Here i attached the image... it shows ground on the left

https://imgur.com/a/FwE0RrF

Yes very similar, but one specific socket says 12v and one socket says ground, just wanted to know if it’s important....


And thank you everyone for helping me >.<

Yeah I got that, my question was about the small sockets on the board of the miner, one says ground and the other says 12v on each bay, whether those need to be plugged specifically to sockets on breakout board

On the 3 boards on the miner, each one has 3 sockets, one socket says ground, another 12v, so I assume the 3rd is 5v....on the breakout board, there one ground and one 12v, and I assume the other 4 are 5v....I know not to split the hashboard between power supplies, but if I put 2 hashboards to one power supply (6 cables) do I need to worry about designating the exact cables ground-ground and 12v-12v between the hashboard and breakout board

So basically my question is I have 3 ground sockets and 3 12v sockets going to 2 power supplies