 Show Posts
|
|
Pages: [1] 2 3 »
|
Hi Martin,
Can you Check your Email Box please.
Can you Just Reply?
Samir
Dubai
|
|
|
|
Absolutely, I Agree with u  What about 7 coin, with: Every thing (all the farm), you will get it tomorrow a Dubai. Bestalg Nah - my offer of 5 coins stand. At current rates it would take me about 2 months to earn back again electricity included - and then maybe if i'm lucky a 2-3 coin profit. But with all the new 2TH devices shipping over the next few months - that is a huge risk to take. I earn more consistent coin from my 5 MH scrypt setup than I would do from the 800+ GH miner. (Last 30 days 2.09 btc - 30 days before that 2.25 btc - that is < 10% drop in revenue on same hardware over 60 days - where pure BTC mining drops about 50% pr month) - so financially it would make more sense just to spend the money on another 5 MH scrypt setup.... Hello Kaz911, Totally agree with u. If u are still interested to get it, It's yours, but i prefer to meet in sharjah or dubai only. In fact, i got a job offer in KSA, and i must go soon, and definitely i can't bring them with me. Let me know today please if it's possible. Thanks Bestalg |
|
|
|
Absolutely, I Agree with u What about 7 coin, with: Every thing (all the farm), you will get it tomorrow a Dubai. Bestalg |
|
|
|
I'll offer you 5 coins or equivalent in AED (Bitstamp/BTC-e rates) - offer valid until next difficulty jump. I have cash in hand and can pick it up in Abu Dhabi or Dubai today. |
|
|
|
most I could offer for the 8 bitburner furys would be 4 coins, and that would include shipping to the uk and escrow through sebastianju.
This price is based on antminers selling at 1.9 coins per 180GHs
Only
9 coin with shipping wodwide
interested? pm mesorry no offense for 8 coins I can get 720GHs (4 antminers) Best of luck with sale though. Thanks Same tou you  |
|
|
|
most I could offer for the 8 bitburner furys would be 4 coins, and that would include shipping to the uk and escrow through sebastianju.
This price is based on antminers selling at 1.9 coins per 180GHs
Only
9 coin with shipping worldwide
interested? pm me |
|
|
|
I didn't get it my self, but as per the specsheet they can get it with adjusting the power on a modified pic, Now if you are nt an expert, you can't even admit  . I don't have tools, and even the time, to play with, this is why, I want to sell. In default mode they are getting between 44 and 48, some times 52gh, depends On few factors such us the mining pool it self, so don't be angry, smile the life is nice... Bestalg  |
|
|
|
Here Full specs, and its up to 448 1) 8 Boards x BRAND NEW, Technobit HEX16B, Bitfury based ASIC Bitcoin miner. UP TO 448 GHProcessing Power: 42 GH/s Capable to run Overclocked (42-56GH/s) Power consumption: ~45W Included Heat Sink and Fan, cables. Included TPlink Preflashed Included Usb Hub 10port This board will connect via USB to a host controller like PC, Raspberry Pi, etc. capable of running cgminer. 2) 8 boards Tower BitBurner Fury from Asic Hardware. UP TO 480 GH and much more BitBurner Fury with external clock: 8 board tower Capable to run Overclocked (55-60GH/s) Fully assembled 8 Bitburner Fury boards (including 16 Bitfury ASIC chips/board) 8 attached heat sinks. Raspberry PI model B with SD card Usb Hub 7 port 2 Stacking cable for 2×4 boards Micro-USB Cable Mounting bolts Cooling fans &amp;amp;amp; mounting brackets 3) 4 board Hashbuster Micro Board . HashBuster Micro miner based on 9 bitfury chips. UP TO 104 GH 20+ Ghash/s standard speed. Up to 26 Ghash/s with OC. Can be connected directly to any PC via USB cable. Adjustable digital VRM for easy OC. Built in thermal sensor. Overheating protection. Thermally enhanced PCB. FAN connector. Adjustable fan speed via miner or automatic adjustment. Power bad LED indicator. RGB LED status indicator. Mounting holes for 80mm fan. Flat back side of PCB for easy heatsink installation. includes: Assembled miner PCB Usb Hub 11 port Power connector USB cable Due to the nature of crypto currencies, such as Bitcoin, there are no refunds or exchanges. BUT YOU HAVE MY ASSISTANCE |
|
|
|
|
I have a small farm ready to ship.
Mining actual 870gh/s
3 type of miner ready to mine over than 1Terra hash with overcloking.
1) 8 Boards x BRAND NEW, Technobit HEX16B, Bitfury based ASIC Bitcoin miner.
UP TO 360 GH and much more
2) 8 boards BitBurner Fury from Asic Hardware.
UP TO 480 GH and much more
3) 4 board Hashbuster Micro Board . HashBuster Micro miner based on 9 bitfury chips.
UP TO 104 GH
If some one interested pm me.
|
|
|
|
After the 3 day in town delivery UPS finally get you May I can try helping
...
So i tried your boards with hexmine in win7, tried all the combinations got 42gh with one board, 77ghs with two, 91gh with three, 101gh with foor
it's little wired why its slowing down when you add another device, it's suppose to be additional.
...
ThanksMy first thought from reading that is that your boards are being starved of power as you connect more. Have you tried running each one singularly to make sure they perform okay. Then try them together on different power sources (if you have two or more PSU's available), so you've got PSU one to board one, and PSU two to board two etc, and let us know the results. What settings are you using in Hexminer, can you post a screenshot? What is the make model of your power supply? It's probably got multiple low amp rails. I use 350w Enermax PSUs they have 2 power rails and 4x molex on 3 seperate wires and only cost <£30/$40 they run 4x Hex16B no problem. Hard to find any info on this PSU I could only find this graphic in the Google cache as originals seem to be deleted from their web site. If correct it may have only 28A x 12V = 336W on the 12v rail. But their web site says it's dual 12v rails so maybe it's 335W/2 = 168W max on a single rail/wire. That would explain why it's only powering 2x Hex16B. Never mix the ground between psu's never. Use one psu hub powers from it and as menu boards you can + tplink and forget
I think it will be enough for all, with 4 x 12v rails and 8 morlex and i will use 2 other molex from the other PSU.1chose a single rail psu with 60 amps at 12w rail something like 750-800 w Watch the 12 w rail Buy a tplink and if you can order the hub mentioned in my post from amazon.de if you are German I can send you the link later for the hub if you want I have 9 boards to 700 w psu with 20 days uptime + tplink when done right I am changing the software two often Throw away 5v tpli k adapter + hub 5v adapter also Thanks Loshia, I will let you know, tomorrow |
|
|
|
After the 3 day in town delivery UPS finally get you May I can try helping
...
So i tried your boards with hexmine in win7, tried all the combinations got 42gh with one board, 77ghs with two, 91gh with three, 101gh with foor
it's little wired why its slowing down when you add another device, it's suppose to be additional.
...
ThanksMy first thought from reading that is that your boards are being starved of power as you connect more. Have you tried running each one singularly to make sure they perform okay. Then try them together on different power sources (if you have two or more PSU's available), so you've got PSU one to board one, and PSU two to board two etc, and let us know the results. What settings are you using in Hexminer, can you post a screenshot? What is the make model of your power supply? It's probably got multiple low amp rails. I use 350w Enermax PSUs they have 2 power rails and 4x molex on 3 seperate wires and only cost <£30/$40 they run 4x Hex16B no problem. Hard to find any info on this PSU I could only find this graphic in the Google cache as originals seem to be deleted from their web site. If correct it may have only 28A x 12V = 336W on the 12v rail. But their web site says it's dual 12v rails so maybe it's 335W/2 = 168W max on a single rail/wire. That would explain why it's only powering 2x Hex16B. Never mix the ground between psu's never. Use one psu hub powers from it and as menu boards you can + tplink and forget
I think it will be enough for all, with 4 x 12v rails and 8 morlex and i will use 2 other molex from the other PSU. |
|
|
|
After the 3 day in town delivery UPS finally get you May I can try helping
...
So i tried your boards with hexmine in win7, tried all the combinations got 42gh with one board, 77ghs with two, 91gh with three, 101gh with foor
it's little wired why its slowing down when you add another device, it's suppose to be additional.
...
ThanksMy first thought from reading that is that your boards are being starved of power as you connect more. Have you tried running each one singularly to make sure they perform okay. Then try them together on different power sources (if you have two or more PSU's available), so you've got PSU one to board one, and PSU two to board two etc, and let us know the results. What settings are you using in Hexminer, can you post a screenshot? What is the make model of your power supply? It's probably got multiple low amp rails. I use 350w Enermax PSUs they have 2 power rails and 4x molex on 3 seperate wires and only cost <£30/$40 they run 4x Hex16B no problem. |
|
|
|
So i tried your boards with hexmine in win7, tried all the combinations got 42gh with one board, 77ghs with two, 91gh with three, 101gh with foor Do you have Hex16B or Hex16A2 (Hex16C)? This is the Hex16A2 (Hex16C) thread and 4x 24GH would be 96GH+ so 101 GH seems normal. If they are Hex16B don't run them all on the same length of wire because you will be using the same PSU rail.
you are welkome to help.
thanks |
|
|
|
|
