 Show Posts
|
|
Pages: [1] 2 3 4 »
|
|
I want to withdraw the balance from my wallet, but I can’t withdraw it without synchronization.
|
|
|
|
|
Who can help solve the problem, the wallet does not sync CHINET ?
|
|
|
|
|
Doesn't help, doesn't sync?
|
|
|
|
|
The wallet is not synchronizing CHN? What should I do?
|
|
|
|
|
Why is my wallet not syncing?
|
|
|
|
Recently, a new version of the miner lolMiner 1.74 has appeared. Added Ironfish mining.:
"Added support for Ironfish mining (use -a IRONFISH for putting out your rod) for Nvidia Pascal and newer and AMD Vega and newer GPUs. (AMD Vega require rocm based drivers). Fee is 0.75%.
This version uses the pool protocol extension of TeamRedMiner and should be compatible to all pools supporting their protocol as well as their solo mining protocol fork of Ironfish node."
Links can be found in 1 post by Lolliedieb (OP)
Windows  |
|
|
|
|
I can’t withdraw from my wallet to the exchange, how can I fix it?
Writes:
Fee estimation failed.Fallbackfee is disabled.Wait a few blocks or enable -fallbackfee.
Where to turn it on in the wallet?
|
|
|
|
 [/quote] How it works? |
|
|
|
Hi Worked like a charm so far  - Somehow every instance of Trex is suddenly using 11-12% CPU of Ryzen 5. I had to do a Bios reset. Before it was like below 1% CPU usage per instance. I also changed some system settings because recently I added from stock a GTX 970 would not work in Trex for Ergo, ETC. "Can't find nonce with device. Cuda exception. Cuda error not supported." It works fine in miniZ miner. Any Idea about sudden high CPU Usage? Maxwell still supported? I read it should be. Best regards If you experience high CPU usage by T-Rex miner process on Windows and your NVIDIA drivers are 471.11 or newer, the most likely cause is the "Hardware-accelerated GPU Scheduling" feature. To disable it, go to Start -> Settings -> Display -> Graphics settings, and turn it off. |
|
|
|
|
10
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v37.5, GPU Miner for ETH, CFX, RVN, GRIN, BEAM, AE, ERGO, ZIL
|
on: July 21, 2021, 03:54:46 PM
|
|
How to run a miner on a pool crazypool ?
|
|
|
|
The new beta version is finally ready. You can download PhoenixMiner 5.6a from here: PhoenixMiner_5.6a_Windows.zip (GitHub) PhoenixMiner_5.6a_Linux.tar.gz (GitHub) To check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_5.6a_Windows.zip
===================================
SHA-1: e9134f0b3985e967597f1e82c1cd7b0246fe4568
SHA-256: e3e10bc0ed7af17c4f38fb8314f9c72350750a554475498346f67a0a590e759b
SHA-512: 66b3e39daaadcb85fb79143697d8e10f7fc27bc8fc464f48ce1f362fc96235b15aa8a78bcfc547cd1416ebed19bb6e65746136a93318bc17875f50754ba90e57
File: PhoenixMiner_5.6a_Linux.tar.gz
====================================
SHA-1: d733df2b92876a1ecaff8c7d1f8fe6d5bf675f2d
SHA-256: 671218da670fc02318e3b4c296b9335984997a512242bdc7d17ed2cde2506de0
SHA-512: b38934dbdbaff49894ee30d4ae2937b84cd9f997432d68fffc8e23fb1cf8cab57d139533eee354b3be6625987bf628956c54826d42a21bbcebdc76edc3e521d4
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
Please let us know if you have any problems or questions related to PhoenixMiner 5.6a. VERY THX BOOS PHOENIXMINER 5.6a is the nº1 thanks Will RTX 3060 mine without installation on a motherboard, speed 48-50 mh / s? |
|
|
|
|
12
|
Alternate cryptocurrencies / Mining (Altcoins) / Re: NBMiner v34.5, GPU Miner for ETH, CFX, RVN, GRIN, BEAM, AE, BTM, SERO, HNS, BFC.
|
on: December 06, 2020, 03:57:27 PM
|
|
How to use for memory tweak nvidia?
|
|
|
|
|
Who ran 6 GB on 1060, what did they write in the batch file, what is the speed ETH? Thanks
|
|
|
|
|
aXUgL5oRMgderDKfVSsQCmzTWFMihoJqss Aleksandr
|
|
|
|
Is that a virus PhoenixMiner 5.1c ,new version 5.0e |
|
|
|
Who was able to run EPIC on the pool? |
|
|
|
The new beta version is ready. You can download PhoenixMiner 5.1b from here: https://mega.nz/folder/XYkTQZiI#HT_dcKdLtsU26nwbE8pMBQ (MEGA) If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_5.1b_Windows.zip
===================================
SHA-1: b71a5b22bb9a6fbd26d4a85272f73defabad2b70
SHA-256: 1592d04efa4ef427b6e42388d012ac6a68154f09848aaaa4f0418e3425e07155
SHA-512: c543b8bc5d0c345e81fb2586b2807b842fc2b666bd033ceb78820d1732a61ef8529a228f9df8777029dfc9f7a8e90853fa65600c4d3b976787e1630f0ea03dfd
File: PhoenixMiner_5.1b_Linux.tar.gz
====================================
SHA-1: 9ba244a12698ca30015ef273c9f3cd9a9443c04f
SHA-256: ade4a07bd0c738fb875b2a42b5153271fedd23c60ba4527655360a8f718be4de
SHA-512: 860491408731c63bf42bb8288711de2f29534b4bac14313e376869d221a62a985ce4ea1a5a22cb39d875eb876016aa741275702665cc3ee1116c5cc3637ec21c
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are: - Added support for VRAM timing adjustments for Nvidia cards of 10x0 series (see the new command-line parameters -straps, -vmt1, -vmt2, -vmt3, and -vmr for more information)
- Added -ttli option to automatically decrease the mining speed to avoid overheating the GPUs over the target temperature (useful when -tmax option is not supported by the drivers)
- Added support for latest AMD drivers 20.7.1 under Windows and 20.20-1089974 under Linux
- Fixed long-standing problems with -gpow option, which now works properly
- Many other small improvements and fixes
Here are some additional notes about the VRAM timing adjustments of Nvidia 10x0 cards: - Most recent Nvidia drivers require running as administrator (or as root under Linux) to allow hardware control, so you need to run PhoenixMiner as administrator for the VRAM timing options to work.
- The four independently adjustable VRAM timings are controlled by four different parameters: -vmt1, -vmt2, -vmt3, and -vmr. The last one controls the memory refresh rate, and the first three are other timings. The possible values for each of them are from 0 to 100, where 0 are the default timings, and 100 is the most aggressive timing (most GPUs probably wont work with 100).
- The -straps option gives an easy way to set one of the predefined levels of VRAM timing adjustment. The possible values are 0 to 6. 0 is the default value and uses the default timings from the VBIOS. Each strap level corresponds to a predefined set of memory timings ("-vmt1", "-vmt2", "-vmt3", "-vmr"). Strap level 3 is the fastest predefined level and may not work on most cards, 1 is the slowest (but still faster than the default timings). Strap levels 4 to 6 are the same as 1 to 3 but with less aggressive refresh rates (i.e. lower "-vmr" values).
- When using the VRAM timing options, start with lower values and make sure that the cards are stable before trying higher and more aggressive settings. You can use -straps along with the other options. For example -straps 1 -vmt1 60 will use the timings from 1st strap level but -vmt1 will be set to 60 instead of whatever value is specified by the 1st strap level. In such case the -straps option must be specified first.
- The VRAM timing options can be quite different between the GPUs, even when the GPUs are the same model. Therefore, you can (and probably should) specify the VRAM timing options separately for each GPU.
Please let us know if you have any problems or questions related to PhoenixMiner 5.1b. I can’t achieve an increase in speed. Maybe an example of a body shirt for 6shi 1060 6g? |
|
|
|
|
Nvidia KDA card error algorithm?
|
|
|
|
|
stratum+tcp://eth-eu1.nanopool.org:9999 how to start ETH+CKB?
|
|
|
|
|
What exchange can I sell on CPA?
|
|
|
|
|
