which gen have you put on your mobo ?
virtual memory is fine ?
the drivers are updated ?
your psu is feeding well ?
i'm not the greatest with computers so not exactly sure what you mean by gen, but i think you mean the OS and i'm using simple miner. everything else is fine though.
Hi everyone. Thanks in advance for any help with my issue I’m having.
So my issue: I have a TB350-btc mobo from biostar running SMos that I have been using for a couple weeks to mine Ethereum and slowly adding RX series GPU’s as I find them. Today I got my 4th GPU, so I went back into the mobo bios settings last night to enabled mining mode in preparation for today but was getting all kinds of problems. When SMos tries to apply overclocking from SMos it will always get stuck on one GPU or another until watchdog kicks in and restarts the system. When I disable the overclocking settings it will launch claymore miner V10.6 and run but with 3 GPU’s in it would detect 4 somehow and mine crazy slow. GPU 0 would run at about .5MH/s and the other 3 detected would run around 4 MH/s. I’m guessing that maybe the onboard CPU video might be being detected and was found as GPU 0. I updated to the latest bios for the mobo and still had the same issues so I disabled mining mode and hoped that when I got the 4th GPU today that maybe it would be happy but that still wasn’t the case. Now it is only seeing only the 4 GPU’s with one running at an appropriate hash rate but the other 3 are running at the 4 MH/s speed, and when I try to overclock the cards they will get stuck and crash like before. I got no idea on what the issue is and unfortunately, I haven been able to find much info on these mobo’s anywhere. I appreciate any advice anyone can give.
Pool: ethermine.org
Mobo bios settings:
-enabled 4G decoding
-enabled CSM support (for RX series GPU’s)
-primary video device is still 16x pcie (don’t have anything to pick up DVI port on mobo and when I set this to IGD video I only get black screen with HDMI connected through GPU’s, but planning on getting an DVI to HDMI adapter today and see if that fix’s my issue)
Rig info:
-mobo: TB350-btc
-bios now: B35BG704.BSS (updated when trying to my issues)
-bios before: B35BGB30.BSS
-CPU: AMD A8-9600 Bristol Ridge Quad-Core 3.1 GHz
-PSU: corsair 1000 watt
-ram: 8G DDR4 2400mhz
-3 RX570 4G GPU (haven’t done the bios yet)
-1 RX580 4G GPU (haven’t done the bios yet)
Your Bios seems to be the recommended one.
Disable CSM and see if that wont make it work for you.
i was having issues getting the system to boot simple miner last night with CSM disabled but i'll give it a shot again when i get home tonight.
any other suggestions i can try out tonight are also welcome.