 Show Posts
|
|
Pages: [1]
|
The miner can detect various errors and reboot the PC if needed, but low hashrate is not an error obviously.
Well if it could shutdown right after such error it would be great, now it just restarts with low hashrate after every single error like this: ERROR: Can't find nonce with device [ID=0, GPU #0], cuda exception in [StreamContext<struct search_results,struct Ethash::KernelLaunchTag>::synchronize, 51], hardware stack error |
|
|
|
|
Yeah, it turned that the problem for me was running windows 7. Updating to windows 10 fixed the problem. Now sometimes when driver fail, overclock settings from msi afterburner get reset, miner restart and start mining with default clocks.
Is there a way to make miner exit or set watchdog like in claymore to watch hashrate and if it drops below certain level - exit? CMD script will do restart thing afterwards.
|
|
|
|
|
Hi, I switch today to t-rex from Claymore's miner and getting 18-20 MH/s instead of 35MH/s on 1070ti no matter the setting, set highest intensity and CPU priority and no result.
Tried running benchmark with 383 epoch with which Claymore was still functioning, gettin better 27MH/s, but still not nearly good.
|
|
|
|
|
Shitshow, Miner finally died on a Christmas morning...
Switch to trex and getting 18-20 MH/s instead of 35MH/s on 1070ti no matter the setting. What the hell?
|
|
|
|
|
"-powlim -40" option is not working in Win7 x64 on 1070ti at all. Absolutely no reaction to any values on this parameter in GPU-Z.
|
|
|
|
Just to share, did some overclocking today on my 2700x. 4.4GHz@1.45V (60C, 19C ambient) - 780 H/s cryptonight v7. Mining does not load this CPU so much, so it is kept barely hot at this settings. |
|
|
|
2700X - 710-715 H/s CN v7 out of the box with wraith prism cooler on Asus Prime x470-Pro and bum memory sticks, 2133Mhz I think.  Want to put my old EK Supreme LT waterblock, but unable to find backplate for reasonable price with shipping.  Any defualt backplate from defective AM4 mobo would also do, I just down't want to modify original to preserve warranty. |
|
|
|
|
Have several questions about new "+" plans with additional fees. I am not a day trader and monthly fees do not interest me, since a may actively trade only 1 month in a year.
1) If you intend to implement monthly fees that means that withdraw fee will be lowered to current network fees? Last Sunday a made an on-chain transaction and it costed only 300 sat (~0.02eu), you are still charging 1% now. From 1btc it will cost 74eu at current rate, that is 3700x more then the current network fee. As I wrote earlier this is way to high.
2) What happens with current orders after no "+" plan active?
3) What happens with currently purchased bitcoins with no "+" plan?
4) How fast will "+" plan be activated if needed?
And lastly you currently have low 24h volume making huge spread possible, sometimes up to 200eu. Do you understand that additional fees to use bitcoin exchange will make things even worse?
|
|
|
|
Supported CryptoNight variations:
– Cryptonight
– Cryptonight V7
– Cryptonight Lite
– Cryptonight Lite V7
– Cryptonight Heavy
– Cryptonight UltraHeavy
SRBMiner Cryptonight AMD GPU Miner for All Your CryptoNight Needs
TeraScale supported? |
|
|
|
add
-pow7 1
on latest version of software. but your card is older than mine!
Unfortunately same 0 H/s Any other efficient miners for old AMD VGAs? XMRig gives only 90H/s, whereas Claymore's 9.7 Miner was outputting 220H/s and that was very good for such an old card. Claymore the owners of old cards bagging you, please add CryptoNightV7 support to 9.7 version. Your miner is simple the best for these GPUs. |
|
|
|
Any ideas hot to make latest version supporting today's hard fork to mine on Radeon HD 5870? Everything start fine, but 0 H/s is all what I get. AMD Cards available: 1
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 320, -dmem 0 (Memory used: 656MB)
Total cards: 1
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
XMR: Stratum - connecting to 'pool.supportxmr.com' <91.121.140.167> port 5555 (unsecure)
XMR: Stratum - Connected (pool.supportxmr.com:5555) (unsecure)
GPU0 t=29C fan=21%
GPU #0: Cypress (AMD Radeon HD 5800 Series), 1024 MB available, 20 compute units (pci bus 1:0:0)
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:00
XMR: GPU0 0 H/s
Incorrect XMR shares: none
1 minute average XMR total speed: 0 H/s
Pool switches: XMR - 0
Current XMR pool share target: 0x00068db8 (diff: 10000H)
GPU0 t=26C fan=21% |
|
|
|
|
Please add volume alerts on selected time frames.
|
|
|
|
|
Please lower the commission on withdrawing and depositing bitcoins. Recent bitcoin commissions lowered to 55 satoshi, and that is ~1USD. Kraken for example takes fixed 0,001BTC fee and takes no commission on trades until end of January. 1% and 0,01BTC is way to expensive taking in mind current bitcoin prices.
|
|
|
|
It warns you that this operation will be transmitted to the network. Pretty sure it asks "are you sure". You can unnecessary send to the wrong address if you're not careful.
I meant how do I find out when my next translation will go to new block with zero fee? Does the wallet status should turn to green or it is enough if it gets light green I can got with the next operation already? |
|
|
|
|
Hi guys. How can I identify if my current operation was executed and I can proceed to another to avoid unnecessary fees when there is not hurry?
|
|
|
|
|
Hi, Can you recommend any android app with customizable price alerts?
Unable to find your exchange on any of the apps.
|
|
|
|
|
