Show Posts
|
Pages: [1]
|
Thanks,Ron. I got it. By the way, I like the MSC project very much and look forward to your Omniwallet. After I bought or sold TMSC by wallet exchange when testing , I checked my address in bitcoin block explorer, I got this message as follow 1EXoDusjGwvnjZUyKkxZ4UHEf77z6A5S4P 0.00006 BTC (Escrow 1 of 157rMRZUve... 1PJCYPLdjP...) 0.00018 BTC I'm confused with the Escrow line,could you please tell me what does it mean,where did the 0.00018BTC go to? In addition,when buying or selling TMSC using wallet p2p exchange,I cancel my transaction,but I still have to pay for 0.00035BTC . I don't think it's reasonable.
The 'Escrow' is actually a multisig address. It's what we call "Class B transaction" - see the spec. You need not worry about it, it's just an implementation detail. Regarding canceling orders - any action that changes the state of the DEx needs to be broadcast as a bitcoin transaction - there is no way to do that without paying the minimal transaction fee. Note that 0.00035BTC currently equals about 22 cents. The DEx does not work like centralized exchanges, it has benefits and downsides. One of the downsides, unfortunately, is fees that needs to be paid per operation. However consider when buying large blocks on the DEx, you will not pay a relative fee, but rather just a fixed amount - so it should end up cheaper (not to mention you don't need to trust an exchange).
|
|
|
After I bought or sold TMSC by wallet exchange when testing , I checked my address in bitcoin block explorer, I got this message as follow 1EXoDusjGwvnjZUyKkxZ4UHEf77z6A5S4P 0.00006 BTC (Escrow 1 of 157rMRZUve... 1PJCYPLdjP...) 0.00018 BTC I'm confused with the Escrow line,could you please tell me what does it mean,where did the 0.00018BTC go to? In addition,when buying or selling TMSC using wallet p2p exchange,I cancel my transaction,but I still have to pay for 0.00035BTC . I don't think it's reasonable.
|
|
|
When I started my wallet client today,I have this error messages and my client displayed not syncronized. When I restarted the client,it still hung at the block 289803 and got the same messages. DEBUG: Block Analysis for: 289789 DEBUG: Block Analysis for: 289790 BLOCKSCAN: Found MSC transaction (simple send): b30c0a6a6c753dc7d1cce3580aa28258a75748f32de8e9f5dd4567524c94a280 DEBUG: Block Analysis for: 289791 DEBUG: Block Analysis for: 289792 DEBUG: Block Analysis for: 289793 DEBUG: Block Analysis for: 289794 DEBUG: Block Analysis for: 289795 DEBUG: Block Analysis for: 289796 DEBUG: Block Analysis for: 289797 DEBUG: Block Analysis for: 289798 DEBUG: Block Analysis for: 289799 DEBUG: Block Analysis for: 289800 DEBUG: Block Analysis for: 289801 DEBUG: Block Analysis for: 289802 DEBUG: Block Analysis for: 289803 BLOCKSCAN: Found MSC transaction (simple send): 464245fb57cf539fd4a2d987d9abed0c820add5bb304a9ee752711f829a8fe41 BLOCKSCAN: Found MSC transaction (simple send): 53d75f221fad5a497bc8c5c1fe942345d51851ec4850cda733e491263be7ecb6 BLOCKSCAN: Found MSC transaction (simple send): 2751409e5ac3acf2f76a4b8723816567ebda0188054272921ce73b126e64981e BLOCKSCAN: Found MSC transaction (simple send): 9480f5fb41d8d477df89093947cf293e11266867d4b97eb7d0c10d2c0dc89b50 DEBUG: Block Analysis for pending transactions BLOCKSCAN: Transaction processing starting... ERROR: Blockchain scanning thread threw exception : The column name is not valid. [ Node name (if any) = ,Column name = ADDRESS ] DEBUG: Thread exited with error condition.
|
|
|
When I sent payment,there was debug messages as follow and my wallet became "not synchronzied ". After I restarted the wallet client the error is the same and I cannot synchronize. Then I restart both bitcoin-qt and msc wallet client, it's ok.
DEBUG: Sanity checking balances table... BLOCKSCAN: Finished, sleeping. DEBUG: Thread exited. DEBUG: Thread 'workthread' starting... STATUS: Connection to bitcoin RPC established & sanity check OK. STATUS: Connection to database established & sanity check OK. STATUS: Database starting at block 289322 STATUS: Network is at block 289327 STATUS: 5 blocks to catch up DEBUG: Block Analysis for: 289322 DEBUG: Block Analysis for: 289323 DEBUG: Block Analysis for: 289324 DEBUG: Block Analysis for: 289325 DEBUG: Block Analysis for: 289326 DEBUG: Block Analysis for: 289327 BLOCKSCAN: Found MSC transaction (accept offer): 485aecab6cf60af5cf2e50fa6fea71226e2efa1c091e084e33ce1bfc7a8e5a09 DEBUG: Block Analysis for pending transactions BLOCKSCAN: Found pending MSC transaction (simple send): 37372d20fd5cd5bfa98b0a53072e775d333eaa55c960ec63c8117a7732cfbefa BLOCKSCAN: Transaction processing starting... DEBUG: Enumerating addresses... ERROR: Blockchain scanning thread threw exception : 添加或减去的值产生无法表示的(my translation : "The added or subtracted value results in an un-representable") DateTime。 参数名(my translation "parameter name"): value DEBUG: Thread exited with error condition.
|
|
|
Zathras,after I set font size to 100%,the popup window is ok. The blue color bottom line of the Rectangular buying popup window isn't there, is't ok? Hmm.. did also not help. It's pretty late here already, so I guess the next round comes tomorrow. Cheers! DexX - No worries, thanks for helping test - greatly appreciated I'll see about some further testing my end... Pplwjd - Just for a test, could you set font size to 100% and then see if everything looks right? You can set it back to 125% afterwards. I'd just like to see if that's part of the issue. Thanks Zathras
|
|
|
Thank you dexX7 To Zathras, my os is win7 and language is chinese. Screen Resolution is 1680*1050 and I changed my screen fonts size 125% so that I can see it comfortably. The chart is still broken, but I assume the the culture info is only set for the specific thread and not globally. I'm not aware of a workaround, but it's probably worth to look into and to combat this whenever possible. Could also lead to broken queries, if floating points are used somewhere for example. Thread.CurrentThread.CurrentCulture = System.Globalization.CultureInfo.InvariantCulture Has a broader effect and is not only limited to decimal marks, so something related may be preferred. The image from pplwjd: https://i.imgur.com/vwEK0WC.jpgedit: sent you some! 53e7ecbbdafb260e66531f4743dd6f5d332c2f0463148b14368be1ebfde28ff2 (0.005 MSC) cd0923045d076fc9fbdae6c6f2d601cc549667b21e2e949fcbabb64e592f8541 (0.2 TMSC) Will probably take a few minutes until it's visible on masterchest.info. Good point - the chart is drawn by the scanning thread - as a stop gap while I look into invariantculture I've added to scanning thread - can you please try again? Pplwjd - that's bizarre - seems it can't even find the right fonts etc - what OS & language is that & any customizations (DPI, scaling etc)? Thanks Zathras
|
|
|
When I buying,the screen became like this,wish it's helpful. By the way I like the UI style of this wallet very very much. Could somebody else please send me a little TMSC so that I can go on the testing. My address is 1Bohpd8tqJe4BdDFNctrzPhCmA2soCYspn, thanks.
|
|
|
wow,great,I have been looking forward to p2p exchange so long. Now it's come true at last,I'm so excited. It's great things in cryptocurrency market.
|
|
|
I have been paying much attention to the project. I'm trying the wallet and it's syncronizing now. I like the style and great job,guys. Thank you Zathras. By the way, I think it's a little technical and complicated, the easier the better. Maybe you guys can find somebody who have little knowledge about IT and cryptocoins to use and test it and give you their advice. In addition, when selling MSCs why not list all the selling list and let users referring to the price now in the market.
|
|
|
Can I buy some assets from others who sell lower price than my offered and higher amount than mine? Eventually. You mean NGCCC will support Matchmaking Tradeoff eventually ? Another question,what does atom and unit mean when issuing a asset . That dialog is rather confusing, we'll change it in new version. Basically, "atoms" is number of satoshi in one unit. "units" means how many units you want to issue, i.e. quantity of units. I can understand 'units', but what 'the number of satoshi in one unit' is used for ? It is only used for calculating BTC for issuing asset and then define the colored BTC? Thank you for your patience.
|
|
|
And I received the followiing message,I don't know if it has any help. Hmm, haven't seen this one yet: when does it happen? I'm not sure when does it happen.It doesn't always occur,I think it has nothing to do with my operation. I have tried the P2P trade,I found I can only make deal with somebody who offered the same amount and the same price. Can I buy some assets from others who sell lower price than my offered and higher amount than mine? Another question,what does atom and unit mean when issuing a asset . Where does the colored btc go and colored BTCs can be uncolored and used again? In addition,I sent PM to you,pls check it. Thanks.
|
|
|
It's very nice of you guys,Killerstorm and NuclearReactor.Thank you for your helps and I have built my windows version and I can see the NGCCC test client GUI. I am so excited. I had some test bitcoins and I tried issuing some new assets but I don't know how can I get the new assets balance? And I received the followiing message,I don't know if it has any help.
D:\ngccc-0.0.1-win32>ngccc-gui Exception in thread Thread-1: Traceback (most recent call last): File "C:\Python27\lib\threading.py", line 810, in __bootstrap_inner File "C:\projects\ngcccbase\ngcccbase\p2ptrade\comm.py", line 111, in run File "C:\projects\ngcccbase\ngcccbase\p2ptrade\comm.py", line 56, in poll_and dispatch File "C:\Python27\lib\urllib2.py", line 127, in urlopen File "C:\Python27\lib\urllib2.py", line 404, in open File "C:\Python27\lib\urllib2.py", line 422, in _open File "C:\Python27\lib\urllib2.py", line 382, in _call_chain File "C:\Python27\lib\urllib2.py", line 1214, in http_open File "C:\Python27\lib\urllib2.py", line 1184, in do_open URLError: <urlopen error [Errno 10060] >
Traceback (most recent call last): File "C:\projects\ngcccbase\ui\sendcoinspage.py", line 147, in btnSendClicked File "C:\projects\ngcccbase\ui\wallet.py", line 94, in send_coins File "C:\projects\ngcccbase\wallet_controller.py", line 66, in send_coins TypeError: 'AssetDefinition' object is not iterable Traceback (most recent call last): File "C:\projects\ngcccbase\ui\sendcoinspage.py", line 147, in btnSendClicked File "C:\projects\ngcccbase\ui\wallet.py", line 94, in send_coins File "C:\projects\ngcccbase\wallet_controller.py", line 66, in send_coins TypeError: 'AssetDefinition' object is not iterable Traceback (most recent call last): File "C:\projects\ngcccbase\ui\sendcoinspage.py", line 147, in btnSendClicked File "C:\projects\ngcccbase\ui\wallet.py", line 94, in send_coins File "C:\projects\ngcccbase\wallet_controller.py", line 66, in send_coins TypeError: 'AssetDefinition' object is not iterable 0100000001a1ee9d8598639e08e0afd82d6f19ef3f45300120096046f023502810690ad47700000 008b48304502210083cf7a6e45ac75dec7fd9b7aa2aeacb092ef18910a71568b3ab5de586a06135 02205966ca904767ad883694b8449ac1c3897e0eb6fc005c75561fabc07c84400f5401410453088 981983c6704ecc821fc174b08eaf821b052c8d68620b9216183b48849afd375778acdd5cc1d6f6e dfdf494e50860714973ddefb597f4dc697f59e38ddffffffff0280969800000000001976a914d38 438fd398840f56653527b9a51f1b513b80c588acb0f69e0a000000001976a914afd2248ba711495 6ea776b8ca1272932368d68888ac00000000 u'testcoin'
|
|
|
What is the dependency for the windows version.Should I install bitcoind and sip,pyqt4 etc.Anybody can give me a guide,thank you.
|
|
|
I want to buy MSC 30 @0.12,PM me pls. Escrow only.
|
|
|
please cancel my buying order from the book, thanks.
2-Dec pplwjd 0.1300 10 1.30
|
|
|
I want to buy 10 MSC @ 0.13
PM me, thanks.
|
|
|
I'm beginner here. I want to buy some MSCs,how to do it,anyone else help me?
|
|
|
nice to see newbie help newbie too, we should read full polcy before starting.
|
|
|
|