I'm in Slush. East coast.

Thanks for the reply... I wish we did not have conflicting info on the same post.
But, I guess that would only be possible in a perfect world.

How there is not a document that simply states what all the categories are of the S9, what they specifically stand for...and where they should be running for optimization and when there are reaching limits. That would be grand.

Thanks guys for the positive feedback. I appreciate the breakdown, every piece of detail helps with the knowledge base.

I'm concerned about:

 
So, I have a hardline connection to my Xfinity modem to the S9. I get 150Mbps on download and 11Mbps on upload from a wireless connection on 2.4G.
Not sure why I would have connectivity issues??

Are there any logs on the S9 I could post that would show this in more detail to confirm this?

Thanks fellas.

By all means I'm not touching a thing I just would like to be more educated on the hardware and how to monitor it for long term stability and not be reactionary if something were to happen.

Anyhow I will do a bit more searching around. If I find anything worth noting I will plug it in to this thread.

Thanks Raymond.

Is there a link or manual that explains the different categories and what they actually mean or refer to?
What are potential limits for these various categories?

Other then keeping temps in not above the 70s and having all zeros in the ASIC Status I'm pretty green.

full link to image: https://ibb.co/ftNMtb

Hey guys. New to mining so I'm not sure if these very large values are concerning or not.



Not sure if this image will show... it might be "you need to post a bit before you can" situation.

If it is and you cant see the screen shot my most concerning value is DiffA# on Pool 0 shows = 2,748,234,968

Chain 6 HW# is = 8495

Temps for all three chips are as follows = 72 (chain 6 chip), 66, 66
Fan 3 = 4,320
Fan 6 = 5,160

It has been running for 10 days 1 hour.

If someone can help me understand that be great. Thanks.