Latest posts of: vladutz1186

Show Posts
Pages: [1] 2 »

Local / Market / Cumpar RX580/570 DEFECTE !!!

on: February 12, 2021, 11:13:36 PM

Cumpar RX580/570 defecte ! Placile trebuie sa fie complete, fara nimic lipsa la ele ! Sapphire Nitro 8Gb ( exclus Pulse ) XFX ( cele cu coolerele negre ) *Gigabyte

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: January 18, 2021, 08:29:38 PM

GTX Titan X still work ? I can`t get more than 2.6 mh/s I try more miners, two OS Ethos and HiveOS, few new and old drivers .. nothing changed !

Bitcoin / Bitcoin Discussion / Re: May 7th, 2140

on: January 14, 2021, 11:45:49 PM

in 2140 everyone alive at this point died in that year. [/quote] RIP !

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ won`t boot !

on: January 11, 2021, 08:50:49 PM

Solved. I need to set in BIOS to use only one core from CPU, and works fine .. strange MB ! CPU : G3930

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ 13 GPU Board

on: January 11, 2021, 08:48:59 PM

I just fix it. I need to set in BIOS to use only one core from CPU, and works fine .. strange ! CPU : G3930

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ won`t boot !

on: January 09, 2021, 11:33:03 PM

Quote from: miner29 on January 09, 2021, 11:06:18 PM What processor is installed on mobo? And for ethos it should be igpu diasbled. See knowledge base. Celelron g3930 . I`ll try with igpu disabled, but I think I tried before

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ 13 GPU Board

on: January 09, 2021, 09:04:19 PM

Quote from: Permonik on January 09, 2021, 08:19:53 PM Worst mobo ever... yeah

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ won`t boot !

on: January 09, 2021, 06:32:03 PM

Quote from: jgonzi on January 09, 2021, 06:20:29 PM Quote from: vladutz1186 on January 09, 2021, 03:37:57 PM I just replace my old Biostar TB250-BTC Pro with Asrock H110 Pro BTC+ and I have a problem. After display Asrock logo, I see only one " - " in upper left corner and system won`t boot OS tested : Ethos and HiveOS Boot : from USB ( i also try to boot from SSD ) VGA : Onbord ( and with onboard disabled and 1 or 6-9 GPU`s in PCI-E slots, same problem ) Bios : Updated to last version The MB is connected with 2 molex + 1 sata from the same PSU I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ... Thanks and I`m waiting some advices 4G Enable? Yeah ! Problem is : only with onboard gpu won`t start OS So that`s strange ... I see only problems with this Asrock MB, on more forums ... but, after I receive it

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ won`t boot !

on: January 09, 2021, 06:15:30 PM

Quote from: JeotQ on January 09, 2021, 05:07:07 PM Do you have CMOS battery installed? Also is the CMOS pin in the right place? This is the next thing I would look into if I can't get it to work, if that is the case after checking the CMOS pin then the motherboard is faulty, you may have to return the motherboard Yeah, CMOS battery already changed, jumper for clear it`s in the right place !

Alternate cryptocurrencies / Mining (Altcoins) / ASrock H110 Pro BTC+ won`t boot !

on: January 09, 2021, 03:37:57 PM

I just replace my old Biostar TB250-BTC Pro with Asrock H110 Pro BTC+ and I have a problem. After display Asrock logo, I see only one " - " in upper left corner and system won`t boot OS tested : Ethos and HiveOS Boot : from USB ( i also try to boot from SSD ) VGA : Onbord ( and with onboard disabled and 1 or 6-9 GPU`s in PCI-E slots, same problem ) Bios : Updated to last version The MB is connected with 2 molex + 1 sata from the same PSU I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ... Thanks and I`m waiting some advices

Alternate cryptocurrencies / Mining (Altcoins) / Re: ASrock H110 Pro BTC+ 13 GPU Board

on: January 09, 2021, 03:34:53 PM

Hello. I just replace my old Biostar TB250-BTC Pro with Asrock H110 Pro BTC+ and I have a problem. System won`t boot ... after display Asrock logo, I see only one " - " in upper left corner OS tested : Ethos and HiveOS Boot : from USB ( i also try to boot from SSD ) VGA : Onbord ( and with 1 or 12 gpus, same problem ) The MB is connected with 2 molex + 1 sata from the same PSU I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ... Thanks and I`m waiting some advices

Alternate cryptocurrencies / Mining (Altcoins) / Re: AsRock H110 Pro BTC+ with 12 Asus TUF3 RX 5700 XT anybody help me?

on: January 09, 2021, 03:31:20 PM

Hello. I just replace my old Biostar TB250-BTC Pro with Asrock H110 Pro BTC+ and I have a problem. System won`t boot ... after display Asrock logo, I see only one " - " in upper left corner OS tested : Ethos and HiveOS Boot : from USB ( i also try to boot from SSD ) VGA : Onbord ( and with 1 or 12 gpus, same problem ) The MB is connected with 2 molex + 1 sata from the same PSU I made test with same USB in other rig and works fine, also all GPU`s/risers works without problems ... so problem is from MB. One hour tested diffrent BIOS settings without success ... Thanks and I`m waiting some advices

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: December 18, 2020, 04:12:42 PM

Quote from: forato on December 18, 2020, 03:57:22 PM Quote from: vladutz1186 on December 18, 2020, 03:17:47 PM I have problem with PheonixMiner OC in Ethos ... phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875 GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W In ethos stats I have this ... default_core: 1340 1340 1340 1340 1340 1340 default_mem: 1750 2000 1750 1750 2000 2000 vramsize: 8 8 8 8 8 8 core: 1340 1340 1340 1340 1340 1340 mem: 1750 2000 1750 1750 2000 2000 So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ... On ETHOS try to go to config (home/ETHOS/local.conf) And set: cor 1150 1150 1150 1150 1150 1150 mem 2100 2100 2100 2100 2100 2100 I know about local.conf ... I`m using ethos from 3 yrs, but with ethminer Now it`s fine, after reboot ! Hope this OC will work, and no crashes cor f9d411 1230 1257 1230 1230 1257 1257 mem f9d411 2100 2100 2100 2100 2100 2100 dpm f9d411 5 5 5 5 5 5 vlt f9d411 975 975 975 975 975 975 GPUs: 1: 30.324 MH/s (3) 2: 30.230 MH/s (1) 3: 30.318 MH/s (1) 4: 30.329 MH/s (4) 5: 30.234 MH/s (1) 6: 30.229 MH/s (3) GPU1: 39C 89% 102W, GPU2: 51C 89% 85W, GPU3: 42C 89% 102W, GPU4: 42C 89% 101W, GPU5: 51C 89% 89W, GPU6: 50C 89% 84W GPUs power: 563.0 W Eth speed: 181.664 MH/s, shares: 13/0/0, time: 0:15

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: December 18, 2020, 03:55:00 PM

Quote from: vladutz1186 on December 18, 2020, 03:17:47 PM I have problem with PheonixMiner OC in Ethos ... phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875 GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W In ethos stats I have this ... default_core: 1340 1340 1340 1340 1340 1340 default_mem: 1750 2000 1750 1750 2000 2000 vramsize: 8 8 8 8 8 8 core: 1340 1340 1340 1340 1340 1340 mem: 1750 2000 1750 1750 2000 2000 So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ... Solved , restart is required in Ethos after OC

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: December 18, 2020, 03:17:47 PM

I have problem with PheonixMiner OC in Ethos ... phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875 GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV) GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV) GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV) GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W In ethos stats I have this ... default_core: 1340 1340 1340 1340 1340 1340 default_mem: 1750 2000 1750 1750 2000 2000 vramsize: 8 8 8 8 8 8 core: 1340 1340 1340 1340 1340 1340 mem: 1750 2000 1750 1750 2000 2000 So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ...

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: minero Etereum/Ethash más rápido con devfee más bajo (Win/Linux)

on: December 07, 2020, 09:37:16 PM

Quote from: miner29 on December 07, 2020, 09:16:19 PM Quote from: vladutz1186 on December 07, 2020, 08:44:35 PM Quote from: Kiawpqe on December 07, 2020, 03:24:45 PM Quote from: vladutz1186 on December 07, 2020, 02:58:34 PM Quote from: miner29 on December 07, 2020, 02:15:44 PM SHORTENED you: but I dont know how to disable auto-tune = -gt 0 Yeah, on win it`s easy I don`t know if I can use "flags -gt 0" will disable auto-tune ! I`ll try tomorrow You are using miner-manager https://github.com/cynixx3/third-party-miner-installer-for-ethos to install phoenixminer and get it to properly show up in panel / etc. Ive not seen any ill effect to auto-tune but you can use flags easy enough in your local config (or if using remote config change there for the rig) after you have installed miner-manager with the command lines from near the bottom of the page (2 lines to execute) You will do : miner-manager phoenixminer install once install of miner is complete edit your local.conf globalminer phoenixminer phoenixminer=flags -gt 0 So for phoenixminer i have this set. --->. phoenixminer=flags -mode 1 -proto 3 -wdtimeout 300 Let me know if that solves it for you Thanks for your help. I`ll try tomorrow, like i said, with flags

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: minero Etereum/Ethash más rápido con devfee más bajo (Win/Linux)

on: December 07, 2020, 08:44:35 PM

Quote from: Kiawpqe on December 07, 2020, 03:24:45 PM Quote from: vladutz1186 on December 07, 2020, 02:58:34 PM Quote from: miner29 on December 07, 2020, 02:15:44 PM Quote from: vladutz1186 on December 07, 2020, 11:57:42 AM Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings ! I don`t use ./phoenixminer to start miner ... I use only local.conf file globalminer phoenixminer stratumproxy enabled proxywallet 0xf1396cbxxxxxxxxxx proxypool1 eth.2miners.com:2020 poolpass1 x And OC strings are good ? cor xxxx xxxx mem xxxx xxxx dpm xxxx xxxx cor (rig id) oc oc oc oc with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor) oc = core you want for 570/580 1150 is a good start same with mem (rig id) and the oc for each card seperated by space. i would start with say 2100 for 570/580. Dpm isnt really used but set it to 5 for each card also vlt (rig id) 851 851 875 for vlt settings above = 0.851v hope it helps. Thanks for your answer ! I know about rig ID, etc and how to OC in Ethos... but I dont know how to disable auto-tune . I ask that because Ethos don`t come with Phoenixminer had to be implemented. Miner work fine but I don`t like auto-tune because I have low hashrate ( with auto-tune ) . GPU1: 32C 89% 100W, GPU2: 46C 89% 92W, GPU3: 32C 89% 95W, GPU4: 33C 89% 95W, GPU5: 50C 89% 103W, GPU6: 46C 89% 94W GPUs power: 579.0 W Eth speed: 160.406 MH/s, shares: 1786/0/0, time: 27:43 GPUs: 1: 24.989 MH/s (267) 2: 28.482 MH/s (304) 3: 24.987 MH/s (305) 4: 24.990 MH/s (271) 5: 28.479 MH/s (344) 6: 28.479 MH/s (295) models: 01 Ellesmere RX 570 113-2E366AU-X5T Micron 03 Ellesmere RX 580 xxx-xxx-xxx SK Hynix 04 Ellesmere RX 570 113-2E366AU-X5T Micron 05 Ellesmere RX 570 113-2E366AU-X5T Micron 06 Ellesmere RX 580 xxx-xxx-xxx SK Hynix 07 Ellesmere RX 580 xxx-xxx-xxx SK Hynix core: 1168 1257 1168 1168 1257 1257 mem: 1750 2000 1750 1750 2000 2000 voltage: 0.992 1.049 0.968 0.965 1.100 1.068 Win 10 -rmode 1 -rvram -1 -tt 57,61,61,62,57,57,61 -eres 100 -proto 2 -cdm 0 -hstats 2 -astats 1 -amd -acm -wdog 1 -log 0 -gpow 100,100,100,100,100,100,100 -coin eth -clf 2 -clNew 1 -clgreen 1 -clKernel 1 -minRigSpeed 180 -prate 0.14 -gpus 1,2,3,4,5,6,7 -cclock 1190,1190,1190,1190,1190,1190,1190 -cvddc 845,865,865,865,845,845,865 -mclock 2110,2110,2110,2112,2112,2112,2110 -mvddc 865,885,885,885,865,865,885 -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx #-dpool blake2s.eu.nicehash.com:3361 #-dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxx #-dcoin blake2s -mt 0 * 0:17 * 12/7 16:19 ************************************** Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 0:17 Eth: Accepted shares 51 (0 stales), rejected shares 0 (0 stales) Eth: Incorrect shares 0 (0.00%), est. stales percentage 0.00% Eth: Maximum difficulty of found share: 210.7 GH (!) Eth: Average speed (5 min): 219.726 MH/s Eth: Effective speed: 196.53 MH/s; at pool: 196.53 MH/s Eth: Estimated income: 8.35 USD/day Eth: New job #4f6267b4 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: New job #7db76626 from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth speed: 219.517 MH/s, shares: 51/0/0, time: 0:17 GPUs: 1: 32.080 MH/s (4) 2: 32.210 MH/s (13) 3: 32.210 MH/s (5) 4: 26.654 MH/s (3) 5: 32.079 MH/s ( 6: 32.074 MH/s (9) 7: 32.210 MH/s (9) Eth: New job #c2f7096c from ssl://eu1.ethermine.org:5555; diff: 4000MH Eth: GPU5: ETH share found! Eth: Share actual difficulty: 7631 MH Eth: Share accepted in 24 ms Eth speed: 220.413 MH/s, shares: 52/0/0, time: 0:17 GPUs: 1: 32.180 MH/s (4) 2: 32.362 MH/s (13) 3: 32.337 MH/s (5) 4: 26.785 MH/s (3) 5: 32.187 MH/s (9) 6: 32.201 MH/s (9) 7: 32.362 MH/s (9) Eth: GPU3: ETH share found! Eth: Share actual difficulty: 4951 MH Eth: Share accepted in 24 ms Eth: New job #b5563f4b from ssl://eu1.ethermine.org:5555; diff: 4000MH GPU1: 57C 39% 83W, GPU2: 61C 44% 96W, GPU3: 61C 46% 90W, GPU4: 62C 55% 84W, GPU5: 57C 36% 84W, GPU6: 57C 39% 82W, GPU7: 61C 48% 94W GPU1: cclock 1190 MHz, cvddc 868 mV, mclock 2110 MHz MSI RX 580 8gb GPU2: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz XFX 580 8GB GPU3: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz XFX 580 8GB GPU4: cclock 1190 MHz, cvddc 887 mV, mclock 2112 MHz POWER-COLOR RX-580 8gb GPU5: cclock 1190 MHz, cvddc 868 mV, mclock 2112 MHz MSI RX 580 8gb GPU6: cclock 1190 MHz, cvddc 868 mV, mclock 2112 MHz MSI RX 580 8gb GPU7: cclock 1190 MHz, cvddc 887 mV, mclock 2110 MHz XFX 580 8GB GPUs power: 612.7 W; cost: 2.06 USD/day 3 x Msi rx 580 8gb=32,7mh/s BIOSMOD 3 x xfx 580 8gb=32,5mh/s NO BIOSMOD (DUAL BIOS W/ MINING BIOS stock) 1 Powercolor 580 8gb 26mh/s (w/ monitor) NO BIOSMOD GPUs power: 612.7 W you: but I dont know how to disable auto-tune = -gt 0 Yeah, on win it`s easy I don`t know if I can use "flags -gt 0" will disable auto-tune ! I`ll try tomorrow

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: December 07, 2020, 02:58:34 PM

Quote from: miner29 on December 07, 2020, 02:15:44 PM Quote from: vladutz1186 on December 07, 2020, 11:57:42 AM Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings ! I don`t use ./phoenixminer to start miner ... I use only local.conf file globalminer phoenixminer stratumproxy enabled proxywallet 0xf1396cbxxxxxxxxxx proxypool1 eth.2miners.com:2020 poolpass1 x And OC strings are good ? cor xxxx xxxx mem xxxx xxxx dpm xxxx xxxx cor (rig id) oc oc oc oc with rig id = 6 digit hexidecimal number of rig (get either from rig or from web page monitor) oc = core you want for 570/580 1150 is a good start same with mem (rig id) and the oc for each card seperated by space. i would start with say 2100 for 570/580. Dpm isnt really used but set it to 5 for each card also vlt (rig id) 851 851 875 for vlt settings above = 0.851v hope it helps. Thanks for your answer ! I know about rig ID, etc and how to OC in Ethos... but I dont know how to disable auto-tune . I ask that because Ethos don`t come with Phoenixminer had to be implemented. Miner work fine but I don`t like auto-tune because I have low hashrate ( with auto-tune ) . GPU1: 32C 89% 100W, GPU2: 46C 89% 92W, GPU3: 32C 89% 95W, GPU4: 33C 89% 95W, GPU5: 50C 89% 103W, GPU6: 46C 89% 94W GPUs power: 579.0 W Eth speed: 160.406 MH/s, shares: 1786/0/0, time: 27:43 GPUs: 1: 24.989 MH/s (267) 2: 28.482 MH/s (304) 3: 24.987 MH/s (305) 4: 24.990 MH/s (271) 5: 28.479 MH/s (344) 6: 28.479 MH/s (295) models: 01 Ellesmere RX 570 113-2E366AU-X5T Micron 03 Ellesmere RX 580 xxx-xxx-xxx SK Hynix 04 Ellesmere RX 570 113-2E366AU-X5T Micron 05 Ellesmere RX 570 113-2E366AU-X5T Micron 06 Ellesmere RX 580 xxx-xxx-xxx SK Hynix 07 Ellesmere RX 580 xxx-xxx-xxx SK Hynix core: 1168 1257 1168 1168 1257 1257 mem: 1750 2000 1750 1750 2000 2000 voltage: 0.992 1.049 0.968 0.965 1.100 1.068

Alternate cryptocurrencies / Mining (Altcoins) / Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

on: December 07, 2020, 11:57:42 AM

Hello. How can I set OC in Ethos ? I want to disable auto-tune and set my own OC settings ! I don`t use ./phoenixminer to start miner ... I use only local.conf file globalminer phoenixminer stratumproxy enabled proxywallet 0xf1396cbxxxxxxxxxx proxypool1 eth.2miners.com:2020 poolpass1 x And OC strings are good ? cor xxxx xxxx mem xxxx xxxx dpm xxxx xxxx

Economy / Scam Accusations / Re: ExtStock exchange - fake volume, fake buy/sell orders

on: October 25, 2020, 09:38:51 AM

Hello, any news about extstock ? I have 24 ETH in my account and I can`t withdraw Fortunately i only deposited 0.2ETH ... so, anybody know one way to transfer fund from this enchange to my wallet ? Nobody answer to my emails from 4 days ... Thanks !

Pages: [1] 2 »