Latest posts of: ionutrai

Show Posts
Pages: [1] 2 »

Local / Română (Romanian) / Magazine Online Electronice care accepta Bitcoin

on: March 19, 2014, 01:31:58 PM

Salut! Am nevoie de o informatie. Stie cineva un magazin online de electronice (smartphones, latops, etc.) din Europa care accepta Bitcoin?

Bitcoin / Mining support / Re: AVA0: Reset failed! not an Avalon?

on: February 20, 2014, 02:20:01 PM

Isn't cgminer 3.9.0 the latest version?

Bitcoin / Hardware / Re: Avalon ASIC users thread

on: February 17, 2014, 02:39:06 PM

I have to units with Avalon modules that I am connecting to two Raspberry Pi. I've made the exact same configurations of the two Raspberry Pi but on one of them I get the error below when I am trying to run cgminer like this: cgminer --config /root/cgminer/cgminer/cgminer.conf --lowmem --avalon-options 115200:16:10:12:1400:55 --avalon-cutoff 60 --avalon-auto

Bitcoin / Mining support / Re: AVA0: Reset failed! not an Avalon?

on: February 17, 2014, 02:27:59 PM

If I use a different frequency on cgminer-3.9.0, cgminer --config /root/cgminer/cgminer/cgminer.conf --lowmem --avalon-options 115200:16:10:12:1400:55 --avalon-cutoff 60 --avalon-auto , here is what I get:

Bitcoin / Mining support / AVA0: Reset failed! not an Avalon?

on: January 30, 2014, 03:42:16 PM

Please help me with this error that I am getting on cgMiner with an Avalon 200GH/s.

Code:

 [2014-01-30 15:39:07] Started cgminer 3.8.5
 [2014-01-30 15:39:07] Loaded configuration file /root/cgminer-3.8.5/cgminer.conf
 [2014-01-30 15:39:08] AVA0: Reset failed! not an Avalon? (0: 20 aa 55 aa)
 [2014-01-30 15:39:08] AVA0: Idling 16 miners
 [2014-01-30 15:39:08] Probing for an alive pool
 [2014-01-30 15:39:09] Pool 0 difficulty changed to 16
 [2014-01-30 15:39:09] Network diff set to 2.19G
 [2014-01-30 15:39:14] API running in IP access mode on port 4028 (11)
 [2014-01-30 15:39:25] AVA0: Result return rate low, resetting!
 [2014-01-30 15:39:26] AVA0 reset sequence sent
 [2014-01-30 15:39:26] AVA0: Idling 14 miners
 [2014-01-30 15:39:30] Shutdown signal received.
 [2014-01-30 15:39:32]
Summary of runtime statistics:

 [2014-01-30 15:39:32] Started at [2014-01-30 15:39:09]
 [2014-01-30 15:39:32] Pool: http://uk1.ghash.io:3333
 [2014-01-30 15:39:32] Runtime: 0 hrs : 0 mins : 22 secs
 [2014-01-30 15:39:32] Average hashrate: 0.0 Kilohash/s
 [2014-01-30 15:39:32] Solved blocks: 0
 [2014-01-30 15:39:32] Best share difficulty: 0
 [2014-01-30 15:39:32] Share submissions: 0
 [2014-01-30 15:39:32] Accepted shares: 0
 [2014-01-30 15:39:32] Rejected shares: 0
 [2014-01-30 15:39:32] Accepted difficulty shares: 0
 [2014-01-30 15:39:32] Rejected difficulty shares: 0
 [2014-01-30 15:39:32] Hardware errors: 71
 [2014-01-30 15:39:32] Utility (accepted shares / min): 0.00/min
 [2014-01-30 15:39:32] Work Utility (diff1 shares solved / min): 0.00/min

 [2014-01-30 15:39:32] Stale submissions discarded due to new blocks: 0
 [2014-01-30 15:39:32] Unable to get work from server occasions: 0
 [2014-01-30 15:39:32] Work items generated locally: 213
 [2014-01-30 15:39:32] Submitting work remotely delay occasions: 0
 [2014-01-30 15:39:32] New blocks detected on network: 1

 [2014-01-30 15:39:32] Summary of per device statistics:

 [2014-01-30 15:39:32] AVA0                | (5s):0.000 (avg):0.000h/s | A:0 R:0 HW:71 WU:0.0/m
 [2014-01-30 15:39:32]

I am starting cgminer with this command:

Code:

cgminer --config /root/cgminer-3.8.5/cgminer.conf --lowmem --avalon-options 115200:16:10:45:330:55 --avalon-cutoff 90 --avalon-auto 2>/tmp/cgminer.log

Bitcoin / Mining support / Re: Running 200GH/s Avalon via a computer

on: January 30, 2014, 03:17:58 PM

I run this command when the Avalon is connected to my PC:

Code:

cgminer -o uk1.ghash.io:3333 -O x.x:x -D --verbose --avalon-options 115200:16:10:45:1024:55 --api-allow "W:127.0.0.1" --api-listen

But I get this error:

Code:


AVA0: Reset failed! not an Avalon? 

[2014-01-30 13:41:59] Started cgminer 3.8.5
 [2014-01-30 13:41:59] USB scan devices: checking for AVA devices
 [2014-01-30 13:41:59] RES: thread starting
 [2014-01-30 13:42:00] AVA looking for and found BTB 0403:6001
 [2014-01-30 13:42:00] USB lock avalon 1-6
 [2014-01-30 13:42:00] RES: avalon (1:6) lock=1
 [2014-01-30 13:42:00] USB res lock avalon 1-6
 [2014-01-30 13:42:00] RES: avalon (1:6) lock ok=1
 [2014-01-30 13:42:00] USB init, iManufacturer mismatch - BTB device 1:6
 [2014-01-30 13:42:00] Found FTDI vs Burnin Electronics
 [2014-01-30 13:42:00] USB free BTB
 [2014-01-30 13:42:00] USB init, iManufacturer mismatch - BBF device 1:6
 [2014-01-30 13:42:00] Found FTDI vs Burnin Electronics
 [2014-01-30 13:42:00] USB free BBF
 [2014-01-30 13:42:00] USB init - AVA device 1:6 usbver=0200 prod='FT232R USB UART' manuf='FTDI' serial='A801XEE2'
 [2014-01-30 13:42:00] AVA0: reset got err 0
 [2014-01-30 13:42:00] AVA0: latency got err 0
 [2014-01-30 13:42:00] AVA0: data got err 0
 [2014-01-30 13:42:00] AVA0: setbaud got err 0
 [2014-01-30 13:42:00] AVA0: setmodemctrl got err 0
 [2014-01-30 13:42:00] AVA0: setflowctrl got err 0
 [2014-01-30 13:42:00] AVA0: setmodemctrl 2 got err 0
 [2014-01-30 13:42:00] AVA0: setflowctrl 2 got err 0
 [2014-01-30 13:42:00] Avalon: Sent(1):
 [2014-01-30 13:42:00] 00000000   ad                                               |.               |
 [2014-01-30 13:42:00] AVA0: usb_write got err 0
 [2014-01-30 13:42:00] AVA0: Get avalon read got err 0
 [2014-01-30 13:42:00] AVA0 reset: get:
 [2014-01-30 13:42:00] 00000000   aa 55 aa 55 00 00 00 00  d0 1f 69 01 70 94 06 00 |.U.U......i.p...|
 [2014-01-30 13:42:00] 00000010   d0 1f 69 01 34 9a 06 00  d0 9a 06 00 80 43 69 01 |..i.4........Ci.|
 [2014-01-30 13:42:00] 00000020   80 43 69 01 00 cc f2 b6  00 00 00 00 01 00 00 00 |.Ci.............|
 [2014-01-30 13:42:00] 00000030   70 94 06 00 d0 1f 69 01  d0 9a 06 00 38 52 02 00 |p.....i.....8R..|
 [2014-01-30 13:42:00] AVA0: Reset failed! not an Avalon? (8: aa 55 aa 55)
 [2014-01-30 13:42:00] Avalon: Sent(96):
 [2014-01-30 13:42:00] 00000000   ac 20 2d 10 0b 00 40 1f  74 01 00 00 00 00 00 00 |. -...@.t.......|
 [2014-01-30 13:42:00] 00000010   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000020   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000030   00 00 00 00 00 00 00 00  00 00 00 00 99 99 99 19 |................|
 [2014-01-30 13:42:00] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2014-01-30 13:42:00] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2014-01-30 13:42:00] AVA0: usb_write got err 0
 [2014-01-30 13:42:00] Avalon: Sent(96):
 [2014-01-30 13:42:00] 00000000   a4 20 2d 10 0b 00 40 1f  74 01 00 00 00 00 00 00 |. -...@.t.......|
 [2014-01-30 13:42:00] 00000010   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000020   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000030   00 00 00 00 00 00 00 00  00 00 00 00 99 99 99 19 |................|
 [2014-01-30 13:42:00] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2014-01-30 13:42:00] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2014-01-30 13:42:00] AVA0: usb_write got err 0

Bitcoin / Hardware / Re: Official Avalon Technical Support Thread

on: January 30, 2014, 02:38:38 PM

Quote from: Xer0 on January 30, 2014, 01:30:05 PM what are the --avalon-options for the 55nm 220GH? --avalon-options 115200:16:10:45:1400:55

Bitcoin / Hardware / Re: Official Avalon Technical Support Thread

on: January 30, 2014, 01:45:07 PM

Quote from: ionutrai on January 30, 2014, 01:00:39 PM

I am trying to connect my Avalon Controller to my Raspberry Pi (raplacing the TP-Link module with an Raspberry Pi)

When I use:

Code:

cgminer -o uk1.ghash.io:3333 -O x.x:x -D --verbose --avalon-options 115200:16:10:45:1024:55 --api-allow "W:127.0.0.1" --api-listen

I get an error like:

Code:

AVA0: Get avalon read got err 0

Someone can help me with this?

Here is my cgminer log too:

Code:

 [2014-01-30 13:41:59] Started cgminer 3.8.5
 [2014-01-30 13:41:59] USB scan devices: checking for AVA devices
 [2014-01-30 13:41:59] RES: thread starting
 [2014-01-30 13:42:00] AVA looking for and found BTB 0403:6001
 [2014-01-30 13:42:00] USB lock avalon 1-6
 [2014-01-30 13:42:00] RES: avalon (1:6) lock=1
 [2014-01-30 13:42:00] USB res lock avalon 1-6
 [2014-01-30 13:42:00] RES: avalon (1:6) lock ok=1
 [2014-01-30 13:42:00] USB init, iManufacturer mismatch - BTB device 1:6
 [2014-01-30 13:42:00] Found FTDI vs Burnin Electronics
 [2014-01-30 13:42:00] USB free BTB
 [2014-01-30 13:42:00] USB init, iManufacturer mismatch - BBF device 1:6
 [2014-01-30 13:42:00] Found FTDI vs Burnin Electronics
 [2014-01-30 13:42:00] USB free BBF
 [2014-01-30 13:42:00] USB init - AVA device 1:6 usbver=0200 prod='FT232R USB UART' manuf='FTDI' serial='A801XEE2'
 [2014-01-30 13:42:00] AVA0: reset got err 0
 [2014-01-30 13:42:00] AVA0: latency got err 0
 [2014-01-30 13:42:00] AVA0: data got err 0
 [2014-01-30 13:42:00] AVA0: setbaud got err 0
 [2014-01-30 13:42:00] AVA0: setmodemctrl got err 0
 [2014-01-30 13:42:00] AVA0: setflowctrl got err 0
 [2014-01-30 13:42:00] AVA0: setmodemctrl 2 got err 0
 [2014-01-30 13:42:00] AVA0: setflowctrl 2 got err 0
 [2014-01-30 13:42:00] Avalon: Sent(1):
 [2014-01-30 13:42:00] 00000000   ad                                               |.               |
 [2014-01-30 13:42:00] AVA0: usb_write got err 0
 [2014-01-30 13:42:00] AVA0: Get avalon read got err 0
 [2014-01-30 13:42:00] AVA0 reset: get:
 [2014-01-30 13:42:00] 00000000   aa 55 aa 55 00 00 00 00  d0 1f 69 01 70 94 06 00 |.U.U......i.p...|
 [2014-01-30 13:42:00] 00000010   d0 1f 69 01 34 9a 06 00  d0 9a 06 00 80 43 69 01 |..i.4........Ci.|
 [2014-01-30 13:42:00] 00000020   80 43 69 01 00 cc f2 b6  00 00 00 00 01 00 00 00 |.Ci.............|
 [2014-01-30 13:42:00] 00000030   70 94 06 00 d0 1f 69 01  d0 9a 06 00 38 52 02 00 |p.....i.....8R..|
 [2014-01-30 13:42:00] AVA0: Reset failed! not an Avalon? (8: aa 55 aa 55)
 [2014-01-30 13:42:00] Avalon: Sent(96):
 [2014-01-30 13:42:00] 00000000   ac 20 2d 10 0b 00 40 1f  74 01 00 00 00 00 00 00 |. -...@.t.......|
 [2014-01-30 13:42:00] 00000010   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000020   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000030   00 00 00 00 00 00 00 00  00 00 00 00 99 99 99 19 |................|
 [2014-01-30 13:42:00] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2014-01-30 13:42:00] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2014-01-30 13:42:00] AVA0: usb_write got err 0
 [2014-01-30 13:42:00] Avalon: Sent(96):
 [2014-01-30 13:42:00] 00000000   a4 20 2d 10 0b 00 40 1f  74 01 00 00 00 00 00 00 |. -...@.t.......|
 [2014-01-30 13:42:00] 00000010   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000020   00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 |................|
 [2014-01-30 13:42:00] 00000030   00 00 00 00 00 00 00 00  00 00 00 00 99 99 99 19 |................|
 [2014-01-30 13:42:00] 00000040   32 33 33 33 cb cc cc 4c  64 66 66 66 fd ff ff 7f |2333...Ldfff....|
 [2014-01-30 13:42:00] 00000050   96 99 99 99 2f 33 33 b3  c8 cc cc cc 61 66 66 e6 |..../33.....aff.|
 [2014-01-30 13:42:00] AVA0: usb_write got err 0

Bitcoin / Hardware / Re: Official Avalon Technical Support Thread

on: January 30, 2014, 01:00:39 PM

I am trying to connect my Avalon Controller to my Raspberry Pi (raplacing the TP-Link module with an Raspberry Pi) When I use: Code: cgminer -o uk1.ghash.io:3333 -O x.x:x -D --verbose --avalon-options 115200:16:10:45:1024:55 --api-allow "W:127.0.0.1" --api-listen I get an error like: Code: AVA0: Get avalon read got err 0 Someone can help me with this?

Bitcoin / Hardware / Re: Avalon ASIC users thread

on: January 29, 2014, 02:42:42 PM

I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode... What is wrong?

Cgminer API Log

Code:

[Firmware Version] => 20131229
cgminer: 698d677
cgminer-openwrt-packages: 54d7569
luci: 346e3e7
Socket connect failed: Connection refused

SSH Error

Code:

root@OpenWrt:~# /etc/init.d/cgminer start
ntpd: bad address '3.openwrt.pool.ntp.org'
ntpd: could not resolve peer 3.openwrt.pool.ntp.org, skipping
ntpd: bad address '2.openwrt.pool.ntp.org'
ntpd: could not resolve peer 2.openwrt.pool.ntp.org, skipping

Bitcoin / Hardware / Re: [ANN] Technobit HEX16A2 - 16 chip Avalon Gen2 board

on: January 29, 2014, 02:36:35 PM

Can someone help set my 5 x HEX16A2 on Raspberry Pi? I am currently running MinePeon but I am willing to change the OS if needed...

Bitcoin / Hardware / Re: Avalon ASIC users thread

on: January 28, 2014, 07:49:05 PM

Another question. Can I replace the TPLink module with a Raspberry Pi?

Bitcoin / Hardware / Re: Avalon ASIC users thread

on: January 28, 2014, 07:11:39 PM

I am using an Avalon 2nd Gen and in the admin panel, when I try to save cgminer settings it remains in loading mode...

Bitcoin / Hardware / Re: Avalon2 based miner from Technobit - HEX16A2

on: January 28, 2014, 05:42:29 PM

Can someone help me with a tutorial on how to run 5 x HEX16A2 on Raspberry PI with MinePeon installed?

Local / Market / [VAND] 1 x Butterfly Labs 50GHs+ si 3 x HEX16A2 24GHs+

on: January 24, 2014, 08:56:43 AM

Vand 1 Butterfly Labs 50GHs+ cu sursa 750w si raspberry pi, card sd cu minepeon. (STAND ALONE) si 3 x HEX16A2 24GHs+ BFL 50GHS (pachet complet) - Pret: 1.5 BTC HEX16A2 24GHS - Pret 0.7 BTC / buc (am 3 buc) Accept si transfer bancar Multumesc pentru vizualizarea anuntului! Pentru alte detalii please PM Trimit oriunde in tara din BC

Bitcoin / Hardware / Re: [ANN] Technobit HEX8A1 - 6/8 chip Coincraft A1 board

on: December 18, 2013, 10:50:24 PM

Super marto! I'm sure that this will be great, I'm following this! Keep it up! Off the record: Can you please tell me if XKFXDUWPV will be shipped till end of december? Thank You!

Local / Presa / Re: Primul exchange din Romania

on: December 11, 2013, 09:06:20 PM

Multa bafta! Succes!

Local / Bine ai venit! / Re: Salutare

on: December 11, 2013, 12:38:44 PM

SHUPERbafta la minat! Bine ai venit!

Local / Offtopic / Re: Cu cat va incheia BTC anul 2013?

on: December 11, 2013, 12:31:09 PM

Si eu sper...nu sunt pesimist de fel, dar nu cred ca va ajunge, anul acesta binenteles

Local / Offtopic / Cu cat va incheia BTC anul 2013?

on: December 08, 2013, 06:56:25 PM

Cu cat va incheia BTC anul 2013?

Pages: [1] 2 »