Show Posts
|
Pages: [1] 2 3 »
|
wallet sometimes has connections but still wont sync, 0 blocks made conf file, added nodes, connects to some sometimes, still 0 block. anyone know why?
Do you run the latest wallet? Make sure that you use the wallet version v1.1.0.0. Try to close wallet, delete all data files, except wallet.dat and xdna.conf, and start wallet again. Thanks m8, worked
|
|
|
wallet sometimes has connections but still wont sync, 0 blocks made conf file, added nodes, connects to some sometimes, still 0 block.
anyone know why?
|
|
|
I challenge you to explain why he cant trade some coins and pay what he owes, I can, everyone on the web can! Then remove coins he knows will not be mined...
Then I challenge you to stop making useless statements.....I really challenge you.....EVERY other pool does it, except zpool with the disappearing/shrinking returns.
|
|
|
you can shapeshift and pay coins you owe, but you don't....then every time you stiff someone, you make more.....nice deal for you, shit for everyone else!
|
|
|
so you put the coin there, I mine it, you owe me 378 of them, YOU decide you don't want to mine it, I get stiffed...SCAM MUCH!
7 weeks since you mined it and its still there.....not sus at all!
|
|
|
are you going to mine Lite Extreme? Its still listed but nothing mined in 7 weeks, its the one coin I would like to be paid in....
|
|
|
im happy to mine this coin, but I cant find a wallet?
|
|
|
node plz
addnode=45.55.83.96 addnode=91.121.67.93 addnode=13.93.84.61
|
|
|
re-install, allowed to sync, correct hash, closed, copied wallet file, reopened, "repairwallet" in console, coins are back, sent to new wallet, then back, works fine
dev said coins are lost......hmmm this project will go far with this expertise behind it....
|
|
|
I installed a new wallet on another pc, it wont sync, just flashes, can I get some nodes please?
|
|
|
I have 2 pcs, I downloaded new wallet, installed, now the connected icon on both pcs just flashes between the little TV logo and wifi signal icon but never connects...
|
|
|
Those coins will be lost. The correct 125k block hash is: f815b128af4bc5d3a89e2cd9c9527c068a74d78a1d44b0e3e8e963602729dd3d even though its on a fork my coins should still be written on the blockchain, my wallet.dat should also work in a new wallet yeah?
|
|
|
yeah mate, I read yours, mine isn't erroring, I cant get on the right blockchain, I must be on a fork because getblockhash 125000 is different from yours
|
|
|
I deleted the entire folder in roaming app and then installed again, put my wallet.dat file but still....
|
|
|
ffs I was away for a month and never read any of this,
I tried fresh install of 2.0.0.1 but I get f66ada7446daef448b372c2fd6b3ae4018a4d0eeedc9f64252c8297c680aefe0 for hash 125000
any ideas?
|
|
|
getblockhash 125000 gives me a different number than mentioned,
how do I delete and rescan blockchain please?
|
|
|
Bitcoin Forum > Alternate cryptocurrencies > Mining (Altcoins) (Moderator: mprep) > A3 error log help
my bad if im wrong, i thought i was in the right place
anybody stupid enough to think all coins are BTC wouldnt be smart enough to plug in their PC so your point is moot....
|
|
|
so for the 3rd time my A3 has shutdown for 45 mins it looks like and I'm not sure why, do I need to return it? Does anyone understand from the log what the problem is? Any help greatly appreciated. Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 1 reinit 5067.57 Apr 3 19:06:11 (none) local0.notice cgminer[375]: chain 2 reinit 4552.05 Apr 3 19:06:11 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02930844 crc5 error,should be 00,but check as 11 Apr 3 19:06:11 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:06:12 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:06:13 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:06:13 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:06:13 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:06:13 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:06:13 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:06:13 (none) local0.notice cgminer[375]: open device over Apr 3 19:06:13 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:06:13 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:06:14 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:06:14 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:06:14 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:06:14 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:06:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:06:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:06:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:06:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:06:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:06:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:06:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:06:16 (none) local0.notice cgminer[375]: open device over Apr 3 19:06:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:06:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:06:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:06:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:06:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:06:18 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 0 reinit 76177.07 Apr 3 19:08:13 (none) local0.notice cgminer[375]: chain 2 reinit 4895.72 Apr 3 19:08:13 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:08:14 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:08:15 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:08:15 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:08:15 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:08:15 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:08:15 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:08:15 (none) local0.notice cgminer[375]: open device over Apr 3 19:08:15 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:08:15 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:08:16 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:08:16 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:08:16 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:08:16 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:08:17 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x6d9429ae crc5 error,should be 00,but check as 04 Apr 3 19:08:17 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:08:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:08:18 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:08:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:08:18 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:08:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:08:18 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:08:18 (none) local0.notice cgminer[375]: open device over Apr 3 19:08:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:08:18 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:08:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:08:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:08:19 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:08:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 0 reinit 135963.83 Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 1 reinit 5840.44 Apr 3 19:10:15 (none) local0.notice cgminer[375]: chain 2 reinit 4466.25 Apr 3 19:10:15 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:10:15 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:10:16 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:10:16 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:10:16 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:10:16 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:10:16 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:10:16 (none) local0.notice cgminer[375]: open device over Apr 3 19:10:16 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:10:16 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:10:17 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:10:17 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:10:17 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:10:17 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:10:18 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:10:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:10:20 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:10:20 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:10:20 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:10:20 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:10:20 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:10:20 (none) local0.notice cgminer[375]: open device over Apr 3 19:10:20 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:10:20 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:10:21 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:10:21 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:10:21 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:10:21 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:10:22 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x2f42b1e4, diff: 0xa3, wc: 0x19, crc_received: 0xff, crc_checked: 0x10,chainid: 0x00 Apr 3 19:10:22 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:10:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:10:23 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:10:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:10:23 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:10:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:10:23 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:10:23 (none) local0.notice cgminer[375]: open device over Apr 3 19:10:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:10:23 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:10:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:10:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:10:24 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:10:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 0 reinit 4466.47 Apr 3 19:12:16 (none) local0.notice cgminer[375]: chain 1 reinit 5067.67 Apr 3 19:12:16 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x44238c01, diff: 0xa2, wc: 0x5e, crc_received: 0xff, crc_checked: 0x18,chainid: 0x01 Apr 3 19:12:16 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:12:17 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:12:18 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:12:18 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:12:18 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:12:18 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:12:18 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:12:18 (none) local0.notice cgminer[375]: open device over Apr 3 19:12:18 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:12:18 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:12:19 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:12:19 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:12:19 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:12:19 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:12:20 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x40c29ca0 crc5 error,should be 00,but check as 05 Apr 3 19:12:20 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:12:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:12:21 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:12:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:12:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:12:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:12:22 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:12:22 (none) local0.notice cgminer[375]: open device over Apr 3 19:12:22 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:12:22 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:12:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:12:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:12:22 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:12:23 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 1 reinit 4637.92 Apr 3 19:14:18 (none) local0.notice cgminer[375]: chain 2 reinit 80392.75 Apr 3 19:14:18 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:14:18 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:14:19 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:14:19 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:14:19 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:14:19 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:14:19 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:14:19 (none) local0.notice cgminer[375]: open device over Apr 3 19:14:19 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:14:19 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:14:20 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:14:20 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:14:20 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:14:20 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:14:21 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0xc48bfe01, diff: 0xa3, wc: 0x5c, crc_received: 0xff, crc_checked: 0x00,chainid: 0x01 Apr 3 19:14:21 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:14:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:14:23 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:14:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:14:23 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:14:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:14:23 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:14:23 (none) local0.notice cgminer[375]: open device over Apr 3 19:14:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:14:23 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:14:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:14:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:14:24 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:14:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 0 reinit 4724.12 Apr 3 19:16:20 (none) local0.notice cgminer[375]: chain 2 reinit 5067.71 Apr 3 19:16:20 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:16:20 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:16:21 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:16:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:16:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:16:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:16:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:16:21 (none) local0.notice cgminer[375]: open device over Apr 3 19:16:21 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:16:21 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:16:22 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:16:22 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:16:22 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:16:22 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:16:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0xfa84aeaf crc5 error,should be 00,but check as 10 Apr 3 19:16:23 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:16:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:16:25 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:16:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:16:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:16:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:16:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:16:25 (none) local0.notice cgminer[375]: open device over Apr 3 19:16:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:16:25 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:16:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:16:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:16:26 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:16:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 0 reinit 5411.15 Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 1 reinit 5153.51 Apr 3 19:18:21 (none) local0.notice cgminer[375]: chain 2 reinit 5067.60 Apr 3 19:18:21 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:18:22 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:18:23 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:18:23 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:18:23 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:18:23 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:18:23 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:18:23 (none) local0.notice cgminer[375]: open device over Apr 3 19:18:23 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:18:23 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:18:24 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:18:24 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:18:24 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:18:24 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:18:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x03f84944 crc5 error,should be 00,but check as 0e Apr 3 19:18:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:18:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:18:26 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:18:26 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:18:26 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:18:26 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:18:26 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:18:26 (none) local0.notice cgminer[375]: open device over Apr 3 19:18:26 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:18:26 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:18:27 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:18:27 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:18:27 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:18:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:18:28 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x204aa68c, diff: 0xa3, wc: 0x00, crc_received: 0x80, crc_checked: 0x16,chainid: 0x00 Apr 3 19:18:28 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:18:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:18:30 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:18:30 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:18:30 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:18:30 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:18:30 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:18:30 (none) local0.notice cgminer[375]: open device over Apr 3 19:18:30 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:18:30 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:18:31 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:18:31 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:18:31 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:18:31 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 0 reinit 4724.10 Apr 3 19:20:23 (none) local0.notice cgminer[375]: chain 1 reinit 4552.32 Apr 3 19:20:23 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x012f4dc4 crc5 error,should be 00,but check as 02 Apr 3 19:20:23 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:20:24 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:20:25 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:20:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:20:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:20:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:20:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:20:25 (none) local0.notice cgminer[375]: open device over Apr 3 19:20:25 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:20:25 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:20:26 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:20:26 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:20:26 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:20:26 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:20:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:20:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:20:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:20:28 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:20:28 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:20:28 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:20:28 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:20:28 (none) local0.notice cgminer[375]: open device over Apr 3 19:20:28 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:20:28 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:20:29 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:20:29 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:20:29 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:20:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:22:25 (none) local0.notice cgminer[375]: chain 1 reinit 3607.25 Apr 3 19:22:25 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0122ba29 crc5 error,should be 00,but check as 0e Apr 3 19:22:25 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:22:26 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:22:27 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:22:27 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:22:27 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:22:27 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:22:27 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:22:27 (none) local0.notice cgminer[375]: open device over Apr 3 19:22:27 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:22:27 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:22:28 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:22:28 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:22:28 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:22:28 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 0 reinit 4466.25 Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 1 reinit 5067.59 Apr 3 19:24:27 (none) local0.notice cgminer[375]: chain 2 reinit 4981.53 Apr 3 19:24:27 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x62f4b2a0 crc5 error,should be 00,but check as 12 Apr 3 19:24:27 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:24:27 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:24:28 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:24:29 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:24:29 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:24:29 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:24:29 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:24:29 (none) local0.notice cgminer[375]: open device over Apr 3 19:24:29 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:24:29 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:24:30 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:24:30 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:24:30 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:24:30 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:24:31 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:24:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:24:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:24:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:24:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:24:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:24:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:24:32 (none) local0.notice cgminer[375]: open device over Apr 3 19:24:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:24:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:24:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:24:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:24:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:24:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:24:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x006bad96 crc5 error,should be 00,but check as 0d Apr 3 19:24:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:24:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:24:36 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:24:36 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:24:36 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:24:36 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:24:36 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:24:36 (none) local0.notice cgminer[375]: open device over Apr 3 19:24:36 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:24:36 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:24:37 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:24:37 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:24:37 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:24:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 0 reinit 4638.10 Apr 3 19:26:29 (none) local0.notice cgminer[375]: chain 1 reinit 5668.77 Apr 3 19:26:29 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x011ea229 crc5 error,should be 00,but check as 17 Apr 3 19:26:29 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:26:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:26:31 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:26:31 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:26:31 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:26:31 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:26:31 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:26:31 (none) local0.notice cgminer[375]: open device over Apr 3 19:26:31 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:26:31 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:26:32 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:26:32 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:26:32 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:26:32 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:26:33 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:26:33 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:26:34 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:26:34 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:26:34 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:26:34 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:26:34 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:26:34 (none) local0.notice cgminer[375]: open device over Apr 3 19:26:34 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:26:34 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:26:35 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:26:35 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:26:35 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:26:36 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 0 reinit 4809.67 Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 1 reinit 4980.98 Apr 3 19:28:30 (none) local0.notice cgminer[375]: chain 2 reinit 3864.68 Apr 3 19:28:30 (none) local0.notice cgminer[375]: reset_hash_board_low 2 Apr 3 19:28:31 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:28:32 (none) local0.notice cgminer[375]: reset_hash_board_high 2 Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:28:32 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2 Apr 3 19:28:32 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok Apr 3 19:28:32 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2] Apr 3 19:28:32 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok Apr 3 19:28:32 (none) local0.notice cgminer[375]: open device over Apr 3 19:28:32 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 4 Apr 3 19:28:32 (none) local0.notice cgminer[375]: Now Set [2] Chain Address Apr 3 19:28:33 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:28:33 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain Apr 3 19:28:33 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor Apr 3 19:28:33 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -8, Apr 3 19:28:34 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x02a21429 crc5 error,should be 00,but check as 05 Apr 3 19:28:34 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:28:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:28:35 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:28:35 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:28:35 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:28:35 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:28:35 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:28:35 (none) local0.notice cgminer[375]: open device over Apr 3 19:28:35 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:28:35 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:28:36 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:28:36 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:28:36 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:28:37 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8, Apr 3 19:28:37 (none) local0.err cgminer[375]: bitmain_scanhash: get nonce: 0x203bbce2, diff: 0xa0, wc: 0x00, crc_received: 0x80, crc_checked: 0x17,chainid: 0x00 Apr 3 19:28:37 (none) local0.notice cgminer[375]: reset_hash_board_low 0 Apr 3 19:28:38 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:28:39 (none) local0.notice cgminer[375]: reset_hash_board_high 0 Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:28:39 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0 Apr 3 19:28:39 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok Apr 3 19:28:39 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0] Apr 3 19:28:39 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok Apr 3 19:28:39 (none) local0.notice cgminer[375]: open device over Apr 3 19:28:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 4 Apr 3 19:28:39 (none) local0.notice cgminer[375]: Now Set [0] Chain Address Apr 3 19:28:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:28:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain Apr 3 19:28:40 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor Apr 3 19:28:40 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -9, Apr 3 19:30:32 (none) local0.notice cgminer[375]: chain 1 reinit 4638.21 Apr 3 19:30:32 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x0033c928 crc5 error,should be 00,but check as 02 Apr 3 19:30:32 (none) local0.notice cgminer[375]: reset_hash_board_low 1 Apr 3 19:30:32 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok Apr 3 19:30:33 (none) local0.notice cgminer[375]: reset_hash_board_high 1 Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain Apr 3 19:30:33 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1 Apr 3 19:30:33 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok Apr 3 19:30:33 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1] Apr 3 19:30:33 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok Apr 3 19:30:33 (none) local0.notice cgminer[375]: open device over Apr 3 19:30:33 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 4 Apr 3 19:30:33 (none) local0.notice cgminer[375]: Now Set [1] Chain Address Apr 3 19:30:34 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61 Apr 3 19:30:34 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0 Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain Apr 3 19:30:34 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor Apr 3 19:30:35 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -8,
sorry its so long, but this is what has happening when it was shutdown, I have no idead what most of it means. Moderator's note: This post was edited by frodocooper to add code tags.
|
|
|
someone must have working nodes?
|
|
|
|