Show Posts
|
Pages: [1]
|
Why do people dream of retiring and being "set for life" anyway. Its a pretty boring way to live.
Right now I work and I have to work when the boss says so. If I was retired and set for life , I could do what I want when I want
|
|
|
Can some one help me figure out what's wrong with my hash rate I was running one erupter blade and 3 of the usb erupters (333 mhash) and getting averaging about 10.5 Ghash. I have added one more blade and now getting only 16 to 17 Ghash per shift. Every time I check the blades configuration page they are all ways running a 99% plus and over 10 Ghash each. Any ideas what I should look for on my end ?
Are you getting a lot of rejected work or hardware errors (miscalculations) ? I'm not sure if the blade web interface shows hardware errors? [/quote] According to the bitminter live stats I have a rejection rate of 0.03% for currant round Total MHS: 10968 Received: 0000135770 Accepted: 0000135632 After 15 hours for one blade and Total MHS: 10435 Received: 0000304830 Accepted: 0000298874 for the other 1 day and 10 plus hours
|
|
|
Can some one help me figure out what's wrong with my hash rate I was running one erupter blade and 3 of the usb erupters (333 mhash) and getting averaging about 10.5 Ghash. I have added one more blade and now getting only 16 to 17 Ghash per shift. Every time I check the blades configuration page they are all ways running a 99% plus and over 10 Ghash each. Any ideas what I should look for on my end ?
|
|
|
ok I have tried connecting to slushes pool and the bitminter pool using both stratum proxy and bfgminer I have tried turning my firewall off. Any help would be great Thanks
this is what I get the the cmd window 014-01-11 05:24:50,530 ERROR protocol protocol.dataReceived # Processing of mes sage failed Traceback (most recent call last): File "stratum\protocol.pyo", line 185, in dataReceived File "stratum\protocol.pyo", line 216, in lineReceived 'rotocolException: Cannot decode message 'POST / HTTP/1.1 2014-01-11 05:24:50,535 INFO stats stats.print_stats # 2 peers connected, state changed 1 times 2014-01-11 05:24:50,540 INFO stats stats.print_stats # 3 peers connected, state changed 1 times 2014-01-11 05:24:50,552 ERROR protocol protocol.dataReceived # Processing of mes sage failed Traceback (most recent call last): File "stratum\protocol.pyo", line 185, in dataReceived File "stratum\protocol.pyo", line 216, in lineReceived 'rotocolException: Cannot decode message 'POST / HTTP/1.1 2014-01-11 05:24:50,559 INFO stats stats.print_stats # 2 peers connected, state changed 1 times 2014-01-11 05:24:50,562 INFO stats stats.print_stats # 3 peers connected, state changed 1 times 2014-01-11 05:24:50,572 ERROR protocol protocol.dataReceived # Processing of mes sage failed Traceback (most recent call last): File "stratum\protocol.pyo", line 185, in dataReceived File "stratum\protocol.pyo", line 216, in lineReceived 'rotocolException: Cannot decode message 'POST / HTTP/1.1 over and over and over
|
|
|
Ok I could use some help I have one blade hooked up via backplane with a 1000 watt power supply and I can not get it to mine. I have tried stratum proxy and bfgminer.
IP 192.168.1.201 ( Ip i have it set to ) Mask 255.255.255.0 Gateway 192.168.1.1 ( router ip) WEB Port 8000 Primary DNS 192.168.1.1 Secondary DNS 211.148.192.141 Ports 3333,3333 ( ports for bitminter) Server addresses 174.73.8.178,174.73.8.178 My ip user:pass my username and pass word
I even tried replacing the cable going from the blade to the router . What am I missing. Thanks in advance
try changing your server to the same IP range (192.168.1.xxx) I changed the server to 192.168.1.102 The ip address of my computer on the net work but still no luck I am running windows 7 64 bit
|
|
|
Ok I could use some help I have one blade hooked up via backplane with a 1000 watt power supply and I can not get it to mine. I have tried stratum proxy and bfgminer.
IP 192.168.1.201 ( Ip i have it set to ) Mask 255.255.255.0 Gateway 192.168.1.1 ( router ip) WEB Port 8000 Primary DNS 192.168.1.1 Secondary DNS 211.148.192.141 Ports 3333,3333 ( ports for bitminter) Server addresses 174.73.8.178,174.73.8.178 My ip user:pass my username and pass word
I even tried replacing the cable going from the blade to the router . What am I missing. Thanks in advance
|
|
|
I would be in for at least 50 depending on final cost of miner USB would be great. I would also have to pay in USD
Sorry payment is in BTC as that is what we have to pay Bitmain with. NP understood ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
I would be in for at least 50 depending on final cost of miner USB would be great. I would also have to pay in USD
|
|
|
It's called pump and dump for a reason just like penny stocks
|
|
|
I first heard about bitcoins on youtube
|
|
|
One day yes. If the demand for them keep up.
|
|
|
|