 Show Posts
|
|
Pages: [1]
|
This is not working for me, the old one was working. After 12 hours syncing its stuck and frozen. I will downgrade this again. Which .conf are you using? Try with this one while syncing: rpcuser=username rpcpassword=password rpcallowip=127.0.0.1 noirc=1 listen=1 dnsseed=1 server=0 connet=54.84.46.196 connet=87.98.188.77 connet=54.215.241.255 connet=50.147.45.28 connet=54.84.46.196 connet=87.98.188.77 connet=54.215.241.255 connet=50.147.45.28 The process is just a little bit slow, but my wallet is now synced (I Hope). |
|
|
|
There is something strange/wrong with the new explorer. One of my wallet show a wrong coin amount, there are two wrong output TX.
[IMG]
That is PoS, does you wallet balance match ? My wallet, that is synced with the same chain of the explorer show the right amount, roughly 101K with about 6k of POS coins |
|
|
|
There is something strange/wrong with the new explorer. One of my wallet show a wrong coin amount, there are two wrong output TX.  |
|
|
|
bittrex block count on their status page is off, not sure if they are catching up, or having an issue.
bittrex FLT 89412
explorer 89530
and my wallet isn't in sync either...89412 is the chain i'm on, explorer is at 89530. wallet is trying to recover, but alas, i have to resync. Looks like it forked again, there's 27MH on the 89412 "getmininginfo", and explorer is reporting 32MH.
everytime, we are losing sync with the chain the following type of messages are showing up
Postponing 235 reconnects
REORGANIZE
REORGANIZE: Disconnect 117 blocks; 00000001da2e32e7dd8f..0000000047e017eecacd
REORGANIZE: Connect 7 blocks; 00000001da2e32e7dd8f..55bd79017bb3b30d7d31
ACCEPTED: proof-of-transaction block at height 89297
ERROR: CheckCoinbaseTx() : calculated coinbase 20000000, desination, or address do not match the actual block 89297
ERROR: Reorganize() : ConnectBlock 00000001644472398fbb failed
InvalidChainFound: invalid block=0d2738db156c505d5adf height=89537 trust=4112103969622 blocktrust=106119702 date=06/26/14 14:30:25
InvalidChainFound: current best=0000000047e017eecacd height=89412 trust=4067641334773 blocktrust=3 date=06/26/14 14:00:34
ERROR: SetBestChain() : Reorganize failed
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
I mean everytime i go out of sync, i see ACCEPTED: proof-of-transaction block at height xxxxxx, thinking it may not be PoW issue. I have no clue why this is occurring now, been working before this.
my client is seeing the explorer chain and is trying to sync, I'm going to let it sit today, and see if it will rejoin the main chain, without forcing a resync on it. I am now concerned though that at least bittrex is off and they are matching the chain I'm on. I haven't checked any other exchanges. My wallet is on block 89412 as well. This is the first error from the log file: ACCEPTED: proof-of-transaction block at height 89297
ERROR: CheckCoinbaseTx() : calculated coinbase 20000000, desination, or address do not match the actual block 89297
ERROR: Reorganize() : ConnectBlock 00000001644472398fbb failed
InvalidChainFound: invalid block=70720587075f4144af85 height=89390 trust=4081433000283 blocktrust=98011760 date=06/26/14 11:38:13
InvalidChainFound: current best=0000000047e017eecacd height=89412 trust=4067641334773 blocktrust=3 date=06/26/14 14:00:34
ERROR: SetBestChain() : Reorganize failed
ERROR: AcceptBlock() : AddToBlockIndex failed
ERROR: ProcessBlock() : AcceptBlock FAILED
|
|
|
|
Thank you ofeefee for the node list. Now I should be on the right chain. Too bad I have lost 30k coins on the other chain  |
|
|
|
|
Guys I have some problems with my wallet.
Now, It's the 3rd time that I try to sync my wallet and every time I have a different total block number, like the wallet is syncing on different chains. Why?
What should I do? Is my coin safe?
|
|
|
|
|
+5 Kit here.
Shipping abroad?
|
|
|
|
ROUNDING POLICY
For all financial calculations, CEX.IO uses a rounding policy which rounds to the 8th digit after the separator, [b]in the favour of the platform.[/b]
Example:
If you wish to buy 0.1 GHS per 0.0595678678 BTC
The amount of BTC you will be spending is 0.1 * 0.0595678678 = 0.0059567868 BTC
1) The system will take 0.0059567868 and multiply it by 108, making it 595678.68
2) Afterwards the system will pick the minimum integer larger than 595678.68, which is 595679
3) Hence, to buy 0.1 GHS - you will be spending 0.00595679 BTC
If you decide to sell 0.1 GHS per 0.0595678678 BTC
The amount of BTC you will be getting is 0.1 * 0.0595678678 = 0.0059567868 BTC
1) The system will take 0.0059567868 and multiply it by 108, making it 595678.68
2) Afterwards the system will pick the maximum integer smaller than 595678.68, which is 595678
3) Hence, to sell 0.1 GHS - you will be earning 0.00595678 BTC finally.... |
|
|
|
|
Anyone has a copy of the old ToS?
Just to know what they have changed and why (hashfast related?)
|
|
|
|
|
Interested.
I have only a question: When this will start mine? (+ Delivery about 1 week after order payment, is unclear)
|
|
|
|
|
13YUXBJRjrshTMzoaytX5pSrMeccQBevsF
Thank you
|
|
|
|
13YUXBJRjrshTMzoaytX5pSrMeccQBevsF Thank you  |
|
|
|
|
localbitcoins.com well accepted!
|
|
|
|
|
Interested as well. Pm me with details.
Thk.
|
|
|
|
|
DISPLAY NAME: LPA
USER ID: 6364
Thank you so much sir.
|
|
|
|
As the title, I am looking for buying BTC/LTC at btc-e rates.I can pay with paypal (verified acc since years --- good rep on ebay, same account name) or by bank transfer. Only trusted seller or escrow required. Thanks |
|
|
|
|
Hi,
I am trying to setting up my wallet, but can not connect to the network.
I have tried everything but after 2/3 the app lose connection.
What I have to do?
Thk
|
|
|
|
|
