 Show Posts
|
|
Pages: [1]
|
Hi! Sorry for the off topic but I'm out of ideas! At least I'm using phoenix miner!
So, I bought 2x Tplink p100 smart plugs and have set 2x asrock motherboards 1. b450 steel legend, R5 3600 with 1x 1kw PSU, 2. x470 Master Sli R5 1600, 2x PSUs 1kw connected together. So both motherboards set to restore power after power loss, the first mobo starts as it should after switching the smart plug on, BUT the second x470 mobo only starts spinning bot PSUs fans... but nothing starts...no RBGs, no fans running, not even cpu fan, ONLY the 2 PSU fans are running. It only starts working properly after turning the rig on from the classic power button.
Anyone has any suggestion what the problem could be? Once again Im really sorry for the off topic and thanks in advance!
Cheers!
Have you tried swapping the units at the smart plugs? If it follows the rig start there….if it stays at the plug replace it. Then do the same for the psu’s and motherboards until you isolate what is causing the behavior. Thanks for the reply! I found out someone had same problem with Asrock x470 motherboard and resolved it by updating the bios. So I gave it a try and updated from bios version 3.50 to 3.70 and this solved my problem! Now the rig starts when power comes back, but the only problems is that windows shows that message before it enters into windows that the system didn't start up correctly and I should choose restart or actions to restore windows. Its a bit of a bummer again because you cant log on with teamviewer and cant firgure out why the rig isn't booting... |
|
|
|
|
Hi! Sorry for the off topic but I'm out of ideas! At least I'm using phoenix miner!
So, I bought 2x Tplink p100 smart plugs and have set 2x asrock motherboards 1. b450 steel legend, R5 3600 with 1x 1kw PSU, 2. x470 Master Sli R5 1600, 2x PSUs 1kw connected together. So both motherboards set to restore power after power loss, the first mobo starts as it should after switching the smart plug on, BUT the second x470 mobo only starts spinning bot PSUs fans... but nothing starts...no RBGs, no fans running, not even cpu fan, ONLY the 2 PSU fans are running. It only starts working properly after turning the rig on from the classic power button.
Anyone has any suggestion what the problem could be? Once again Im really sorry for the off topic and thanks in advance!
Cheers!
|
|
|
|
anyone having issues with RX 6800??
My 6800 Fighter is constantly fluctuating between 40 and 62mhs, from 100w to 180w, regardless of what settings I input in radeon wattman. But I dont know if its a compatibility issue, since I have all kind of cards in my rig (2x3080, 3070, 5700xt, 1080ti, 6800) and the Fighter is my main card( the one giving signal to the monitor) Anyone else experiencing same issue? Have you tried running them in Afterburner? I think the settings for RX 6000 series can only be applied in wattman... Otherwise I'm using afterburner for all the other cards. |
|
|
|
anyone having issues with RX 6800??
My 6800 Fighter is constantly fluctuating between 40 and 62mhs, from 100w to 180w, regardless of what settings I input in radeon wattman. But I dont know if its a compatibility issue, since I have all kind of cards in my rig (2x3080, 3070, 5700xt, 1080ti, 6800) and the Fighter is my main card( the one giving signal to the monitor) Anyone else experiencing same issue? |
|
|
|
owners of 1080ti whats the max MH without scam ethpill file you ve been getting ?
I have 3 , 1080 Ti cards running 5.4c and 5.5c with -straps 2 and they all get 44-48 mh/s, I would say avg is 46.2 ish Do Not use ETHPill I downloaded from the OP and get trojan. Someone remote desktop into all 3 of my PCs and went though my browser and all saved passwords. Somehow Gmail notified me ( I have no idea why). They even did VNC from my PC into my dad's and went through his stuff too. They were mainly looking for exchange login which I don't have. They tried logging into Bittrex and I have no funds. I only getting 35-36 , with -straps 2 and all, what im doing wrong? can you post your settings? Yeah same with me. Im also getting 35-36 and the straps option isnt helping. Actually I noticed, that the miner reports something like this: In order to set straps you need to run phoenix miner as administrator. But when I try to run the .bat file as administrator the window closes immediately and nothing happens. Is there a solution to this? Thanks! |
|
|
|
|
Could some one pls tell me what command must be entered in the bat file that replaces the pill for ether?
With the pill I have around 10 mh/s increase on my 1080ti, but somewhere was mentioned now there's a command that renders the pill useless.
Im currently getting around 47,7 mh/s on a palit 1080ti Jetstream 85 tdp, 220 core, 330 mem. At very few occasions it jumps to 49 mh/s when I put EXACTLY 200 core/ 230 mem, but if goes back down to 47 whe new dag file loads or smt.
Lowering tdp below 75% or core clocks drives the speed down significantly. Any idea on different settings that can push it to 49?
Thanks!
|
|
|
|
|
Could some one help!? We are not all programmers here and there is no explanation how to use the new wallet 0.12.1.2
I cant uninstall the old wallet and when I open the cerberus-qt.exe file it just lunches the program again. Now I cant see my old balance and God knows what happens to the new coins coming from bsod.pw ? How can I fix this? Is it all lost?
I saved a backup file (.dat) but cant find where to load it. Never used a pc wallet before...
--------------
Disregard, managed to fix it by clicking the reset button in the settings->options tab.
Any way, nothing is properly explained.
|
|
|
|
|
