Show Posts
|
Pages: [1] 2 3 »
|
Идея выплаты в битке вполне неплохая. А дальнейшее расширение алгоритмов планируется, монеро скажем или что-то другое?
|
|
|
I think I saw messages here about the successful launch of srb on v8 on pitcairn, but I could not find it. Install recommended driver first and then try to use the settings that are in this message for tahiti.
Radeon R9 270X 4Gb (Pitcairn) with manual modded bios, Windows 10 x64 Pro, 18.10.1 driver. Gives 500 h/s on v8 with kernel 1, with kernel 2 speed slower. Owners of 580 8Gb please share your settings and wich kernel file you're use? Please, how you use this parametr "kernel" or --cgpukernel 1? And where? Type you config, please...
|
|
|
With payments now all ok, but don't right work sub Today, Last month, Hashes today. Can you fix it?
|
|
|
Hi.
0.32 version working fine on my rig, with 2gb and 4gb card.
But now, with last release have problem.
If force v7 algo is ok, kernel compile and mining normaly
but if try to set algo 0 (auto) or mining Wownero with V8 algo
miner stucking at compile kernel.
Now try with some 4 gb rig.
Tested Wownero V8 mining with srbminer and xmrstack 2.5 working fine.
This with Pitcairn r7 370 2gb card.
Also with 7970&280x cards (
|
|
|
Hi Claymore as i didnt know what you were doing with this miner i have tried several other miners and firstly i find them a lot harder to set up than your miners and secondly i cannot get the same speeds as i do with your miner with your miner i hash at 840 h/s with others it can be as low as 690 h/s so will be really happy if you upgrade your miner to use the new v8 alog will you be doing the cpu version as well as for no fee tbh i would rather you place it back and keep the support up as i dont know your plans and tbh nothing to do with me would like to see you continue with your miners and perhaps a new one if something good comes out i must say many thanks for your miners as ive been using them for prolly 2 years or more i like that they are simple for me to set up and your continued supports of them and they do kick the other miners arses.
You can use my guide, I've updated miners that comes with Monero v8 support https://bitcointalk.org/index.php?topic=2126975.0Here you can find config settings https://mining-bios.eu/guides-and-miners/cryptonight-xmrryoxhvaeon-mining-guides-and-miners-configs/Do any of those miners work with older tahiti and fury cards? SRBMiner
|
|
|
Getting "No available GPUs for mining. Please check your drivers and/or hardware."
Card is an RX 480 4GB. Running W10 ver 1809 and 18.10.1 drivers.
Any ideas?
Re-install amd drivers 18.6.1 after use DDU. All ok.
|
|
|
Warning - No payout 2 days, not responding to mail. Don't use!
|
|
|
Payments stopped 6 hours ago.... ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Is it Skam?
|
|
|
I ran the little test with old rx 370 and hd 7970 cards with version 032q - worse than clay 11.3. 4x370 - 1.4kH, 5x7970 - 2.2kH; in the claymore 1.7kH and 2.4kH. No optimization with old videocards?
|
|
|
No payments, although the balance is above 0.3, check it, please. Wallet - 4BrL51JCc9NGQ71kWhnYoDRffsDZy7m1HUU7MRU4nUMXAHNFBEJhkTZV9HdaL4gfuNBxLPc3BeMkLGa PbF5vWtANQnc5UG3yyiZMm7KA6s
|
|
|
Warning! Devfee - 16.67% !!!
|
|
|
Все бухают что ли? (joke ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Ну в праздники что делать?) Тестить софт?) Ну что все майнеры последней версии? Пора б уже и супер-вещь сделать... Выдает ошибку No pool! при выборе zergpool, после выбора пулов, версия последняя - 2.04
|
|
|
Where can I change the port of the mining for the algorithm in the settings?
|
|
|
3.1, trying to add in x16r to my list and when it starts the miner it's only using 2 of my 6 cards. The GUI detected all 6 cards and I have it set to use all 6 cards. But the raven miner only wants to load 0,1.nothing else.
I confirm this error, however, this error occurs when the miners are first started, if they are stopped and restarted, everything is fine, and it was with earlier versions of 2.5...
|
|
|
How to change the intensity of an algorithm in a separate algorithm? For example only X17 or RVN and automatically apply them?
Edit ccminerAlexis78.ps1 in the Miners folder "x17" = " -i 20 -d $SelGPUCC --api-remote" #X17 Big thank's!
|
|
|
How to change the intensity of an algorithm in a separate algorithm? For example only X17 or RVN and automatically apply them?
|
|
|
This pool ThreeEyed Pool is skam! Above 300 RVN is not send in my wallet few days ago. Don't use it.
|
|
|
No. Vergé (XVG) is disabled in the morning. See forum.
|
|
|
|