 Show Posts
|
|
Pages: [1] 2 3 »
|
NUDEZ COIN is a leading platform for VIP Model Experiences, Adult NTF Marketplace, and Private Adult Chats. The project just signed 7 New Adult Content Creators. Many more are applying and being vetted, gearing up for the launch of the exclusive Nudez Coin platform. Hot new promotional video launching this weekend! Nudez is actively forming partnerships with independent adult content platforms. Nudez brand apparel, collectible stickers, and more on the way. This is the Sexiest coin in Crypto. A community-run project with an experienced team in place. The token is deflationary and has autostaking built in, so you make Nudez just by holding it. This ensures our long-term holders in the Nudez Coin family are taken care of. Investors and brand ambassadors own and grow the project together. Ownership Renounced & Liquidity Locked- Audited by Techrate
- Deflationary and Autostaking (1% Burn; 2% Reflection back to Holders)
- NFT, VIP experience platform
- Stellar Adult Content Creators
Contract: 0xE60ef2b118C35c987CE28d3b69f84378F2b84b4a (4% Slippage on Pancake, V2) - Binance Smart Chain (BEP20) ✈️ Professional Website: https://NudezCoin.com ✈️ Telegram: https://t.me/NudeZCoinOfficialchat ✈️ Twitter: https://twitter.com/Nudez_Coin✈️ Chart: https://charts.bogged.finance/?token=0xE60ef2b118C35c987CE28d3b69f84378F2b84b4a
|
|
|
|
|
I'm already running a few nodes and one of them is a Pi. I have already pre-ordered one nimble to try it. I think this one is a great idea!
|
|
|
|
|
Great project, great community!
|
|
|
|
Please advise how to store the wallets? What is the best practice? - Can it be encrypted?
- The wallet.dat file should be copied to a safe place?
- Store Public + WIF keys?
|
|
|
|
I'm running Agama on 3 PCs and updated the wallets on all 3, but I don't have the Mining tab where I can check h/s and threads on one of them. Screenshot: https://snag.gy/D9KqRA.jpg Is it normal behaviour? |
|
|
|
|
Are the time-blocked rewards stored in the wallet.dat file? So, is it enough to backup the wallet.dat only?
|
|
|
|
I have a question about staking: I have VRSC in a transparent wallet (sent to Private address then sent to a transparent one) but It's not increasing. It's about ~20 hours from now. Can somebody explain how does the staking exactly work? Thank you in advance!
Anybody, please explain, thanks! |
|
|
|
|
I have a question about staking: I have VRSC in a transparent wallet (sent to Private address then sent to a transparent one) but It's not increasing. It's about ~20 hours from now. Can somebody explain how does the staking exactly work? Thank you in advance!
|
|
|
|
...
Yes after the failure the funds are still visible in the z-address, I only shielded my mined funds to the z-address.
Did you leave room for the fee by subtracting 0.0001 from the total, or send much less than the amount? Tested it with all possible amounts, even with only 1 VRSC it shows this error message. Can you try the following: 1. Close the wallet software 2. Backup your wallet - on Windows, it is in \Users\<username>\AppData\Komodo\VRSC\ as a file named wallet.dat, on linux ~/.komodo/VRSC/ . 3. Delete everything in that VRSC directory, except VRSC.conf and wallet.dat (it should be fine, just good to backup before deleting anything in that directory) 4. Reload the wallet and wait until sync 5. Confirm your balances It's likely that will solve the problem, and if so, you had some corruption in your local chain state. I have done the needed steps but I can not send even 1 VRSC, screenshot: https://snag.gy/eYXw2V.jpgPlease help Anybody? Verus? Btw i can transfer funds beteeen z addresses but cant transfer to transparent one Hi, I may know what the problem is and if so, there is a fix in the coming wallet. Do you only have money in z-addresses and not t? If so, that will be fixed shortly. I will PM you with something to try. Thx for your reply. Yes, only on z addresses now. Thanks! Hi, I can't PM you. We have intermediate builds that are likely to fix the issue, but they are not considered released. You can try one from my google drive: Windows: https://drive.google.com/open?id=1iLwcq3rP3U3agIY4tDtymqH7VxKAVmwJMac: https://drive.google.com/open?id=18CPZFZ7l8c2praj-XJTeAh9zplGwMC3pLinux: https://drive.google.com/open?id=1ovCJVMY8Eg1NoEq8O73i8AfPOrUExfn8 I hope this helps. It does not solve my problem. Same. Solved, thank you!  |
|
|
|
...
Yes after the failure the funds are still visible in the z-address, I only shielded my mined funds to the z-address.
Did you leave room for the fee by subtracting 0.0001 from the total, or send much less than the amount? Tested it with all possible amounts, even with only 1 VRSC it shows this error message. Can you try the following: 1. Close the wallet software 2. Backup your wallet - on Windows, it is in \Users\<username>\AppData\Komodo\VRSC\ as a file named wallet.dat, on linux ~/.komodo/VRSC/ . 3. Delete everything in that VRSC directory, except VRSC.conf and wallet.dat (it should be fine, just good to backup before deleting anything in that directory) 4. Reload the wallet and wait until sync 5. Confirm your balances It's likely that will solve the problem, and if so, you had some corruption in your local chain state. I have done the needed steps but I can not send even 1 VRSC, screenshot: https://snag.gy/eYXw2V.jpgPlease help Anybody? Verus? Btw i can transfer funds beteeen z addresses but cant transfer to transparent one Hi, I may know what the problem is and if so, there is a fix in the coming wallet. Do you only have money in z-addresses and not t? If so, that will be fixed shortly. I will PM you with something to try. Thx for your reply. Yes, only on z addresses now. Thanks! |
|
|
|
...
Yes after the failure the funds are still visible in the z-address, I only shielded my mined funds to the z-address.
Did you leave room for the fee by subtracting 0.0001 from the total, or send much less than the amount? Tested it with all possible amounts, even with only 1 VRSC it shows this error message. Can you try the following: 1. Close the wallet software 2. Backup your wallet - on Windows, it is in \Users\<username>\AppData\Komodo\VRSC\ as a file named wallet.dat, on linux ~/.komodo/VRSC/ . 3. Delete everything in that VRSC directory, except VRSC.conf and wallet.dat (it should be fine, just good to backup before deleting anything in that directory) 4. Reload the wallet and wait until sync 5. Confirm your balances It's likely that will solve the problem, and if so, you had some corruption in your local chain state. I have done the needed steps but I can not send even 1 VRSC, screenshot: https://snag.gy/eYXw2V.jpgPlease help Anybody? Verus? Btw i can transfer funds beteeen z addresses but cant transfer to transparent one |
|
|
|
...
Yes after the failure the funds are still visible in the z-address, I only shielded my mined funds to the z-address.
Did you leave room for the fee by subtracting 0.0001 from the total, or send much less than the amount? Tested it with all possible amounts, even with only 1 VRSC it shows this error message. Can you try the following: 1. Close the wallet software 2. Backup your wallet - on Windows, it is in \Users\<username>\AppData\Komodo\VRSC\ as a file named wallet.dat, on linux ~/.komodo/VRSC/ . 3. Delete everything in that VRSC directory, except VRSC.conf and wallet.dat (it should be fine, just good to backup before deleting anything in that directory) 4. Reload the wallet and wait until sync 5. Confirm your balances It's likely that will solve the problem, and if so, you had some corruption in your local chain state. I have done the needed steps but I can not send even 1 VRSC, screenshot: https://snag.gy/eYXw2V.jpgPlease help |
|
|
|
Where can I buy VRSC?
Interesting project. Since I am not able to mine I would like to buy some coins. However it seems it is not listed anywhere yet. The opening post is also focusing on the description on the project and lacks of information like roadmap, exchanges, etc. So does the website. Hope those information will be added to the OP soon.
I have a few, please PM me if interested. |
|
|
|
Dev, is it normal that I have 2 wallets? I have a third one too which is empty at the moment. Do I have to save the Address and the WIF to backup my wallets? Thanks! Screenshot: https://paste.pics/355DS |
|
|
|
|
Thanks, I got this:
{ "blocks": 1007, "currentblocksize": 1000, "currentblocktx": 0, "difficulty": 7641174492.147189, "errors": "WARNING: abnormally high number of blocks generated, 463 blocks received in the last 4 hours (240 expected)", "genproclimit": 4, "localhashps": 1597553.142076155, "networkhashps": 2177612415, "pooledtx": 0, "testnet": false, "chain": "main", "generate": true }
Why did I create too many blocks?
|
|
|
|
Dev, I have an Agama running on Win10 - no problem. I have tried to run Agama on Ubuntu and on Fedora (2 different PCs) and it's just stuck giving Loading data please wait. Please check the screenshot: https://snag.gy/IlFUV4.jpg |
|
|
|
|
Please solve the https problem, thanks!
|
|
|
|
|
Website is running. I don't think it's a spam-scam coin. A great product and I believe in it.
|
|
|
|
Great opportunity is coming. I was registered on a site turned out a scam. Well this site is much better from the very beginning, so I’m happy to jump in. Come everybody, more people more fun! |
|
|
|
|
