Show Posts
|
Pages: [1] 2 »
|
Would like to help beta testing!
|
|
|
So did something go wrong with the dev-mastercoin send? Because all bounty addresses seem to be out of consenus.
@masterchain.info: When trying to add another address to my wallet, my wallet got deleted. I think the UUID is still the same(815369f9-6558-4a30-b29e-04e413bd64f5), but no addresses are shown anymore. 'Sync with server' doesn't seem to do anything.
|
|
|
I just encountered the same problem, can't cancel my order.
Also, the message 'ping?' isn't really helpful at masterchain.info when trying to create a sell offer while another one is active. When I try to cancel the offer(that is using 0 as amount), I also get 'ping?' after a long delay.
Understood - please open a bug - https://github.com/grazcoin/mastercoin-tools/issuesI think something is wrong with the server, trying to accept an offer returns the same message.
|
|
|
Another weird thing is the timelimit: I made an offer today and someone accepted and payed 15 minutes later(issued the tx at least). Now the timelimit was set to 20 blocks and I think it took about 24 blocks until the payment was confirmed... So basically I got free bitcoin while the other person payed in a timely manner from his point of view(15 minutes), but due to the nature of complexer transactions, fees and the mercy of miners his transaction got delayed. It was just a tiny amount(0.00012), but if people are unaware of this, it can cause quite some financial damage to them. This system appears unreliable to me. There should at least be warnings in the wallets/clients if users want to issue/accept an offer with an unreasonable short time limit.
|
|
|
I just encountered the same problem, can't cancel my order.
Also, the message 'ping?' isn't really helpful at masterchain.info when trying to create a sell offer while another one is active. When I try to cancel the offer(that is using 0 as amount), I also get 'ping?' after a long delay.
|
|
|
I successfully did a TMSC send with the wallet, but something is wrong - I had 0.418 TMSC before and sent 0.018. The wallet shows the right balance afterwards(0.4), but masterchest and masterchain show 0.297 . Is it because of open sellorders? I've never cancelled them I think. Here is the log: Recipient address is valid. Raw transaction hex: 0100000001060c0a8e198b835bb18304fa8d19c08c52375f6bb63d25f998a61dc7c43d77fe0000000000ffffffff0450f00000000000001976a9142543163c517c4a59b2f4f6dd19a09d21c0093be288ac70170000000000001976a914946cb2e08075bcbaf157e47bcb67eb2b2339d24288ac70170000000000001976a9143c66ad4a06411af4e5a0d9f34e244969bee3adb088ace02e000000000000475121022b733322d7e855766a5bc4ad8f9707115980095d60d4ac138d507319702aa54321029B07F670D5FC1B4E93BE50BF51499F3C967BBD8BC133E1D012DDE615A2383B2652ae00000000 Raw transaction decode: {"result":{"txid":"9d62eeb6588cb982bf4712ac35f55af69cb739f9e1ad270b25592d069b9206b9","version":1,"locktime":0,"vin":[{"txid":"fe773dc4c71da698f9253db66b5f37528cc0198dfa0483b15b838b198e0a0c06","vout":0,"scriptSig":{"asm":"","hex":""},"sequence":4294967295}],"vout":[{"value":0.00061520,"n":0,"scriptPubKey":{"asm":"OP_DUP OP_HASH160 2543163c517c4a59b2f4f6dd19a09d21c0093be2 OP_EQUALVERIFY OP_CHECKSIG","hex":"76a9142543163c517c4a59b2f4f6dd19a09d21c0093be288ac","reqSigs":1,"type":"pubkeyhash","addresses":["14Q2NNiF5YzDZCjo7vrBuHdbZcmHRJyW3j"]}},{"value":0.00006000,"n":1,"scriptPubKey":{"asm":"OP_DUP OP_HASH160 946cb2e08075bcbaf157e47bcb67eb2b2339d242 OP_EQUALVERIFY OP_CHECKSIG","hex":"76a914946cb2e08075bcbaf157e47bcb67eb2b2339d24288ac","reqSigs":1,"type":"pubkeyhash","addresses":["1EXoDusjGwvnjZUyKkxZ4UHEf77z6A5S4P"]}},{"value":0.00006000,"n":2,"scriptPubKey":{"asm":"OP_DUP OP_HASH160 3c66ad4a06411af4e5a0d9f34e244969bee3adb0 OP_EQUALVERIFY OP_CHECKSIG","hex":"76a9143c66ad4a06411af4e5a0d9f34e244969bee3adb088ac","reqSigs":1,"type":"pubkeyhash","addresses":["16WNYdM4whfD9gV3shX35rmHqbYzTJ6xEG"]}},{"value":0.00012000,"n":3,"scriptPubKey":{"asm":"1 022b733322d7e855766a5bc4ad8f9707115980095d60d4ac138d507319702aa543 029b07f670d5fc1b4e93be50bf51499f3c967bbd8bc133e1d012dde615a2383b26 2 OP_CHECKMULTISIG","hex":"5121022b733322d7e855766a5bc4ad8f9707115980095d60d4ac138d507319702aa54321029b07f670d5fc1b4e93be50bf51499f3c967bbd8bc133e1d012dde615a2383b2652ae","reqSigs":1,"type":"multisig","addresses":["14Q2NNiF5YzDZCjo7vrBuHdbZcmHRJyW3j","14inwuhpBTew2C8EenXW2L7xMDWx9Jti5h"]}}]},"error":null,"id":"1"}
Signing appears successful. Transaction sent, ID: 9e52649ea61ad6d69c228c6b252d261fc6ae62fba25228c2c10a609f22969d90
|
|
|
So, after about 3 days of sync'ing the wallet I tried to do a send of TMSC. The response was that there's not enough funds in my wallet to cover the tx fee. I got about 0.0004 BTC in that address.. What is the tx fee set to? 0.001?
|
|
|
Any guidance on what needs to be tested currently?
|
|
|
Could you reproduce the error?
|
|
|
Testing work:
Installed Bitoy's wallet on 2 systems, but couldn't get those to work. Currently communicating with Bitoy to find and resolve the issues.
Extensive testing of DEx and giving feedback over the last few days using grazcoin's HybridWebWallet and testing plan. Addresses used: 1G3P5bws8wRVrVfKWxv8F85pRjs9qXyyA6 14Q2NNiF5YzDZCjo7vrBuHdbZcmHRJyW3j 1NVNkPqSLo4N2seaZCzAkVFPjcGLPJSZAZ
|
|
|
@grazcoin Test 1: Theres no partially done/ wrong symbol showing up. Test 2: Sale offer status does not change to done after the full amount has been bought and paid. Test 3: After expiration of the bid, the symbol of the sale offer stays half blue/green. Test 4: The partially done/fully accepted doesnt show up either. Test 5: Cancelled offers still show up. Someone mentioned it before I think. Test 7: Sell accept goes through, even though offer was cancelled before. Test 8: I bid 0.02 from 1NVNkPqSLo4N2seaZCzAkVFPjcGLPJSZAZ, and the amount accepted is listed as 0.02, even though only 0.01 was offered. Someone else bid on it aswell, and both offers show up as accepted. https://masterchain.info/selloffer.html?tx=b9e6b1f6f428441d7e91e7715ed4524de942b8d755367828e1d85ca850a9dc43¤cy=TMSCAre multiple sell offers per address a feature or a bug? I've got 3 on one address, 2 of them have the same price. There's also something off with amounts for sell/available. Take a look at https://masterchain.info/selloffer.html?tx=8b2deeb03c2590bbc6698ab3d663eb920e8bb7e89437a7984a54b8d0154d6741¤cy=TMSC . 0.01 were initially available, 0.002 + 0.007 were bought, so only 0.001 should remain, but amount available shows 0.003. Also, newly created offers seem to always show 0 as amount available, shouldn't it match the amount for sell?
|
|
|
Win 7, have tried it both on 32 and 64 bit.
|
|
|
Yes, I've run setup.exe before. I did all the steps you mentioned prior to that.
|
|
|
Transactions before and after worked well, just wanted to mention that transactions can still fail, despite the notification "Transaction sent". Also, I didn't know that the TX is being sent client-wise.
Btw, is there a way to send the signed transaction using bitcoin-qt? I've tried sendrawtransaction with the signed raw transaction, but I get 'TX rejected (code -22)'. Would it speed up confirming the TX, since blockchain.info shows a queue position? Or do they broadcast the transaction straight away?
|
|
|
This pops up first after I run the .exe: ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FMNN2rkd.png&t=663&c=5YVVgsxqjyOMtA) I can't set the language to english unfortunately, but it says: System can't find requested file.
|
|
|
Bitoy will be able to help you better but just a few pages back I had issues and found..
-Make sure you have none of you're files in your MyMastercoins folder set to read only! (You can do this by Right Click: Properties and make sure the box is un-checked) (Additionally make sure you have Full Control as an Administrator, you can do this as well by Right Click: Properties: Security make sure you have "Full Control")
Though that shouldn't have anything to do with Exception thrown: File not found.
I had a issue with the main setup.exe so I actually go into the MyMastercoinsTCW_1_0_0_1 folder and run MyMastercoinsTCW (Application).
None of the files are read-only. How did you run MyMastercoinsTCW (Application) from the MyMastercoinsTCW_1_0_0_1 folder? If I try that, I get: ' You cannot start application MyMastercoinsTCW from this location because it is already installed from a different location'. I have MyMastercoinsTCW (Application) twice, once in the mymastercoinsTCW folder and the other in MyMastercoinsTCW_1_0_0_1. If I run the one from mymastercoinsTCW I get the file not found stuff again. Is having MyMastercoinsTCW (Application) twice the problem?
|
|
|
|