 Show Posts
|
|
Pages: [1]
|
|
is it possible to mine eth + zil in the ethermine pool using the new lolminer 1.20 function? any example of the bat?
|
|
|
|
Testing version 1.19 on RaveOS On my ASUS B-250 MINING EXPERT platform I no longer have the problems I had with version 1.18 using --4g-alloc-size 4080 and leaving in automatic --zombie-tune testing if it's stable but at the moment all very well thanks for the update  kinda curious cuz i has the same problems with 1.18 and ive been looking at switching to more dense rigs can u by chance console or ssh into ur mining OS and do a "lspci -t"? so i can see how the pcie lanes are divided it will be long but something like this -[0000:00]-+-00.0 +-01.0-[01-03]----00.0-[02-03]----00.0-[03]--+-00.0 | \-00.1 +-02.0 +-03.0 +-14.0 +-16.0 +-1a.0 +-1b.0 +-1c.0-[04-11]----00.0-[05-11]--+-01.0-[06-08]----00.0-[07-08]----00.0-[08]--+-00.0 | | \-00.1 | +-03.0-[09-0b]----00.0-[0a-0b]----00.0-[0b]--+-00.0 | | \-00.1 | +-05.0-[0c-0e]----00.0-[0d-0e]----00.0-[0e]--+-00.0 | | \-00.1 | \-07.0-[0f-11]----00.0-[10-11]----00.0-[11]--+-00.0 | \-00.1 this is what 4 cards look like on a splitter, the last numbers are cards 00.0 vga 00.1 audio and im assuming ur mobo has lots of them root@CELERON-B250:~# root@CELERON-B250:~# lspci -t -[0000:00]-+-00.0 +-01.0-[01]--+-00.0 | \-00.1 +-02.0 +-14.0 +-16.0 +-17.0 +-1b.0-[02-0a]----00.0-[03-0a]--+-01.0-[04]--+-00.0 | | \-00.1 | +-02.0-[05]-- | +-03.0-[06]--+-00.0 | | \-00.1 | +-04.0-[07]-- | +-05.0-[08]--+-00.0 | | \-00.1 | +-06.0-[09]--+-00.0 | | \-00.1 | \-07.0-[0a]--+-00.0 | \-00.1 +-1c.0-[0b]--+-00.0 | \-00.1 +-1c.5-[0c]--+-00.0 | \-00.1 +-1c.6-[0d]--+-00.0 | \-00.1 +-1c.7-[0e]--+-00.0 | \-00.1 +-1d.0-[0f]--+-00.0 | \-00.1 +-1d.1-[10]--+-00.0 | \-00.1 +-1d.3-[11]--+-00.0 | \-00.1 +-1f.0 +-1f.2 +-1f.4 \-1f.6 root@CELERON-B250:~# placing only --4g-alloc-size 4080 or 4078 without placing anything else you still have problems? |
|
|
|
Hello, I have two 4gb platforms both working with RaveOS One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards  and on the other nine cards I get 21.5 MHS I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes. Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all  For the rig is not working properly... you can use -- zombie-tune individually for each card. Try first 0, later 1 and later 2. Analyse which are the best values for each card and put them in order separate by , for example 2,1,1,0,1... so that will give you the best performance. I.hope that improve some extra!! Thank you very much for responding, try --zombie-tune specifying each card and get the same result --zombie-tune 2 - The five cards with low hashrate around 1 MHS each and the remaining Eight 23 MHS --zombie-tune 1 - The five cards with low hashrate around 4 MHS each and the remaining Eight 21.8 MHS --zombie-tune 0 - The platform crashes instantly when you start When placing --zombie-tune 1,0,0,0,0,0,1,1,1,1,1,1 (where 0 are the ones that generate low hashrate with zombie tune) the platform similarly crashes when starting I've already tried placing different --4g-alloc-size values from 4080 to 4040 and get the same result  All I can think about is that the ASUS B-250 MINING EXPERT doesn't get along with the --zombie-tune, already in the BIOS active PCI GEN 2 I have 4GB of ram in the system but I don't think that influences?  Testing version 1.19 on RaveOS On my ASUS B-250 MINING EXPERT platform I no longer have the problems I had with version 1.18 using --4g-alloc-size 4080 and leaving in automatic --zombie-tune testing if it's stable but at the moment all very well thanks for the update |
|
|
|
Hello, I have two 4gb platforms both working with RaveOS One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes. Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all For the rig is not working properly... you can use -- zombie-tune individually for each card. Try first 0, later 1 and later 2. Analyse which are the best values for each card and put them in order separate by , for example 2,1,1,0,1... so that will give you the best performance. I.hope that improve some extra!! Thank you very much for responding, try --zombie-tune specifying each card and get the same result --zombie-tune 2 - The five cards with low hashrate around 1 MHS each and the remaining Eight 23 MHS --zombie-tune 1 - The five cards with low hashrate around 4 MHS each and the remaining Eight 21.8 MHS --zombie-tune 0 - The platform crashes instantly when you start When placing --zombie-tune 1,0,0,0,0,0,1,1,1,1,1,1 (where 0 are the ones that generate low hashrate with zombie tune) the platform similarly crashes when starting I've already tried placing different --4g-alloc-size values from 4080 to 4040 and get the same result All I can think about is that the ASUS B-250 MINING EXPERT doesn't get along with the --zombie-tune, already in the BIOS active PCI GEN 2 I have 4GB of ram in the system but I don't think that influences? |
|
|
|
Hello, I have two 4gb platforms both working with RaveOS One of them is an old platform with an ASUS P5K DELUXE motherboard that works perfect for me with the latest version 1.18 --4g-alloc-size 4080 --zombie-tune 1 with four rx584 generating on average 21.5 MHS each card My other platform an ASUS B-250 MINING EXPERT with 13 RX584/574 using the same parameter --4g-alloc-size 4080 --zombie-tune 1 I always get 4MHS always on five cards and on the other nine cards I get 21.5 MHS I've already tried everything, the motherboard has pci GEN 2 activated, I've changed --4g-alloc-size 4080 to 4078 4076 4074 so on until I reach 4060 and it doesn't increase the speed on those five cards, change the risers and nothing changes. Is it a problem with ASUS B-250 MINING EXPERT? I can't use --zombie-tune 0 because the platform crashes instantly at startup, this doesn't happen with version 1.17 which works great on this platform using --4g-alloc-size 4080 but with 20 MHS on average on each card I also want to thank the creator of lolminer for his great work is without a doubt the miner with the best zombie mode of all |
|
|
|
|
In RaveOS the latest version does not work, when starting the miner the platform it restarts using version 1.18 and 1.18A (worker_rebooting_by_flag_auto) this happens in my two 4GB platforms, instead version 1.17 works perfectly in both.
Am I doing something wrong or is it a problem with the version included in RaveOs?
|
|
|
|
|
With the new size of dag 383 there is some way to have full hashrate on 4gb cards or to improve my hashrate?
--4g-alloc-size 4080 --keepfree 5 Epoch 382: 385MHS
--4g-alloc-size 4080 --keepfree 5 Epoch 383: 358MHS
All this on a 13 RX570 4GB RIG
|
|
|
|
I have been able to continue mining after Epoch 382 with full rate:
Simplemining:
--algo ETHASH --pool poolurl:port --user wallet.rigname --pass x --apiport 4444 --4g-alloc-size 4080
HiveOS:
Add in extra parameters : --4g-alloc-size 4080
If 4080 doesn't work try 4076 you will loose 2Mhs.
Enjoy full Mhs
Excuse me is there any way to force that command only on some gpus? and leave the card that provides video with the value that the miner automatically assigns? I have a platform with 7 gpus that does not have integrated video and when I introduce the --4g-alloc-size 4080 command the main card does not have enough memory for the dag, but the other 6 gpus regenerate 30 mhs. However without adding the command the 7 gps start but each generates about 26 mhs, I already tried --4g-alloc-size 4076 and the main card does not have enough memory. I'm using rave o'am, I'm sorry my bad English |
|
|
|
Thank you for responding, connect each hashboard individually and no hash lifts. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at f0006000, irq=43
[ 0.000616] Console: colour dummy device 80x30
[ 0.000653] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040209] pid_max: default: 32768 minimum: 301
[ 0.040430] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040452] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042579] CPU: Testing write buffer coherency: ok
[ 0.042925] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042986] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043213] L310 cache controller enabled
[ 0.043232] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121036] CPU1: Booted secondary processor
[ 0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210359] Brought up 2 CPUs
[ 0.210378] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211040] devtmpfs: initialized
[ 0.213443] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214645] regulator-dummy: no parameters
[ 0.222336] NET: Registered protocol family 16
[ 0.224633] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226908] cpuidle: using governor ladder
[ 0.226922] cpuidle: using governor menu
[ 0.234345] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235865] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235878] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235993] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257536] bio: create slab <bio-0> at 0
[ 0.258945] vgaarb: loaded
[ 0.259632] SCSI subsystem initialized
[ 0.260668] usbcore: registered new interface driver usbfs
[ 0.260847] usbcore: registered new interface driver hub
[ 0.261102] usbcore: registered new device driver usb
[ 0.261632] media: Linux media interface: v0.10
[ 0.261789] Linux video capture interface: v2.00
[ 0.262027] pps_core: LinuxPPS API ver. 1 registered
[ 0.262039] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262168] PTP clock support registered
[ 0.262524] EDAC MC: Ver: 3.0.0
[ 0.263571] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266420] DMA-API: preallocated 4096 debug entries
[ 0.266434] DMA-API: debugging enabled by kernel config
[ 0.266507] Switched to clocksource arm_global_timer
[ 0.287048] NET: Registered protocol family 2
[ 0.287716] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287811] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287971] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288032] TCP: reno registered
[ 0.288051] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288104] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288368] NET: Registered protocol family 1
[ 0.288728] RPC: Registered named UNIX socket transport module.
[ 0.288742] RPC: Registered udp transport module.
[ 0.288750] RPC: Registered tcp transport module.
[ 0.288759] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288772] PCI: CLS 0 bytes, default 64
[ 0.289219] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291238] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292650] bounce pool size: 64 pages
[ 0.293545] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293746] msgmni has been set to 1486
[ 0.294532] io scheduler noop registered
[ 0.294545] io scheduler deadline registered
[ 0.294586] io scheduler cfq registered (default)
[ 0.307197] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.307218] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.431138] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003846] console [ttyPS0] enabled
[ 1.008118] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.015733] [drm] Initialized drm 1.1.0 20060810
[ 1.032773] brd: module loaded
[ 1.042163] loop: module loaded
[ 1.051773] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057595] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065330] libphy: XEMACPS mii bus: probed
[ 1.069878] ------------- phy_id = 0x3625e62
[ 1.074610] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.083338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.089995] ehci-pci: EHCI PCI platform driver
[ 1.097228] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104020] usbcore: registered new interface driver usb-storage
[ 1.110888] mousedev: PS/2 mouse device common for all mice
[ 1.116993] i2c /dev entries driver
[ 1.123926] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.129485] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.135368] Xilinx Zynq CpuIdle Driver started
[ 1.140236] sdhci: Secure Digital Host Controller Interface driver
[ 1.146328] sdhci: Copyright(c) Pierre Ossman
[ 1.150709] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.157485] mmc0: no vqmmc regulator found
[ 1.161496] mmc0: no vmmc regulator found
[ 1.206545] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.215229] usbcore: registered new interface driver usbhid
[ 1.220747] usbhid: USB HID core driver
[ 1.225457] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.231757] nand: Micron MT29F2G08ABAEAWP
[ 1.235727] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.241684] Bad block table found at page 131008, version 0x01
[ 1.247940] Bad block table found at page 130944, version 0x01
[ 1.253988] 3 ofpart partitions found on MTD device pl353-nand
[ 1.259759] Creating 3 MTD partitions on "pl353-nand":
[ 1.264861] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.272924] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.280259] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.289197] TCP: cubic registered
[ 1.292434] NET: Registered protocol family 17
[ 1.297157] Registering SWP/SWPB emulation handler
[ 1.303085] regulator-dummy: disabling
[ 1.307485] UBI: attaching mtd1 to ubi0
[ 1.833879] UBI: scanning is finished
[ 1.845495] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.852571] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.859334] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.865998] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.872875] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.878856] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.885963] UBI: max/mean erase counter: 17/9, WL threshold: 4096, image sequence number: 248547359
[ 1.895007] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.904222] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.904227] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.908166] ALSA device list:
[ 1.908170] No soundcards found.
[ 1.924553] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.953559] UBIFS: recovery needed
[ 2.187888] UBIFS: recovery completed
[ 2.191570] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.197519] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.206626] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.216515] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.221544] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[ 2.232853] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.240045] devtmpfs: mounted
[ 2.243146] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 3.091434] random: dd urandom read with 0 bits of entropy available
[ 3.486534]
[ 3.486534] bcm54xx_config_init
[ 4.096520]
[ 4.096520] bcm54xx_config_init
[ 8.097396] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 8.103487] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 24.221126] In axi fpga driver!
[ 24.224217] request_mem_region OK!
[ 24.227647] AXI fpga dev virtual address is 0xf01fe000
[ 24.232697] *base_vir_addr = 0xc510
[ 24.248356] In fpga mem driver!
[ 24.251429] request_mem_region OK!
[ 24.254995] fpga mem virtual address is 0xf3000000
[ 25.055937]
[ 25.055937] bcm54xx_config_init
[ 25.685885]
[ 25.685885] bcm54xx_config_init
[ 29.686329] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 29.692346] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 81444d227075885c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x06003c0c
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=1 on chain[2], value=930
get PIC voltage=1 on chain[3], value=930
get PIC voltage=1 on chain[10], value=930
get PIC voltage=1 on chain[11], value=930
get PIC voltage=1 on chain[12], value=930
get PIC voltage=1 on chain[13], value=930
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
set_reset_allhashboard = 0x00000000
chain[10] temp offset record: 1,5,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,3,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 6, total chain num = 6
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1389 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 17 18:17:49 CST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81444d227075885c
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
Checking fans!get fan[5] speed=4560
get fan[2] speed=4440
get fan[5] speed=4560
get fan[2] speed=4440
get fan[5] speed=4560
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
Chain[J4] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J3] orignal chain_voltage_pic=1 value=930
Chain[J3] will use backup chain_voltage_pic=870 [11]
Chain[J3] get working chain_voltage_pic=11
Chain[J4] orignal chain_voltage_pic=1 value=930
Chain[J4] will use backup chain_voltage_pic=870 [11]
Chain[J4] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J3] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=1
do heat board 8xPatten for 1 times
setStartTimePoint total_tv_start_sys=252 total_tv_end_sys=253
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=1
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000302] ps7-ttc #0 at f0006000, irq=43
[ 0.000611] Console: colour dummy device 80x30
[ 0.000649] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040208] pid_max: default: 32768 minimum: 301
[ 0.040429] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040451] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042571] CPU: Testing write buffer coherency: ok
[ 0.042922] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042981] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043206] L310 cache controller enabled
[ 0.043225] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121031] CPU1: Booted secondary processor
[ 0.210226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210357] Brought up 2 CPUs
[ 0.210376] SMP: Total of 2 processors activated.
[ 0.210384] CPU: All CPU(s) started in SVC mode.
[ 0.211038] devtmpfs: initialized
[ 0.213441] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214648] regulator-dummy: no parameters
[ 0.222343] NET: Registered protocol family 16
[ 0.224633] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.226907] cpuidle: using governor ladder
[ 0.226921] cpuidle: using governor menu
[ 0.234353] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.235869] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.235883] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.235997] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.257531] bio: create slab <bio-0> at 0
[ 0.258945] vgaarb: loaded
[ 0.259641] SCSI subsystem initialized
[ 0.260699] usbcore: registered new interface driver usbfs
[ 0.260872] usbcore: registered new interface driver hub
[ 0.261124] usbcore: registered new device driver usb
[ 0.261655] media: Linux media interface: v0.10
[ 0.261812] Linux video capture interface: v2.00
[ 0.262060] pps_core: LinuxPPS API ver. 1 registered
[ 0.262072] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.262195] PTP clock support registered
[ 0.262556] EDAC MC: Ver: 3.0.0
[ 0.263601] Advanced Linux Sound Architecture Driver Initialized.
[ 0.266443] DMA-API: preallocated 4096 debug entries
[ 0.266456] DMA-API: debugging enabled by kernel config
[ 0.266536] Switched to clocksource arm_global_timer
[ 0.287117] NET: Registered protocol family 2
[ 0.287761] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.287856] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.288015] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.288076] TCP: reno registered
[ 0.288095] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288147] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.288413] NET: Registered protocol family 1
[ 0.288723] RPC: Registered named UNIX socket transport module.
[ 0.288735] RPC: Registered udp transport module.
[ 0.288744] RPC: Registered tcp transport module.
[ 0.288752] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.288764] PCI: CLS 0 bytes, default 64
[ 0.289203] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.291229] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.292617] bounce pool size: 64 pages
[ 0.293537] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.293731] msgmni has been set to 1486
[ 0.294502] io scheduler noop registered
[ 0.294516] io scheduler deadline registered
[ 0.294554] io scheduler cfq registered (default)
[ 0.308477] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308498] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.433037] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.006101] console [ttyPS0] enabled
[ 1.010397] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.018072] [drm] Initialized drm 1.1.0 20060810
[ 1.034963] brd: module loaded
[ 1.044358] loop: module loaded
[ 1.053786] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.059750] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.067493] libphy: XEMACPS mii bus: probed
[ 1.071862] ------------- phy_id = 0x3625e62
[ 1.076775] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.085410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092201] ehci-pci: EHCI PCI platform driver
[ 1.099457] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.106254] usbcore: registered new interface driver usb-storage
[ 1.113201] mousedev: PS/2 mouse device common for all mice
[ 1.119358] i2c /dev entries driver
[ 1.126265] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.131785] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.137719] Xilinx Zynq CpuIdle Driver started
[ 1.142556] sdhci: Secure Digital Host Controller Interface driver
[ 1.148678] sdhci: Copyright(c) Pierre Ossman
[ 1.152993] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.159885] mmc0: no vqmmc regulator found
[ 1.163898] mmc0: no vmmc regulator found
[ 1.206557] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.215256] usbcore: registered new interface driver usbhid
[ 1.220760] usbhid: USB HID core driver
[ 1.225479] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.231773] nand: Micron MT29F2G08ABAEAWP
[ 1.235742] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.241677] Bad block table found at page 131008, version 0x01
[ 1.247898] Bad block table found at page 130944, version 0x01
[ 1.253952] 3 ofpart partitions found on MTD device pl353-nand
[ 1.259737] Creating 3 MTD partitions on "pl353-nand":
[ 1.264824] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.272879] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.280195] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.289142] TCP: cubic registered
[ 1.292380] NET: Registered protocol family 17
[ 1.297095] Registering SWP/SWPB emulation handler
[ 1.302989] regulator-dummy: disabling
[ 1.307328] UBI: attaching mtd1 to ubi0
[ 1.833699] UBI: scanning is finished
[ 1.845340] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.852423] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.859185] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.865848] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.872726] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.878707] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.885814] UBI: max/mean erase counter: 17/9, WL threshold: 4096, image sequence number: 248547359
[ 1.894857] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.904074] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.904079] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.908036] ALSA device list:
[ 1.908040] No soundcards found.
[ 1.924446] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.953592] UBIFS: recovery needed
[ 2.088314] UBIFS: recovery completed
[ 2.091994] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.097946] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.107047] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.116935] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.121965] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[ 2.133261] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.140449] devtmpfs: mounted
[ 2.143552] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.986842] random: dd urandom read with 0 bits of entropy available
[ 3.376569]
[ 3.376569] bcm54xx_config_init
[ 3.986579]
[ 3.986579] bcm54xx_config_init
[ 7.987410] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.993500] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 22.201415] In axi fpga driver!
[ 22.204480] request_mem_region OK!
[ 22.207901] AXI fpga dev virtual address is 0xf01fe000
[ 22.212978] *base_vir_addr = 0xc510
[ 22.228456] In fpga mem driver!
[ 22.231528] request_mem_region OK!
[ 22.235094] fpga mem virtual address is 0xf3000000
[ 23.025951]
[ 23.025951] bcm54xx_config_init
[ 23.655907]
[ 23.655907] bcm54xx_config_init
[ 27.656357] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 27.662379] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram: 1039794176
Detect 1GB control board of XILINX
DETECT HW version=8000c510
miner ID : 81444d227075885c
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x06003c0c
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[2]! try again...
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
dsPIC33EP16GS202_reset_pic failed on Chain[3]! try again...
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]! try again...
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=1 on chain[2], value=930
get PIC voltage=1 on chain[3], value=930
get PIC voltage=1 on chain[10], value=930
get PIC voltage=1 on chain[11], value=930
get PIC voltage=1 on chain[12], value=930
get PIC voltage=1 on chain[13], value=930
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x00000000
chain[10] temp offset record: 1,5,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,3,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[2]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
dsPIC33EP16GS202_pic_heart_beat failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 6, total chain num = 6
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2329 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 1GB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 17 18:17:49 CST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 81444d227075885c
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
Checking fans!get fan[5] speed=4440
get fan[2] speed=4320
get fan[5] speed=4440
get fan[2] speed=4320
get fan[5] speed=4440
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
dsPIC33EP16GS202_reset_pic failed on Chain[3]!
chain[3] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[3]!
Check chain[3] PIC fw version=0xff
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
Chain[J4] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[3]!
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J3] orignal chain_voltage_pic=1 value=930
Chain[J3] will use backup chain_voltage_pic=870 [11]
Chain[J3] get working chain_voltage_pic=11
Chain[J4] orignal chain_voltage_pic=1 value=930
Chain[J4] will use backup chain_voltage_pic=870 [11]
Chain[J4] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 2 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 3 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 4 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 5 time
Chain[J3] has 0 asic
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[3]!
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 6 time
Chain[J3] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=1
do heat board 8xPatten for 1 times
setStartTimePoint total_tv_start_sys=315 total_tv_end_sys=316
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
the 3 have the same fault, I do not raise the 3rd log by the limit of 64000 characters, I bought this equipment at about $ 30 to have spare fan and controller card but I noticed that the 3 hashboard presented the same error and I assumed that they updated the firmware and something went wrong. I'm from Venezuela, I know it's an old equipment but as you know the energy is free I have other miners of this model and I try changing the controller card and still have the same fault. can still be an update error? or are already physical failures in the hashboard. |
|
|
|
Hello, I recently bought a damaged T9+ to replace (Fan, controller card) my other antminer and the 3 hasboard present this error: [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000315] ps7-ttc #0 at df804000, irq=43
[ 0.000625] Console: colour dummy device 80x30
[ 0.000657] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040211] pid_max: default: 32768 minimum: 301
[ 0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042631] CPU: Testing write buffer coherency: ok
[ 0.042978] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043040] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043264] L310 cache controller enabled
[ 0.043284] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121039] CPU1: Booted secondary processor
[ 0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210381] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211087] devtmpfs: initialized
[ 0.213505] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214759] regulator-dummy: no parameters
[ 0.223745] NET: Registered protocol family 16
[ 0.226061] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228373] cpuidle: using governor ladder
[ 0.228386] cpuidle: using governor menu
[ 0.235924] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237463] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237477] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237598] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259526] bio: create slab <bio-0> at 0
[ 0.262232] vgaarb: loaded
[ 0.262971] SCSI subsystem initialized
[ 0.263864] usbcore: registered new interface driver usbfs
[ 0.264037] usbcore: registered new interface driver hub
[ 0.264265] usbcore: registered new device driver usb
[ 0.264788] media: Linux media interface: v0.10
[ 0.264956] Linux video capture interface: v2.00
[ 0.265197] pps_core: LinuxPPS API ver. 1 registered
[ 0.265209] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.265336] PTP clock support registered
[ 0.265691] EDAC MC: Ver: 3.0.0
[ 0.266747] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269708] DMA-API: preallocated 4096 debug entries
[ 0.269724] DMA-API: debugging enabled by kernel config
[ 0.269819] Switched to clocksource arm_global_timer
[ 0.289887] NET: Registered protocol family 2
[ 0.290585] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290644] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290729] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290781] TCP: reno registered
[ 0.290799] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290832] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291082] NET: Registered protocol family 1
[ 0.291466] RPC: Registered named UNIX socket transport module.
[ 0.291480] RPC: Registered udp transport module.
[ 0.291488] RPC: Registered tcp transport module.
[ 0.291497] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.291510] PCI: CLS 0 bytes, default 64
[ 0.291988] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294075] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296233] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.296420] msgmni has been set to 967
[ 0.297226] io scheduler noop registered
[ 0.297239] io scheduler deadline registered
[ 0.297282] io scheduler cfq registered (default)
[ 0.308907] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.308927] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.437366] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.005772] console [ttyPS0] enabled
[ 1.010119] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.017740] [drm] Initialized drm 1.1.0 20060810
[ 1.034801] brd: module loaded
[ 1.044282] loop: module loaded
[ 1.053993] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.059743] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.067728] libphy: XEMACPS mii bus: probed
[ 1.072295] ------------- phy_id = 0x3625e62
[ 1.077045] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.085976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.092801] ehci-pci: EHCI PCI platform driver
[ 1.100057] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.106863] usbcore: registered new interface driver usb-storage
[ 1.113778] mousedev: PS/2 mouse device common for all mice
[ 1.119908] i2c /dev entries driver
[ 1.126866] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.132397] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.138299] Xilinx Zynq CpuIdle Driver started
[ 1.143215] sdhci: Secure Digital Host Controller Interface driver
[ 1.149311] sdhci: Copyright(c) Pierre Ossman
[ 1.153678] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.160542] mmc0: no vqmmc regulator found
[ 1.164558] mmc0: no vmmc regulator found
[ 1.209863] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.218554] usbcore: registered new interface driver usbhid
[ 1.224057] usbhid: USB HID core driver
[ 1.228793] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.235090] nand: Micron MT29F2G08ABAEAWP
[ 1.239058] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.245002] Bad block table found at page 131008, version 0x01
[ 1.251226] Bad block table found at page 130944, version 0x01
[ 1.257278] 3 ofpart partitions found on MTD device pl353-nand
[ 1.263057] Creating 3 MTD partitions on "pl353-nand":
[ 1.268148] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.276248] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.283570] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.292565] TCP: cubic registered
[ 1.295800] NET: Registered protocol family 17
[ 1.300531] Registering SWP/SWPB emulation handler
[ 1.306452] regulator-dummy: disabling
[ 1.310853] UBI: attaching mtd1 to ubi0
[ 1.838616] UBI: scanning is finished
[ 1.850401] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.857456] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.864259] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.870921] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.877765] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.883772] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.890894] UBI: max/mean erase counter: 126/62, WL threshold: 4096, image sequence number: 248547359
[ 1.900086] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.909289] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.909295] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.913327] ALSA device list:
[ 1.913331] No soundcards found.
[ 1.929720] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.996221] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.002174] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.011279] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.021169] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.026197] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D5E65D66-FDFF-460C-B3DB-A1F2DEB908D8, small LPT model
[ 2.037739] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.045178] devtmpfs: mounted
[ 2.048289] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.892395] random: dd urandom read with 0 bits of entropy available
[ 3.289840]
[ 3.289840] bcm54xx_config_init
[ 3.899866]
[ 3.899866] bcm54xx_config_init
[ 7.900703] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 7.906793] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 24.777082] In axi fpga driver!
[ 24.780183] request_mem_region OK!
[ 24.783547] AXI fpga dev virtual address is 0xdf9fc000
[ 24.788652] *base_vir_addr = 0xc510
[ 24.804571] In fpga mem driver!
[ 24.807646] request_mem_region OK!
[ 24.811259] fpga mem virtual address is 0xe2000000
[ 25.619250]
[ 25.619250] bcm54xx_config_init
[ 26.249199]
[ 26.249199] bcm54xx_config_init
[ 30.249679] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 30.255702] xemacps e000b000.ps7-ethernet: link up (100/FULL)
Detect 512MB control board of XILINX
Miner Type = T9+
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
dsPIC33EP16GS202_reset_pic failed on Chain[1]!
chain[1] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[1]!
Check chain[1] PIC fw version=0xff
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
dsPIC33EP16GS202_reset_pic failed on Chain[2]!
chain[2] PIC jump to app
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_jump_to_app_from_loader failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
dsPIC33EP16GS202_get_pic_sw_version failed on Chain[2]!
Check chain[2] PIC fw version=0xff
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[J2] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[1]!
Chain[J3] will use voltage=930 [1] to open core
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
set_Voltage_S9_plus_plus_BM1387_54 failed on Chain[2]!
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Fix freq=675 custom_voltage_value=890 custom_voltage_enabled=1 disable_fan_check=0 fixed_frequency=1
Fix freq=675 Chain[1] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[2] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[3] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[8] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[9] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[10] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[11] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[12] voltage_pic=7 value=890
voltage_config=7792714
Fix freq=675 Chain[13] voltage_pic=7 value=890
voltage_config=7792714
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[1]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
dsPIC33EP16GS202_enable_pic_dc_dc failed on Chain[2]!
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J2] has 0 asic
Chain[J3] has 0 asic
Chain[J4] has 0 asic
Chain[J9] has 0 asic
Chain[J10] has 0 asic
Chain[J11] has 0 asic
Chain[J12] has 0 asic
Chain[J13] has 0 asic
Chain[J14] has 0 asic
miner total rate=0GH/s fixed rate=0GH/s
Miner fix freq ...
max freq = 100
set baud=16
restartNum = 2 , auto-reinit enabled...
setStartTimePoint total_tv_start_sys=343 total_tv_end_sys=344
do read_temp_func once...
do check_asic_reg 0x08
Done check_asic_reg
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
would it be possible to repair the hashboards following the steps of this post by means of a pickit3? if possible I would buy this one: https://www.amazon.com/gp/product/B011BBQQEK. Would that do? Thank you! |
|
|
|
Hi I was working with this pool using Claymore 11 extracting XVG as a second currency. The problem I have is that despite placing a wallet XVG valid and have assigned in the Claymore Bat the currency I wanted to receive as payment-Dcoin blake2s-DPSW c = XVG Zpool I assign Unobtanium (UNO) as the main currency and now I have a balance I can not withdraw R because my wallet is XVG is there any way to change the address of the wallet and assign one of Unobtanium (UNO)? http://Http://www.zpool.ca/?address=D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmMfixed. Thank you for making the change of currency but it is not possible to make an adjustment in The amount of coins XVG in my account? Taenia 0.03448132 UNO and now as cattle I have the same amount but 0.03448132 XVG when it should be approximately 100 XVG  |
|
|
|
Hi I was working with this pool using Claymore 11 extracting XVG as a second currency. The problem I have is that despite placing a wallet XVG valid and have assigned in the Claymore Bat the currency I wanted to receive as payment-Dcoin blake2s-DPSW c = XVG Zpool I assign Unobtanium (UNO) as the main currency and now I have a balance I can not withdraw R because my wallet is XVG is there any way to change the address of the wallet and assign one of Unobtanium (UNO)? http://Http://www.zpool.ca/?address=D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmM |
|
|
|
|
Hello when trying to join the group Antminepool does not make me connection
B2S: Authorization failed: (NULL)
Socket was closed remotely (by pool)
B2S: Job timeout, disconnect, retry in 20 sec...
This only happens if in wallet I put a XVG address that I have of Bittrex but if I take an address XVG of other users who have published here works perfect.
Is there a problem with that address of Bittrex?
Another problem I have is in zpool since yesterday I am extracting XVG with the same wallet of Bittrex D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmM and I have a pending payment that has not been reflected in Bittrex what I call the attention is that in Zpool shows me the Mon Eda Unobtanium and the wallet you have assigned is from XVG and the payment I have pending sample Total Paid * * * 0.02558559 UNO Will it be that the payment does not come because it is in a different currency?
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -eworker ortadan.ASRock -ewal 0x3ecd934271818d98b95f9591fd7ea1d8163c2fa7 -epsw x -estale 0 -di 0 -tstop 80 -tt -55 -cclock 1100 -mclock 1950 -powlim 50 -cvddc 850 -mvddc 850 -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D6mz8XLApBjeHEdrNXoFh8vZ5bjbxrbBmM -dpsw c=XVG -dcoin blake2s -dcri 50 -allpools 1
|
|
|
|
|
