 Show Posts
|
|
Pages: [1] 2 »
|
|
anyone can help me this problem "could not connect to ethash pool asia1.ethermine.org:4444: an operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full". My rig run 2 or 3 day then get this problem, tk a lots
|
|
|
|
The new beta version is ready. You can download PhoenixMiner 6.0b from here: PhoenixMiner_6.0b_Windows.zipPhoenixMiner_6.0b_Linux.tar.gzTo check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvdia cards under Windows): File: PhoenixMiner_6.0b_Windows.zip
===================================
SHA-1: 38730224ef10963322b4d950a726438497ca66c1
SHA-256: f2c66cc5ba9ddac440a8206d1aa9becb74bd819b8811149501be35736589596e
SHA-512: 9b758939c87f56e83cf27d417238e4c4f4ace8049519715c6efef43892e94ffb0504e6037764986bc04fe4fa2124a39998399e480e55e3eca7c6461ea022a754
File: PhoenixMiner_6.0b_Linux.tar.gz
====================================
SHA-1: dbf2edbf964dd51fee5b2b6136213a7a81943fb9
SHA-256: 16cc12acaad323036e9cce87a8312f5d5cbdd665420f6d0c23d92cd22f0187da
SHA-512: d706a9f41f629418773135bfbbd58442a204841ee709a4e4b9b73c738ca0e07a4d90fbdb4b65a1a9be972c07407068f1c9bc162f4a2e9a2be87ab3120113a1a3
File: PhoenixMiner_NVRTC_Windows.zip
====================================
SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4
The new features in this release are: - Implemented partial unlocking of Nvidia LHR cards. By default they are detected automatically, and unlocked with the default unlock intensity (520). If you want to try higher (or lower) LHR unlock intensity, use the new -lhr command line parameter. For example -lhr 580 will try more aggressive unlocking than the default 520 unlock intensity. This parameter may (and should) be specified for each GPU separately as some GPUs can support higher unlocked speeds.
- If an Nvidia LHR card locks up because of high -lhr (the default 520 will work with most cards), the card will be unlocked again, and the -lhr value will be lowered if necessary
- Added support for new AMD Windows drivers up to driver version 22.2.3
- Multiple other small fixes and improvements
The updated list of known issues (driver incompatibilities, etc.) and workarounds: - The new Nvidia 3050 and 3080 12GB cards have different kind of LHR lock, which is not supported yet.
- The latest AMD Linux drivers 21.50 are not supported; the AMD Linux drivers 21.40.2 aren't verified also - this will be added in the final release of 6.0 next week.
- AMD Linux driver 21.40.1 has a bug preventing proper setting of clocks and voltages on older cards (RX4x0/RX5x0/Vega/RadeonVII). Given that these drivers are also usually slower than the older drivers for these cards, we recommend using Linux drivers 20.30 for anything older than RX6000 series.
- If you are using Linux drivers 21.40.1 with Radeon VII cards, you need to add the option -fpwm 1 in order to have proper fan control.
- AMD Linux drivers 21.40.1 has finally removed the requirement of PCIe atomics but there are problems when you try to mix Polaris (RX4x0/5x0) cards and Vega or newer cards on the same rig.
- Some Nvidia cards will report a lot of stale shares under Windows 11. Using the same driver version under Windows 10 resolves the issue.
For more robust integrity check, you can use our GPG public key, which was verifyed with ETH transaction from our main devfee account as explained here: https://bitcointalk.org/index.php?topic=2647654.msg56755869#msg56755869. Here are the signatures for the files in this release: Please disregard any posts with "new" versions of PhoenixMiner in this thread unless they are from our user account, and the files are hosted on our web server: https://phoenixminer.info/hi bro, can -mt on linux? |
|
|
|
From 19.X.X till now all amd gpu drivers support 8gb single memory allocation. You can try installing other driver but your chances are little. oh, tk u FIXED: You were right for the driver. Install driver 20.5.1 or later and you will be able to run -clKernel 3. It seems that 8GB allocation is introduced in 20.5.1 driver. I have installed 20.4.2 driver on my computer and got the same message as you "clKernel 3 is ignored", and my "Max allocation size" went down to 4244635648. tk u, love u so muchhhh... |
|
|
|
From 19.X.X till now all amd gpu drivers support 8gb single memory allocation. You can try installing other driver but your chances are little. oh, tk u |
|
|
|
- Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Please let us know if you have any problems or questions related to PhoenixMiner 5.7b. Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2. I'm on windows 10 20H2, Radeon Software version 21.6.1 I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion. Everything else is default. Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings. Thank you very much. I will look into that. Aaaand nothing changed. If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs. The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios. You are using very old drivers. Update the amd gpu driver. which version bro? im using 20.4.2 Increase your VRAM to (NUMBER_OF_GPUS+1)*8 GB. If you print the beginning of your log file I will tell you why clkernel 3 is ignored. 2021.08.04:19:05:12.583: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.04:19:05:12.583: main Cmd line:
2021.08.04:19:05:12.583: main config.txt: -pool asia1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo -amd -acm -tt 54 -clKernel 3 -fanmin 52 -fanmax 58 -cclock 1170 -cvddc 830 -mclock *:2040,1:2010,3:2020 -mvddc *:830,1:840 -mi 13 -rxboost 1 -straps 1 -mt 1
2021.08.04:19:05:14.338: main OpenCL driver version: 20.4.x
2021.08.04:19:05:14.366: main Available GPUs for mining:
2021.08.04:19:05:14.366: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.367: main ADL library initialized
2021.08.04:19:05:15.671: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.04:19:05:15.671: main Eth: primary pool: asia1.ethermine.org:4444
2021.08.04:19:05:15.671: main Starting GPU mining
2021.08.04:19:05:15.671: main Matched GPU1 to ADL adapter index 32 (method 1)
2021.08.04:19:05:15.699: main GPU1: AMD driver 20.4.2
2021.08.04:19:05:15.699: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.04:19:05:15.699: main GPU1: using AMD driver ver 20.4.2
2021.08.04:19:05:15.700: main Matched GPU2 to ADL adapter index 0 (method 1)
2021.08.04:19:05:15.728: main GPU2: AMD driver 20.4.2
2021.08.04:19:05:15.728: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.04:19:05:15.728: main GPU2: using AMD driver ver 20.4.2
2021.08.04:19:05:15.728: main Matched GPU3 to ADL adapter index 16 (method 1)
2021.08.04:19:05:15.759: main GPU3: AMD driver 20.4.2
2021.08.04:19:05:15.759: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.04:19:05:15.759: main GPU3: using AMD driver ver 20.4.2
2021.08.04:19:05:15.759: main Matched GPU4 to ADL adapter index 24 (method 1)
2021.08.04:19:05:15.789: main GPU4: AMD driver 20.4.2
2021.08.04:19:05:15.789: main GPU4: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.04:19:05:15.789: main GPU4: using AMD driver ver 20.4.2
2021.08.04:19:05:15.789: main Matched GPU5 to ADL adapter index 8 (method 1)
2021.08.04:19:05:15.819: main GPU5: AMD driver 20.4.2
2021.08.04:19:05:15.819: main GPU5: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.04:19:05:15.820: main GPU5: using AMD driver ver 20.4.2
2021.08.04:19:05:15.820: main Matched GPU6 to ADL adapter index 40 (method 1)
2021.08.04:19:05:15.849: main GPU6: AMD driver 20.4.2
2021.08.04:19:05:15.849: main GPU6: Created ADL monitor for adapter 40; overdrive version: 7 (7)
2021.08.04:19:05:15.849: main GPU6: using AMD driver ver 20.4.2
2021.08.04:19:05:15.913: hwmc GPU1: set VMEM timing level to 1
2021.08.04:19:05:16.023: hwmc GPU2: set VMEM timing level to 1
2021.08.04:19:05:16.129: hwmc GPU3: set VMEM timing level to 1
2021.08.04:19:05:16.236: hwmc GPU4: set VMEM timing level to 1
2021.08.04:19:05:16.342: hwmc GPU5: set VMEM timing level to 1
2021.08.04:19:05:16.448: hwmc GPU6: set VMEM timing level to 1
2021.08.04:19:05:16.599: hwmc GPU1: switching to alt fan control mode
2021.08.04:19:05:16.600: hwmc GPU1: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.606: hwmc GPU1: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.633: hwmc GPU1: set VMEM clocks to 2010 MHz (Vddc 840 mV)
2021.08.04:19:05:16.633: hwmc GPU2: switching to alt fan control mode
2021.08.04:19:05:16.634: hwmc GPU2: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.640: hwmc GPU2: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.647: hwmc GPU2: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.648: hwmc GPU3: switching to alt fan control mode
2021.08.04:19:05:16.648: hwmc GPU3: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.654: hwmc GPU3: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.659: hwmc GPU3: set VMEM clocks to 2020 MHz (Vddc 830 mV)
2021.08.04:19:05:16.661: hwmc GPU4: switching to alt fan control mode
2021.08.04:19:05:16.662: hwmc GPU4: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.670: hwmc GPU4: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.675: hwmc GPU4: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.676: hwmc GPU5: switching to alt fan control mode
2021.08.04:19:05:16.677: hwmc GPU5: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.688: hwmc GPU5: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU5: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU6: switching to alt fan control mode
2021.08.04:19:05:16.695: hwmc GPU6: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.703: hwmc GPU6: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.708: hwmc GPU6: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.759: wdog Starting watchdog thread
2021.08.04:19:05:16.759: main Eth: Connecting to ethash pool asia1.ethermine.org:4444 (proto: EthProxy)
2021.08.04:19:05:16.761: main GPU1: 53C 17% 33W, GPU2: 49C 17% 32W, GPU3: 50C 17% 33W, GPU4: 49C 17% 32W, GPU5: 51C 17% 33W, GPU6: 53C 17% 32W
GPUs power: 193.6 W
2021.08.04:19:05:16.823: eths Eth: Connected to ethash pool asia1.ethermine.org:4444 (172.65.231.156)
2021.08.04:19:05:16.823: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo"]}
2021.08.04:19:05:16.896: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.04:19:05:16.896: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.08.04:19:05:16.963: main Listening for CDM remote manager at port 3333 in read-only mode
2021.08.04:19:05:16.964: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd35ad1ac3a8d6c52be021ff0788f6e18cb76f3ea6d9163b36ad8c5efcfeff249","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:16.964: eths Eth: New job #d35ad1ac from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:16.965: GPU1 GPU1: Starting up... (0)
2021.08.04:19:05:16.965: GPU1 GPU1: Generating ethash light cache for epoch #431
2021.08.04:19:05:16.967: GPU2 GPU2: Starting up... (0)
2021.08.04:19:05:16.969: GPU3 GPU3: Starting up... (0)
2021.08.04:19:05:16.971: GPU4 GPU4: Starting up... (0)
2021.08.04:19:05:16.974: GPU5 GPU5: Starting up... (0)
2021.08.04:19:05:16.976: GPU6 GPU6: Starting up... (0)
2021.08.04:19:05:18.374: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xae9ee9fadfbbbe9ecbfd293fb52dce24bff17a37d3640b710c138cdb0101f143","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:18.374: eths Eth: New job #ae9ee9fa from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:21.326: GPU1 Light cache generated in 4.4 s (16.0 MB/s)
2021.08.04:19:05:21.677: GPU1 The option -clKernel 3 is ignored for GPU1
2021.08.04:19:05:21.796: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.08.04:19:05:21.796: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2021.08.04:19:05:22.237: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:22.237: GPU1 GPU1: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:22.319: GPU1 GPU1: Generating DAG for epoch #431
2021.08.04:19:05:22.635: GPU2 The option -clKernel 3 is ignored for GPU2
2021.08.04:19:05:23.188: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:23.188: GPU2 GPU2: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:23.250: GPU2 GPU2: Generating DAG for epoch #431
2021.08.04:19:05:23.586: GPU3 The option -clKernel 3 is ignored for GPU3
2021.08.04:19:05:24.138: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:24.138: GPU3 GPU3: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:24.201: GPU3 GPU3: Generating DAG for epoch #431
2021.08.04:19:05:24.248: GPU1 GPU1: DAG 15%
2021.08.04:19:05:24.372: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bb4a5dea15afce537ac20b510f4f3bc817a663979e5df9c6728ef647c953a59","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:24.372: eths Eth: New job #6bb4a5de from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:24.560: GPU4 The option -clKernel 3 is ignored for GPU4
2021.08.04:19:05:25.110: GPU4 GPU4: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:25.110: GPU4 GPU4: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:25.174: GPU4 GPU4: Generating DAG for epoch #431
2021.08.04:19:05:25.202: GPU2 GPU2: DAG 15%
2021.08.04:19:05:25.514: GPU5 The option -clKernel 3 is ignored for GPU5
2021.08.04:19:05:25.783: GPU1 GPU1: DAG 30%
2021.08.04:19:05:26.075: GPU5 GPU5: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:26.075: GPU5 GPU5: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:26.135: GPU3 GPU3: DAG 15%
2021.08.04:19:05:26.142: GPU5 GPU5: Generating DAG for epoch #431
2021.08.04:19:05:26.477: GPU6 The option -clKernel 3 is ignored for GPU6 Sorry, you can't run -clKernel 3. Your GPUs are some weird model that can't allocate more than 4GB per single memory block. Run clinfo from command prompt and you will find that your ' Max memory allocation:' is somewhere about 4GB. My RX570 has 'Max memory allocation: 8321499136' maybe due to driver?, i find st in this topic https://github.com/ethereum-mining/ethminer/issues/1966 |
|
|
|
- Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Please let us know if you have any problems or questions related to PhoenixMiner 5.7b. Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2. I'm on windows 10 20H2, Radeon Software version 21.6.1 I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion. Everything else is default. Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings. Thank you very much. I will look into that. Aaaand nothing changed. If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs. The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios. You are using very old drivers. Update the amd gpu driver. which version bro? im using 20.4.2 Increase your VRAM to (NUMBER_OF_GPUS+1)*8 GB. If you print the beginning of your log file I will tell you why clkernel 3 is ignored. 2021.08.04:19:05:12.583: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.04:19:05:12.583: main Cmd line:
2021.08.04:19:05:12.583: main config.txt: -pool asia1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo -amd -acm -tt 54 -clKernel 3 -fanmin 52 -fanmax 58 -cclock 1170 -cvddc 830 -mclock *:2040,1:2010,3:2020 -mvddc *:830,1:840 -mi 13 -rxboost 1 -straps 1 -mt 1
2021.08.04:19:05:14.338: main OpenCL driver version: 20.4.x
2021.08.04:19:05:14.366: main Available GPUs for mining:
2021.08.04:19:05:14.366: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.367: main ADL library initialized
2021.08.04:19:05:15.671: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.04:19:05:15.671: main Eth: primary pool: asia1.ethermine.org:4444
2021.08.04:19:05:15.671: main Starting GPU mining
2021.08.04:19:05:15.671: main Matched GPU1 to ADL adapter index 32 (method 1)
2021.08.04:19:05:15.699: main GPU1: AMD driver 20.4.2
2021.08.04:19:05:15.699: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.04:19:05:15.699: main GPU1: using AMD driver ver 20.4.2
2021.08.04:19:05:15.700: main Matched GPU2 to ADL adapter index 0 (method 1)
2021.08.04:19:05:15.728: main GPU2: AMD driver 20.4.2
2021.08.04:19:05:15.728: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.04:19:05:15.728: main GPU2: using AMD driver ver 20.4.2
2021.08.04:19:05:15.728: main Matched GPU3 to ADL adapter index 16 (method 1)
2021.08.04:19:05:15.759: main GPU3: AMD driver 20.4.2
2021.08.04:19:05:15.759: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.04:19:05:15.759: main GPU3: using AMD driver ver 20.4.2
2021.08.04:19:05:15.759: main Matched GPU4 to ADL adapter index 24 (method 1)
2021.08.04:19:05:15.789: main GPU4: AMD driver 20.4.2
2021.08.04:19:05:15.789: main GPU4: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.04:19:05:15.789: main GPU4: using AMD driver ver 20.4.2
2021.08.04:19:05:15.789: main Matched GPU5 to ADL adapter index 8 (method 1)
2021.08.04:19:05:15.819: main GPU5: AMD driver 20.4.2
2021.08.04:19:05:15.819: main GPU5: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.04:19:05:15.820: main GPU5: using AMD driver ver 20.4.2
2021.08.04:19:05:15.820: main Matched GPU6 to ADL adapter index 40 (method 1)
2021.08.04:19:05:15.849: main GPU6: AMD driver 20.4.2
2021.08.04:19:05:15.849: main GPU6: Created ADL monitor for adapter 40; overdrive version: 7 (7)
2021.08.04:19:05:15.849: main GPU6: using AMD driver ver 20.4.2
2021.08.04:19:05:15.913: hwmc GPU1: set VMEM timing level to 1
2021.08.04:19:05:16.023: hwmc GPU2: set VMEM timing level to 1
2021.08.04:19:05:16.129: hwmc GPU3: set VMEM timing level to 1
2021.08.04:19:05:16.236: hwmc GPU4: set VMEM timing level to 1
2021.08.04:19:05:16.342: hwmc GPU5: set VMEM timing level to 1
2021.08.04:19:05:16.448: hwmc GPU6: set VMEM timing level to 1
2021.08.04:19:05:16.599: hwmc GPU1: switching to alt fan control mode
2021.08.04:19:05:16.600: hwmc GPU1: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.606: hwmc GPU1: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.633: hwmc GPU1: set VMEM clocks to 2010 MHz (Vddc 840 mV)
2021.08.04:19:05:16.633: hwmc GPU2: switching to alt fan control mode
2021.08.04:19:05:16.634: hwmc GPU2: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.640: hwmc GPU2: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.647: hwmc GPU2: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.648: hwmc GPU3: switching to alt fan control mode
2021.08.04:19:05:16.648: hwmc GPU3: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.654: hwmc GPU3: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.659: hwmc GPU3: set VMEM clocks to 2020 MHz (Vddc 830 mV)
2021.08.04:19:05:16.661: hwmc GPU4: switching to alt fan control mode
2021.08.04:19:05:16.662: hwmc GPU4: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.670: hwmc GPU4: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.675: hwmc GPU4: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.676: hwmc GPU5: switching to alt fan control mode
2021.08.04:19:05:16.677: hwmc GPU5: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.688: hwmc GPU5: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU5: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU6: switching to alt fan control mode
2021.08.04:19:05:16.695: hwmc GPU6: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.703: hwmc GPU6: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.708: hwmc GPU6: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.759: wdog Starting watchdog thread
2021.08.04:19:05:16.759: main Eth: Connecting to ethash pool asia1.ethermine.org:4444 (proto: EthProxy)
2021.08.04:19:05:16.761: main GPU1: 53C 17% 33W, GPU2: 49C 17% 32W, GPU3: 50C 17% 33W, GPU4: 49C 17% 32W, GPU5: 51C 17% 33W, GPU6: 53C 17% 32W
GPUs power: 193.6 W
2021.08.04:19:05:16.823: eths Eth: Connected to ethash pool asia1.ethermine.org:4444 (172.65.231.156)
2021.08.04:19:05:16.823: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo"]}
2021.08.04:19:05:16.896: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.04:19:05:16.896: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}
2021.08.04:19:05:16.963: main Listening for CDM remote manager at port 3333 in read-only mode
2021.08.04:19:05:16.964: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd35ad1ac3a8d6c52be021ff0788f6e18cb76f3ea6d9163b36ad8c5efcfeff249","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:16.964: eths Eth: New job #d35ad1ac from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:16.965: GPU1 GPU1: Starting up... (0)
2021.08.04:19:05:16.965: GPU1 GPU1: Generating ethash light cache for epoch #431
2021.08.04:19:05:16.967: GPU2 GPU2: Starting up... (0)
2021.08.04:19:05:16.969: GPU3 GPU3: Starting up... (0)
2021.08.04:19:05:16.971: GPU4 GPU4: Starting up... (0)
2021.08.04:19:05:16.974: GPU5 GPU5: Starting up... (0)
2021.08.04:19:05:16.976: GPU6 GPU6: Starting up... (0)
2021.08.04:19:05:18.374: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xae9ee9fadfbbbe9ecbfd293fb52dce24bff17a37d3640b710c138cdb0101f143","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:18.374: eths Eth: New job #ae9ee9fa from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:21.326: GPU1 Light cache generated in 4.4 s (16.0 MB/s)
2021.08.04:19:05:21.677: GPU1 The option -clKernel 3 is ignored for GPU1
2021.08.04:19:05:21.796: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.08.04:19:05:21.796: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2021.08.04:19:05:22.237: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:22.237: GPU1 GPU1: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:22.319: GPU1 GPU1: Generating DAG for epoch #431
2021.08.04:19:05:22.635: GPU2 The option -clKernel 3 is ignored for GPU2
2021.08.04:19:05:23.188: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:23.188: GPU2 GPU2: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:23.250: GPU2 GPU2: Generating DAG for epoch #431
2021.08.04:19:05:23.586: GPU3 The option -clKernel 3 is ignored for GPU3
2021.08.04:19:05:24.138: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:24.138: GPU3 GPU3: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:24.201: GPU3 GPU3: Generating DAG for epoch #431
2021.08.04:19:05:24.248: GPU1 GPU1: DAG 15%
2021.08.04:19:05:24.372: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bb4a5dea15afce537ac20b510f4f3bc817a663979e5df9c6728ef647c953a59","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:24.372: eths Eth: New job #6bb4a5de from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:24.560: GPU4 The option -clKernel 3 is ignored for GPU4
2021.08.04:19:05:25.110: GPU4 GPU4: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:25.110: GPU4 GPU4: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:25.174: GPU4 GPU4: Generating DAG for epoch #431
2021.08.04:19:05:25.202: GPU2 GPU2: DAG 15%
2021.08.04:19:05:25.514: GPU5 The option -clKernel 3 is ignored for GPU5
2021.08.04:19:05:25.783: GPU1 GPU1: DAG 30%
2021.08.04:19:05:26.075: GPU5 GPU5: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:26.075: GPU5 GPU5: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:26.135: GPU3 GPU3: DAG 15%
2021.08.04:19:05:26.142: GPU5 GPU5: Generating DAG for epoch #431
2021.08.04:19:05:26.477: GPU6 The option -clKernel 3 is ignored for GPU6 |
|
|
|
PhoenixMiner 5.7b is officially released. You can find the download link and the checksums in the first post of this thread.
It is the same release as the one that was posted here as beta version, so if you are already running it, there is no need to upgrade.
Note that 5.7b supports the latest AMD Windows drivers 21.8.1 but it doesn't support the latest AMD Linux drivers 21.30. If you have AMD 6x00 card and you want to use Linux, you should use AMD drivers 21.20 but for any older AMD cards, you should stick with AMD drivers 20.30 (the latest stable PAL drivers without bugs).
Why -clgreen 1 didn't work? Miner just write that GPU0 is ignore -clgreen 1 option. Polaris cards RX 580 8Gb. me too, -clKernel 3 is ignore all gpu, hashrate = 0 when -mt 2. rx570 8G stock bios |
|
|
|
- Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Please let us know if you have any problems or questions related to PhoenixMiner 5.7b. Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2. I'm on windows 10 20H2, Radeon Software version 21.6.1 I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion. Everything else is default. Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings. Thank you very much. I will look into that. Aaaand nothing changed. If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs. The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios. You are using very old drivers. Update the amd gpu driver. which version bro? im using 20.4.2 |
|
|
|
- Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Please let us know if you have any problems or questions related to PhoenixMiner 5.7b. Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2. I'm on windows 10 20H2, Radeon Software version 21.6.1 I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion. Everything else is default. Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings. Thank you very much. I will look into that. Aaaand nothing changed. If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs. The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios. |
|
|
|
please help me to configure tmr, all cards are 8g polaris cards windows 10.
rx480 = 26mhs and rx 570=19mhs, for 570 it is very low,claymore was getting 30mhs on rx570
dont know how to do it, since claymore dead looking good miner please help me. please share bat file, thanks
same here, rx570 4g = 30mhs but rx570 8G = 29mhs, phoenix was getting 31mhs on 8G well you got good results. im happy for rx570 to get 28-29 how you getting 30mhs? im getting fucking 19mhs for rx570 core1150 mem=2050 core 1150 mem 2050 too, i download trm & run it, dont do anything else except change wallet i did not do nothing just download and run. it auto tunes to A275 something like that and final results are rx480 26mhs and rx 570 19mhs fucjing. or is it your cards are bios modded? i cant mod again these cards way to many. anyway back to phoenixminer looks like not many people are using this shit teamredminer anyway, no help from developer no manual nothing, this miner sucks Way to be a complete ingrate. TRM is great software. You wanna know what sucks..you as a miner. You blame and ridicule miner authorrs when it is your problem. TRM currently getting 30-31mhs on my 5xx series amd cards. I would help but your attitude is so bad i dont care what happens to you. Enjoy. yeah trm is great, can u help me? |
|
|
|
please help me to configure tmr, all cards are 8g polaris cards windows 10.
rx480 = 26mhs and rx 570=19mhs, for 570 it is very low,claymore was getting 30mhs on rx570
dont know how to do it, since claymore dead looking good miner please help me. please share bat file, thanks
same here, rx570 4g = 30mhs but rx570 8G = 29mhs, phoenix was getting 31mhs on 8G well you got good results. im happy for rx570 to get 28-29 how you getting 30mhs? im getting fucking 19mhs for rx570 core1150 mem=2050 core 1150 mem 2050 too, i download trm & run it, dont do anything else except change wallet |
|
|
|
please help me to configure tmr, all cards are 8g polaris cards windows 10.
rx480 = 26mhs and rx 570=19mhs, for 570 it is very low,claymore was getting 30mhs on rx570
dont know how to do it, since claymore dead looking good miner please help me. please share bat file, thanks
same here, rx570 4g = 30mhs but rx570 8G = 29mhs, phoenix was getting 31mhs on 8G |
|
|
|
Can't start
Fatal Error: debugger dedectet
Don't know that i have a debugger running?
u need reinstall window, driver. |
|
|
|
We are in the process of porting to Windows, from the top of my head the status was that it's building, I think we'll release some early betas soon so stay tuned!
wait for windows |
|
|
|
i think my one nvidia based rig is having a similar issue. it's running 2.8c.
it will run fine for 5-50+hrs, then suddenly it crashes, gets the "unspecified launch failure" error, and doesnt auto-restart. i can see that the watchdog triggered, but then the pheonixminer.exe crashes in windows and it hangs until i manually close it. i usually just reboot the system and it's fine. i run all default parameters except only running the -coin eth command, everything else is defaults.
my AMD based system on 2.8c is rock steady. runs for 300+ hrs and never crashes.
this is what's happening.  normally something like this would just trigger the watchdog, but it crashes in windows and just hangs. so it cant restart itself. same problem.. |
|
|
|
changed & still problem..
Try resetting your cards to default clocks. It might be overclock related. but claymore can run without problem. |
|
|
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. 2.8b has new kernals for the 570 remove the clkernal 2 or change it to 0 to see if that helps changed & still problem.. |
|
|
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G in your config if you add line... -allpools 1 does it help? 17618:11:47:02.397: main Phoneix Miner 2.8b Windows/msvc - Release 17618:11:47:02.397: main Cmd line: 17618:11:47:02.397: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd -allpools 1 17618:11:47:02.980: main Available GPUs for mining: 17618:11:47:02.980: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:02.980: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs 17618:11:47:03.005: main ADL library initialized still problem.. |
|
|
|
17617:12:22:59.708: main Phoneix Miner 2.8b Windows/msvc - Release
17617:12:22:59.708: main Cmd line:
17617:12:22:59.708: main config.txt: -pool eu1-etc.ethermine.org:4444 -pool2 us1-etc.ethermine.org:4444 -wal 0xd07e049700388d961068b92e28a9a86064b67986.letjen2 -clkernel 2 -amd
17617:12:23:00.302: main Available GPUs for mining:
17617:12:23:00.302: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.302: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
17617:12:23:00.330: main ADL library initialized
always stuck like that. From v6 to v8b, how to fix it? Let me know, tk u
So, version 2.6 was working properly or it had the same problem? Also, does the miner just freezes or crashes (exits)? same problem, miner exits. My rig nitro+ rx 570 8G |
|
|
|
|
