... UPDATE... found out i dont need the /usr/bin to run it now i made a start up script ( cpuminer -a m7m -o http://127.0.0.1:8232 -u myusername -p x )

sad news i let my machine run wile i went to see my mom came back and system crashed i just made 40 magi coins solo mining and rebooted the machine and the os is toast. well have to reinstall. i was able to get to my magi coin file and save it so what do i need to do to get my wallet back? do i just need to replace new wallet.dat file with my saved wallet.dat file?

Quote from: jonathin.r on May 13, 2018, 06:00:59 AM

Compiling cpuminer-opt on Ubuntu 18.04

Please, do not directly quote this message!

Step 1: Installing Dependencies

sudo apt-get install build-essential libssl-dev libcurl4-openssl-dev libjansson-dev libgmp-dev automake zlib1g-dev

Step 2: Downloading the Source Code

Execute the command below to download Version 3.8.8.1 of the program to your working directory, extract it, then change into the newly extracted folder: (execute each of these lines, one at a time)

wget https://github.com/JayDDee/cpuminer-opt/archive/v3.8.8.1.tar.gz

tar xvzf v3.8.8.1.tar.gz

cd ./cpuminer-opt-3.8.8.1

Step 3: Compiling the Program

Execute the command below to compile the program: (Again, execute each of these lines, one at a time):

./autogen.sh

CFLAGS=”-03 -march=native -Wall” ./configure –with-curl

make

Quote from: jonathin.r on May 13, 2018, 02:11:04 AM

Quote from: stevr59 on May 12, 2018, 09:57:45 PM

update i fianly got solo mineing working on the windows machin amd my main linux machine only way it work is runing GUI m-cpuminer-qt... m-minerd well not work for solo mining. all ready made 1.92 magi in 4 hours

If you really want to go down the path of solo mining, I'd recommend cpuminer-opt if your Dell Server (if that's what it really is) supports at least SSE2, AVX and AES on it's cpu(s). You can easily determine this with sudo lshw -class CPU.

it a older dell t-5500 its a workstation-server here the out-put from the commands
[steve@Dell-Server ~]$ sudo lshw -class CPU
*-cpu:0
description: CPU
product: Intel(R) Xeon(R) CPU X5570 @ 2.93GHz
vendor: Intel Corp.
physical id: 400
bus info: cpu@0
slot: CPU1
size: 2933MHz
capacity: 3800MHz
width: 64 bits
clock: 2105MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm tpr_shadow vnmi flexpriority ept vpid dtherm ida
configuration: cores=4 enabledcores=4 threads=2
*-cpu:1
description: CPU
product: Intel(R) Xeon(R) CPU X5570 @ 2.93GHz
vendor: Intel Corp.
physical id: 401
bus info: cpu@1
slot: CPU2
size: 2933MHz
capacity: 3800MHz
width: 64 bits
clock: 2105MHz
capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 popcnt lahf_lm tpr_shadow vnmi flexpriority ept vpid dtherm ida
configuration: cores=4 enabledcores=4 threads=2

Quote from: stevr59 on May 12, 2018, 03:22:52 AM

Quote from: s0litaire on May 12, 2018, 01:33:06 AM

Quote from: stevr59 on May 12, 2018, 12:53:59 AM

any one know why i cant solo mine? i got it working on my windows machine but my linux desk top it well not work no matter what setting i use i got the firewall set fot port 3232 got it port forwards and all i get is
[steve@Dell-Server cpuminer]$ ./minerd --url http://127.0.0.1:8232 --user myusername --pass mypass
[2018-05-11 19:50:59] Binding thread 0 to cpu 0
[2018-05-11 19:50:59] Binding thread 2 to cpu 2
[2018-05-11 19:50:59] Binding thread 3 to cpu 3
[2018-05-11 19:50:59] Binding thread 4 to cpu 4
[2018-05-11 19:50:59] Binding thread 5 to cpu 5
[2018-05-11 19:50:59] Binding thread 8 to cpu 8
[2018-05-11 19:50:59] 16 miner threads started, using 'm7mhash' algorithm.
[2018-05-11 19:50:59] Binding thread 1 to cpu 1
[2018-05-11 19:50:59] Binding thread 10 to cpu 10
[2018-05-11 19:50:59] Binding thread 11 to cpu 11
[2018-05-11 19:50:59] Binding thread 12 to cpu 12
[2018-05-11 19:50:59] Binding thread 6 to cpu 6
[2018-05-11 19:50:59] Binding thread 7 to cpu 7
[2018-05-11 19:50:59] Binding thread 9 to cpu 9
[2018-05-11 19:50:59] Binding thread 14 to cpu 14
[2018-05-11 19:50:59] Binding thread 15 to cpu 15
[2018-05-11 19:50:59] Binding thread 13 to cpu 13
not sure what else i am doing wroung got my wallet sync and running and this is all i get
oh heres my conf and i an running linux manjaro 17.05
You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=myusername
rpcpassword=mypass
# Listen for RPC connections on this TCP port:
rpcport=8232
# server=1 to accept JSON-RPC commands
server=1
# listen=1 to accept connections from outside
listen=1
# RPC connection from localhost allowed
rpcallowip=127.0.0.1
# Add nodes to connect to specific peers
addnode=104.128.225.215
addnode=45.35.251.73
# posii=1 to enable PoS staking; default = 0
posii=1
staking=1
# Transaction under stake with a value greater than the threshold is being splitted
stakesplitthreshold=259
# Transactions with values less than the threshold will combine into one
stakecombinethreshold=100

I think minerd has a debug option Try running :

./minerd -D --url http://127.0.0.1:8232 --user myusername --pass mypass

the -D should put out more info to see if their is an issue

that didnt work got the same out put as above

Quote from: s0litaire on May 12, 2018, 01:33:06 AM

Quote from: stevr59 on May 12, 2018, 12:53:59 AM

I think minerd has a debug option Try running :

./minerd -D --url http://127.0.0.1:8232 --user myusername --pass mypass

the -D should put out more info to see if their is an issue

that didnt work got the same out put as above

Quote from: Vitalik_Pedik on May 11, 2018, 03:27:10 PM

Quote from: stevr59 on May 11, 2018, 02:59:31 PM

Quote from: Vitalik_Pedik on May 11, 2018, 04:43:52 AM

Quote from: magiboi on May 11, 2018, 04:34:11 AM

Quote from: Vitalik_Pedik on May 11, 2018, 04:21:53 AM

Quote from: magiboi on May 11, 2018, 03:56:35 AM

my wallet not syncing
which wallet is official?
pool is making paying out
but to which chain?
which chain is primary?

https://poolinfo.systms.org/ primary

should i update my wallet? or just wait out the fork?

replace chain with this and resync:

Quote from: joelao95 on May 06, 2018, 03:00:40 AM

Blockchain snapshot as follows:

https://m-core.org/bin/block-chain/m-block-chain-1813042.zip
https://m-core.org/bin/block-chain/m-block-chain-1813042.tar.gz

well i just did thats and lost most of my coins i had 215.06035522 XMG now i only have 49.84823902 XMG most of wich i paid for at the exchane. thanks

do repair wallet procedure

thanks thats worked i got my coins back

Quote from: Vitalik_Pedik on May 11, 2018, 04:43:52 AM

Quote from: magiboi on May 11, 2018, 04:34:11 AM

Quote from: Vitalik_Pedik on May 11, 2018, 04:21:53 AM

Quote from: magiboi on May 11, 2018, 03:56:35 AM

my wallet not syncing
which wallet is official?
pool is making paying out
but to which chain?
which chain is primary?

https://poolinfo.systms.org/ primary

should i update my wallet? or just wait out the fork?

replace chain with this and resync:

Quote from: joelao95 on May 06, 2018, 03:00:40 AM

Blockchain snapshot as follows:

https://m-core.org/bin/block-chain/m-block-chain-1813042.zip
https://m-core.org/bin/block-chain/m-block-chain-1813042.tar.gz

well i just did thats and lost most of my coins i had 215.06035522 XMG now i only have 49.84823902 XMG most of wich i paid for at the exchane. thanks

my wallet still has not sync in 5 days. can i fix this ir do i waite for the new wallet. i got as lot of coins thats have not been delived to my wallet . last block confired was 1813468

Quote from: Jeremy450 on April 27, 2018, 04:50:22 PM

Quote from: davey81 on April 27, 2018, 04:28:24 PM

Quote from: Jeremy450 on April 27, 2018, 07:15:13 AM

Quote from: davey81 on April 27, 2018, 07:02:21 AM

true since max kh/s is only 60 and i have no idea how to make a cpu rig just for it and the only way i see to do that is a huge raspberry pi cluster. And thank you for replying.

A Cluster of Raspberry pi's should give you a reasonable hashrate. Depending how many you have in your cluster. but depending how much you pay for a pi. Here by the time i buy 4 pi's here in Australia i can do a cheap computer with a reasonable cpu and get more then a cluster can.

give you an idea i have a AM4 AMD A8-9600 (Quad Core) (APU) using 3 threads at 100% i get 40 - 65khs from it (not overclocked) if i used 4 threads i would get 55 - 70khs max
I have another AMD AM4 Ryzen 5 1500x (4 core) using all 8 threads at 100% i get 80 - 140khs from it (overclocked too)
I have another AMD AM4 Ryzen 7 1700 (6 core) using all 12 threads at 100% i get 115 - 180khs from it (not overclocked)
both are not over clocked either

thats cool i got a am+3 fx 6300 6 core, thank you for the info. what type of miner are you using im using m-cpuminer-qt and only get 8 threads max

Thats a good one thats a little higher then the one i have. Mine is a fx 6100 6core. i try to use to use m-minerd (Commandline version) as much as i can for the ease of automation for cold starts/reboots. i got it running on a 21 core VPS i run for my business. and got it using 16 threads. if you need help with the batch file let me know.
http://www.coinmagi.org/files/m-cpuminer/m-cpuminer-qt-64-win.zip
http://www.coinmagi.org/files/m-cpuminer/m-cpuminer-qt-32-win.zip

i've only used sweetspot once
http://www.coinmagi.org/files/m-cpuminer/NeedIfFindIt-Sweet-Spot/

with my 6100 i get 40 - 65khs, its alittle overclocked but not by much.

as the fx series doesnt use multiple threads per core you'll best be able to use use 6 threads.
if your unsure go to task manager and click on more details if using windows 10
then go to performance. and then right click on the cpu graph on the right and go to change graphs and select logical processes
this will tell you how many threads your cpu has and thats the best max you can use. if you go over that amount you will reduce your hashrate.
going 1 thread lower sometimes gives you better results. it will all depends on heatsink and its heat dissipation.

i have a old Xeon 8 Core 3.06Ghz wich get me about 50 to 70 khs and 2 raspberry pi one pi hash rate is like 7 the other is 3.29 kh the weird part is one min i am getting 350 khs out of the xeon and then it drop back to 50 or so the pi well some time jumpo up to 50 kh why i dont know not sure if it from the russian guy playing with the net work i have never seen my kh jump up like this before, and my pool shows i made 7 magi coins sicne the hack started but i olny got 2 the rest where orpaned

Quote from: Vitalik_Pedik on April 25, 2018, 06:25:42 AM

Quote from: 111magic on April 25, 2018, 06:13:36 AM

Quote from: Vitalik_Pedik on April 25, 2018, 05:42:15 AM

Quote from: earl3000 on April 25, 2018, 04:19:54 AM

could you, for common future good, not make a pull request on github with a fix, post an issue with the error on github, or atleast point to area where the bug is?

I can't do this
First reason, I am realy don't know how to proper fix this. Have some ideas and all.
Main reason is money. I spend many time to be able to attack, now returning my time-investments with profit.

Don't understand your posts here. Are you giving the community a confirmation you are attacking Magi & abuse the open-source for own profit?

Not abuse, but help to improve security with own profit. I do nothing bad for net, just increase POW rewards for miners.
As I say before, simple bug reports not working wit Joe.

how is this helping us. i just made 2 magi coins wich was just opransed so far i have lost 4 ,magi coins since this stared. so yeah it helping me get rid of ,my coins.

Quote from: tazzz013 on January 07, 2018, 04:20:12 PM

Everything I show in my account for transactions in Suprnova is "Unconfirmed"

same here evry thing i mined since the hf are now unconfirmed on Suprnova and bull miner have not made any thing a=since hf so i am shutting my miners down.

Quote from: jiyef002 on January 06, 2018, 07:21:39 PM

That was fast! Thanks!!!

Quote from: joelao95 on January 06, 2018, 07:20:51 PM

I've updated 1.4.5.3 release.

i updated both my linux and windows pc with v1.4.5.3 and all works well even pos is now working thanks for ur hard work.