Up for sale is an authentic Steam Crave Aromamizer RDA V2. I picked up a spare glass for it, which was good because the original broke immediately. Asking price 0.055 BTC Free trackable shipping in USA. Outside USA Price + Actual Cost shipping.

I used this for a few days, and ended up not liking the tall profile (I like really small RDAs.) Comes with coils installed, spare set in the box.

It hits really well! I usually only do 40 or so watts, but on 50watts it is the most flavorful RDA that I have ever tried. It probably can host claptons and kick out massive clouds as well, but I really do enjoy this for the flavor. It brought out notes that my second favorite RDA doesn't even come close to matching.

This is basically new, I used the new smoke colored glass for one drip well full, then cleaned everything out and took pictures.

You get the Aromamizer V2 RDA, with super wide drip tip. It also includes a 510 adapter chuff cap. The inside chimney sheath also has a replacement, that doesn't have fins on it. I don't think you will need that unless you are hitting 120w+ claptons.

It has some O-rings and screws. I can throw in a few extra grub screws and 18650 sleeves if you'd like (please let me know or I'll forget.) This comes in a really nice looking gift box.

Pictures include some stock images.

Also selling some genuine Samsung 25-R R5's. I got 4 and really only need two. Msg in thread if interested. Thanks for looking!

http://imgur.com/a/r5rha

For sale is a fabulous Ladies Mink Fur coat. This coat has been worn only twice, and has been stored in its original cover in a climate controlled environment for the last 30 years. It was a gift from a family member, and is not something I would ever wear.

The mink coat has a liner, and is made without striping of the fur. The pelts used appear to be quite large, and the coat is quite soft. It was taken out of its climate controlled environment, and cover for the pictures then put back into it. For the last 6 months it has not been in a climate controlled environment. The furs used are approx 3"x8".

This would make the perfect addition to any ladies wardrobe. It is both affordable and elegant. The last appraisal for it was done in the mid 80's when it was purchased, and was signed for $10,000. Unfortunately I do not have the appraisal, but would get it professionally appraised for any serious buyer (if it is more than $50 to appraise it, split the cost?)

I will only handle escrow transfers.

Asking price is 10.0 BTC + (you pay)Escrow/tx fees. (I pay)Free tracking, insured shipping. I don't want to pay more than $250 in shipping charges, so if you want overnight & insured for value, and it is more than $250 I will have to request the surplus.


Sorry about the quality of the pictures. I am not a professional photographer but can take any/all the pictures you request. Just let me know.






If you know any way to legitimately valuate this without a paid appraisal, I am open to suggestion. I googled for a few days to try and describe this coat with as many relevant details as possible. I will upload more pictures shortly. Thanks for looking

So who is playing around with coinprism and how?

PM me if you have an account and wanna play around with colored coin stuff.

Have any links to share that are pertinent to how to implement colored coins for various purposes?

(including other protocols meta-descriptions of projects that might be applicable in coinprisms colored coin implementation-->XCP, Ethereum, etc)

This looks amazing! Thank you!

would love one. colored coins are the future of the blockchain revolution.
amitoolate

Very nice, keep em comin!

Actually if you want me to make a mock up of the board I have, there are drastic differences between the posted NANOFURY board and the BITGREFIED board in my hand./


Did you steal a board spec, modify it for the chip reel you bought, and try to profit off it?

If so thats stupid, why not do what you said in chat and design a board to house MANY chips.

Or was that all speculation cause the chip reel you purchased has been spent on the 3k production of the current yellowjacket production?

You dont have any more asic chips to produce a second run of larger chip density boards like you claimed in chat, do you?



Just debunking ass holes who profit off us here is all, not really looking to scam anyone after I been scammed 6+ BTC in my life (and made half that back through legitimate trading!)

3.5 v hub

ALSO What version of the board is the current shipment based on?

I also stated not all devices would be broken.

You're stating 1.6 is the base speed not the 1.8-2.2 in your sales pitches?

You did not update paypal tracking info to reflect a proper return with open claim.

I do not wish to tamper with this device prior to paypal clearance of dispute.

You wanted me to ship the devices to some address in au when the original shipment came from SHENZEN

You issued the claim that I was somehow at fault prior to any acknowledgement of return of goods.

I had been in prior discussion to supply these devices to the community at no profit model and ultimately delivery to new miners as my intention.

After disclosing my issues you somehow came to the conclusion a potential no profit supplier was trying to scam you and defraud your name.

I do not wish to defraud or scam anyone. Your devices are defunct.

Has ANYONE had issues with 1 to 3 units of a 2.2 usb miner on the specified DLINK hub? Not that I can find in google.

If your device does not claim more power req than a BE, then has anyone with 3 block erupters in the same DLINK hub had any issues?

My BF's mentor is dealing with a family situation and cannot address this issue. I don't blame him.



Fact is hub is fried, devices dont operate as specified in hub or usb port && vendor was a giant asshole in cordial communications leading up to a paypal claim.


If you have working yellow jackets, kudos, you got the few in the run that work.

If you are planning on buying, please wait until my paypal claim is finalized to make your judgement. Honestly there is cheaper mining out there.

How much does 2.2 GH/s on CEX.io cost? Cheaper USD than these devices.




Jonathan, I am a nice person, that had legitimate claims, that you did NOT wish to address. As a potential reseller your attitude towards me is less than what a respectable business relationship entails.

Good luck with your financial endeavor. You do not have any vested stake in the R&D  and merely purchased someone else's design for profit off the crypto community.

Did you realize your CHIPS were "worthless" before or after you invested?

What hub that isn't so expensive it offsets the cost of the hardware itself, would you suggest?

Is not this hub one that has performed consistently great for the community?

http://www.dlink.com/us/en/home-solutions/connect/usb/dub-h7-7-port-usb-2-0-hub
    Standard Mode:
        All seven USB ports- 0.5 A per port 2
    Fast-Charge Mode:
        5 standard USB ports- 0.5 A per port 2
        2 USB fast charging ports - 1.2 A per port 2
PSU for HUB: +5v, 3A

So you are telling me this hub is the reason the yellowjackets ic shorted and caused a bridge in the soldering? Please clarify on your intelligent retort. Any reason as to why you stated the hub was the point of failure would be appreciated.

Is it from experience?

In what?

There are units being used right now that have no issues. I am not saying that they all have issues, I am merely saying if they do, which mine obviously do (with testing being done today for proof), shouldn't a business man want to figure out the problem

...My interest in this is to make the device work.

I had hoped to propagate these to many communities both versed and unversed in crypto, but given the business attitude of the original reseller BITGTR, his methods should also be called into question. I do not need to make money off these devices as I make more in trading daily than I make mining yearly.

This community is fraught with mis-info, false claims, and hyped up bullshit. This is the nature of greed, yet the face of it speaks to profit hungry daemons.

If the above sentiment is a vendetta then the English language needs to be updated.

edit: typo on the pun, go figure. Nothing is perfect LOL

I purchased three of these units after speaking with BitGTR owner (name omitted) for the last few months.

He approached us in D7 pool chat for ppc mining.

He made the claims he was intrinsically involved with this device and its R&D.

In chat it comes out he is merely the financer of the project that was started by someone else (I've forgotten his name as I've never spoken to him nor seen the threads about the development of this project before it was taken over by BitGTR).

Upon receipt of these units, I promptly followed the directions on the website (bitgtr & hashratestore) ie plug-and-play with automatic detection in either popular mining program.

Nothing identified - nothing hashing.

I contacted Bitgtr & then tried to troubleshoot. Replacing bfg with cg, installing into a different OS (windows v linux/rpi) and tried again.

This time they did recognize after a bit of tinkering with settings in windows to acknowledge the correct driver for HiD as specified (also not plug and play for me).

I saw them hashing at 1.7-1.8 and walked away. 10 minutes later they were running great 3 yellowjackets on a dlink 7 port hub.

I'm watching my hashrate on the pool server and notice all of a sudden it drops by 1gh/s after 15 minutes.

Then slowly it starts dropping by .1 GH/s at first, then .2, then all of a sudden they just stop.

One thing I noticed (I'll post screens later) is they say CLOCK frequency dropping by %50 reinitializing. This doesn't happen for at least 5 minutes, then it starts happening at increasing intervals until it finally fails.

After they were tested twice to perform in the exact same way, I thought to try it in the USB port on my laptop. Same deal. It starts a bit higher at 2.1, then has the same exact issue. Slowly resets the clock/reinitializes until it no longer is recognized.

After this I think, if the power requirements somehow were 'unhinged' and keep doubling, or halfing, or shorting, perhaps my hub had issues? I tried 5 block erupters and after the 3rd one plugged into this hub would disconnect the last one plugged in, Plug the fourth in, only three show up, plug a fifth in, that one recognizes and the first one is removed from the system devices listing.

The hub had fried.

I bought another DLINK hub as this hub has served me with 6 BE's plugged in hashing at 334 continuously for 3 months. I had purchased it used. Maybe it was just its time.

I plugged only one YJ into the new hub and the same issue resulted. I unplugged it before THIS hub fried. I tested the hub after and 6 BE's work in it fine. The old hub still has the disconnect issue AFTER the yellow jackets were used on it.

I had been in contact with BITGTR and was asking for a refund including shipping. He did acknowledge that he would accept returns but at a different address than the shipped address, and he would only reimburse me after he received.

He did not want to push this return through paypal, as I would be protected in the case he did not wish to refund my money and I had shipped the item back.

He never entered tracking information into PAYPAL to corroborate the shipment, therefor no claim for RETURN could be made. After I had been mentioning my issues with hardware, and asking cordially to find an answer he told me:

" I do not wish for you to be a reseller of my item "

This is fine, but it only comes after he dismissed any claims his item could have damaged my equipment, or that oversight in Shenzen manufacturing could somehow be flawed.

Upon closer inspection I found this (picture). His dismissal of my re-selller status came only after I mentioned this shorted pin, and that my boyfriend could fix them and help troubleshoot.

I mean, what are initial buyers/testers for, right? Well I was sold an item that was proposed to have decent R&D/QC/Troubleshooting support, yet the seller is hesitant at best to make these work on very popular mining gear. It was also noted that initially BitGTR made the claim that although dozens of units had shipped, I was the only one to have issues.

I was order 0012 in his invoicing system. Out of 3000 units if 3 are defective (at least), what percentage is that? I would be hard pressed to believe this figure was the maximum defect allowed from QC.

After mentioning the shorted pin to BiTGTR he not only dismissed the claim that it COULD be the fault of his miners, he mentioned that the device was DELIBERATELY manufactured this way. Anyone with soldering experience can see this is an arbitrary pin short and if two pins were indeed to be soldered together, they would have a joint pad on the board, not soldered above the pins. The corner in which the two pins are crossed does seem suspiciously close to other components.

Perhaps the manufacturing process is slightly off, perhaps my hub just wanted to die and take out three yellow jackets.

My bf's electronics mentor is coming by today to check it out, tinker with one unit, and help us get this working - with opposition and no help from the seller.

Buyer Beware.



http://imgur.com/MlFRLyG,ufVx42u,NLybMob <yellow jacket ic closeups with shorted pins.

CEX.io admin in chat specified that as the 51% network dominance was reached they will announce we will be able to point our contracts at any pool. Now weather they mean any BITCOIN POOL or any SHA-256 is still unknown.

I firmly believe a money making venture will not shoot themselves in the face by destroying the network marketplace in which they are profiting and succeeding. There is no gain in destroying bitcoin now, unless they have some "counter agenda" that is as hilarious as hollywood or obamacare.

They are not a government, entertainment producer nor 'BigPharma.'

Just my 2 mbits.

find her twitter/facebook and tweet tip her!

Coins look amazing, thanks for rushing them out last year for me Anticipating next batch!

Good question, my referral banner ticker is slowly trickling down in GH/s :/ :S

cryptsy
vircurex
btc-e
btc38
coinedup
mcxnow
virvox

omg did I guess it heheh

DSSKLMiHbngSBGFKX7kPmVdfbmi84BVbXc
very thanks

buying uni via escrow. thanks

WTB 500K XIVRA make an offer. I'd like to establish trade history. Thanks.

Some titles:

Silk Road Bust
China Speculates / Yuan Deposits Suspended
Overstock.com
420 dip
R.I.P. Casascius Coins

edit:
End The Fed
USD is FIAT (Does anyone know what fiat means in a financial sense?)

(lol complacent cas is a good one \/  )

Ordered a few, can't wait to see these Thanks for your amazing coins!

Sounds like you have a good idea of how to invest.

Buy low, sell high.

I've been reading babypips website.

There's no wrong spot to buy in unless you are an absolute idiot.

This is the FLOOR, there are a lot of bubbles still, but it is only going up. Long picture.

I was able to make enough to now pay the bills by only a few hours twice a day looking at charts. This is after being coached on forex and market trends by my bf who's dad was a financial trader.


=======================================================================
6 months:
1$ USD -> .009 BTC -> LTC -> NVC -> USD -> LTC/BTC -> CRYPTSY/CEX/COINBASE -> 10GHs + 50LTC + 1BTC + (0.5 btc in 10 alts) + (3.2GHs, RPi Powered Block Erupter Rig).
=======================================================================

Random Notes that you might find interesting:

"I've always believed that if you put in the work, the results will come. I don't do things half-heartedly. Because I know if I do, then I can expect half-hearted results." - Jordan

Each trader should know when to trade and when NOT to trade.
1. Simplicity.
2. Backtest.
3. Learn how your algorithms works
4. Do not trade more than you can afford to lose.

REMEMBER:
Make pips
Keep pips
Repeat


Worst Times to Trade:

Sundays – everyone is sleeping or enjoying their weekend!
Fridays – liquidity dies down during the latter part of the U.S. session.
Holidays – everybody is taking a break.
Major news events – you don’t want to get whipsawed!
During American Idol, the NBA Finals, or the Superbowl.

much satoshi
very panic
many spreads