 Show Posts
|
|
Pages: [1] 2 »
|
I agree, the Sqlite is really slow. Unless you can't speed it up, i'd prefer something easier as well.
My opinion on the card settings:
- Radeon 550, the Baffin is slower on GGS than on xmr-stak. About 8-10%, Where xmr-stak gives a steady 560 H/s @1150/1950, GGS is jumping between 510 and 540. Maybe the algo needs a closer look.
- Memory timings: I posted a elpida strap for cryptonight, before, did someone use it? I managed to squeeze a bit more out of it for the bad memory cards, giving now 920h/s with 1150/1750.
As soon i good some free time i will check the memory timings and hand them over...GGS deserves this support, really.
Maybe this helps.
...on what basis you changed the memory learning part?Uh, i don't really understand what you mean by memory learning part. I couldn't investigate further as GGS memory timings and Bios memory straps don't "fit". This seems to be because of the AMD driver that is dynamically changing memory settings. In other words: The straps/settings you put into a bios mod will neither work nor be shown inevitably in GGS. The values there differ from the straps you put in the Bios mod. |
|
|
|
Hmm, i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver). When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared. 2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before.... 000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8 Does the 550 get better hashrates than the the 560 I have 2 one with micron and the other with hynix I get better rates with the micron but not 530 on cryptonight I have the clocks at 1100/2000 and one click timings but this is on linux I have a stripped down win 10 pro I'm going to reinstall windows on all my miners and install GGS maybe I'll get better rates This is my actual test miner..  If you have Hynix AJR, you can try: 777000000000000022C29C0010DE5B43A0551013B50B8508004006007C0514206A8900A00200312 017112E3688293615 |
|
|
|
Hmm, i don't really understand the memory timings. When i copy the original straps, e.g. (1750 strap and use 1725MHZ ) from the card's bios (in this case Hynix AJR) to the memory timings field, the computer crashes (Thread stuck in device driver). When i let GGS run at 1725MHZ and capture the timings after some time they are different from the original straps (1700: and 1625: and 2000:) written in the bios. This way memory strap optimizing by hand is rather impossible as it can't be compared. 2nd: The 550 with elpida can do easily 530-560H/s at cryptonight, it's just the memory timings. I've posted the settings before and memory timings before.... 000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C 01712262B5C2B3715
2, 44, 8 |
|
|
|
Did some testing today , and saw that monero algo v7 is well optimized it reached 930h , but heavy algo , which by default should be reaching 1000-1050h is only 730h . Samsung memory rx480 . And as far as ovrclock settings and voltage they are not working on blockchain driver , but you already told me about it. but the tool gets in cross with msi afterburner in some way and they crash the system and driver when voltage is tweaked and have to do a system restore , because when system loads after a minute it crashes and freezes. So don`t use msi afterburner!
Well, that's the point. With GGS you don't need any additional software nor bios mods. Not even a registered Windows version. Instability in GGS is caused by either heavy OC/undervolting or inconsistent Bios mods... |
|
|
|
Hey zawawa,
i still can't get phymem running - still getting an error. Changes on memory timings have no effect. Hitting the "print memory timings"-button has no effect either.
It's unmodified cards and 18.3.2-Driver.
Reinstalled GGS, used the standalone one, reinstalled drivers....
btw. The speed out of the box for ajr memory is good. I have 920h/s with 1150/1950.
Any idea?
Sorry, I missed your reply. Can you see PhyMemWrapper.dll in your application folder? It seems like the miner is not properly installed. Hi, yes i can see the file. See attached screenshots. It's asking the source file from D:\github\GatelessGateSharp\GatelessGateSharp\MainForm.cs   My almost non-existent German skills tell me that the system cannot find the DLL. If it is there, it is either broken or incompatible. You are not running the miner on a 32-bit Windows, are you? Ok, it just says Exception: Unable to load DLL "PhyMemWrapper.dll': The specified module was not found. (Exception:from HRESULT: 0x8007007E). Windows is 64bit... I wonder why it asks for something on the not existent "D:\"-Drive. I do not have a "D:\"-Drive installed. The PhyMemwrapper.dll path is written correct into the registry: "C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\PhyMemWrapper.dll". Your Mainform.cs does not have this path specified, and i can't find any path like this in the environment variables nor in the registry. Anyway, it seems i need a clean reinstall of Windows as this has nothing to do with GGS, i think. I just figured out that it doesn't save the custom pool's port either although it is written correctly into the json file. |
|
|
|
Hey zawawa,
i still can't get phymem running - still getting an error. Changes on memory timings have no effect. Hitting the "print memory timings"-button has no effect either.
It's unmodified cards and 18.3.2-Driver.
Reinstalled GGS, used the standalone one, reinstalled drivers....
btw. The speed out of the box for ajr memory is good. I have 920h/s with 1150/1950.
Any idea?
Sorry, I missed your reply. Can you see PhyMemWrapper.dll in your application folder? It seems like the miner is not properly installed. Hi, yes i can see the file. See attached screenshots. It's asking the source file from D:\github\GatelessGateSharp\GatelessGateSharp\MainForm.cs |
|
|
|
|
Hey zawawa,
i still can't get phymem running - still getting an error. Changes on memory timings have no effect. Hitting the "print memory timings"-button has no effect either.
It's unmodified cards and 18.3.2-Driver.
Reinstalled GGS, used the standalone one, reinstalled drivers....
btw. The speed out of the box for ajr memory is good. I have 920h/s with 1150/1950.
Any idea?
|
|
|
|
Ok guys,
whatever strap i'm putting in or whatever i change in the memory timing field, the hashrate does not change, even if i resume ggs or restart the system. OC features work as expected..
It's Win10 and AMD 18.3.2
What am i overlooking or doing wrong?
Did you choose the right device and right algorithm on the "Devices" tab page? Well i think so,    @zawawa I think it is an error with phymem, any idea how to fix it? See:  |
|
|
|
Ok guys,
whatever strap i'm putting in or whatever i change in the memory timing field, the hashrate does not change, even if i resume ggs or restart the system. OC features work as expected..
It's Win10 and AMD 18.3.2
What am i overlooking or doing wrong?
Did you choose the right device and right algorithm on the "Devices" tab page? Well i think so, |
|
|
|
|
Ok guys,
whatever strap i'm putting in or whatever i change in the memory timing field, the hashrate does not change, even if i resume ggs or restart the system. OC features work as expected..
It's Win10 and AMD 18.3.2
What am i overlooking or doing wrong?
|
|
|
|
SRB CN GPU Miner now fastest cryptonight miner. On my RX 580 cards with SRB miner speed is 30-40+ h/s on each card. It's sad (((( I used to GGS, that it's fastest CN miner... Now it's not... For 270X fastest is Claymore 11.3.
What‘s your speed then? |
|
|
|
|
Any chance to sort the GPUs in the same order number as OverdriveNtool does?
Maybe something for the next release.
|
|
|
|
|
I agree, the Sqlite is really slow. Unless you can't speed it up, i'd prefer something easier as well.
My opinion on the card settings:
- Radeon 550, the Baffin is slower on GGS than on xmr-stak. About 8-10%, Where xmr-stak gives a steady 560 H/s @1150/1950, GGS is jumping between 510 and 540. Maybe the algo needs a closer look.
- Memory timings: I posted a elpida strap for cryptonight, before, did someone use it? I managed to squeeze a bit more out of it for the bad memory cards, giving now 920h/s with 1150/1750.
As soon i good some free time i will check the memory timings and hand them over...GGS deserves this support, really.
Maybe this helps.
|
|
|
|
Did not work, it only has 2GB ram....
For RI 58-60 it's need 1,9Gb VRAM Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something. If card used to output image to monitor than Windows use vram. Try low RI from 58 step by 1 and look into speed. Thanks, i know that. I use the internal Intel VGA...But i'll give it a try. |
|
|
|
Did not work, it only has 2GB ram....
For RI 58-60 it's need 1,9Gb VRAM Yes, but it mined with low and jumping speed above 48 only. But i can try again, maybe i missed something. |
|
|
|
|
Did not work, it only has 2GB ram....
|
|
|
|
The 550 is modded or you have just changed the timestraps?
I unlocked it via SRB Polaris 3.3 and modified the straps, it has elpida memory on it. .. But unlocking doesn't change the hashrate. It seems that the algo is not detecting the unlocked ROPs. Additionally i didn't get a 560 ROM running. Try this, but don't expect a perfect strap according to some mystical rules designed while running around naked at full moon. And don't get higher than 2040 MHZ memory. But please report, if it works for you. Would be interesting. 000000000000000022AA1C00AC595A30A0550F142C8CC505006004007C041420CA8980A9020004C01712262B5C2B3715 xmrstak gives a steady 530 h/s. |
|
|
|
|
@R0land
The 550 is about 520 h/s with 1150/2020 @0.816V..
|
|
|
|
Hi, i get the most reliable Hashrate with this: 580: 2 Threads, 128 Rawintensity, 8 Local Worksize 570: 2, 112, 8 550: 2, 44, 8  |
|
|
|
|
