 Show Posts
|
|
Pages: [1]
|
|
@Phoenixminer how about the etchash compatibility with the latest version?
|
|
|
|
Hello. There is a problem: There are several rigs composition; win10, cards RX 580 8Gb, mother Asrock 81, driver 20.9.1 If after rebooting immediately turn on Phoenix v5.2c then the speed from the card is 30mh/s, and if you first run the nanominer v1.12.0 and then Phoenix, the speed on fenex rises more than 32mh/s and keeps stable. If the rig is reloaded, it will be 30mh/s again. To get 32mh/s, the operation with the launch of the nano miner must be repeated and then again it will be 32mh/s. Currently, no additional parameters are registered. If you pre-launch the nano miner only on one map, then the speed will increase only on one map. If you put strap 1 on the map where the speed is already 32mh/s, then the speed drops to 30 mh/s. What could be the problem? Which parameter should I add or change? This pattern always works on different rigs.
20.8.1 will work  |
|
|
|
|
My mixed rig with 3x P106, 4x1060 6Gb, 2xNitro RX580 8gb works well with 5.2a
Drivers:
20.8.1 and 456.38
|
|
|
|
|
@Phoenixminer: the 5.2a will compatible with the ETCHASH?
|
|
|
|
How to use the commands -straps, -vmt1, -vmt2, -vmt3, and -vmr on 1080Ti? I tried -nvmem 2 and the commands still are not recognized.
The miner is not recognizing the commands when I put in the bat file
I have the same problem too :/ |
|
|
|
|
Any info about the Gigabyte cards bios?
|
|
|
|
... I already use "-eres 0" command. I changed to mining Pirl so the 3G's works well. In january will reorganise my rigs. Ir will be profitable i keep the 3 3Gb 1060s if not replace them to 6gb cards |
|
|
|
... I use intergrated GPU for output |
|
|
|
... - Finally, please note that the versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. Currently ETC is on DAG 233, so in less than two weeks the old version of PhoenixMiner won't be able to create DAG or mine ETC - you have to upgrade to PhoenixMiner 4.0. For ETH there is more time as it is on DAG 225, and it won't be affected until the next year. As with ETC, you just need to upgrade to the latest version of PhoenixMiner in order to fix the problem.
I tried the new beta version, and I still got the "CudaProgram.cu:407 : out of memory " with my 1060 3gb cards if I start ETC mining. You have to use Windows 7 or Linux to mine ETC (and soon ETH) with 1060 3GB as Windows 10 "steals" part of the video RAM, making the allocation of enough memory for the DAG impossible even though the DAG is still way less than 3 GB. Under Win7 is the same problem :/ |
|
|
|
... - Finally, please note that the versions of PhoenixMiner before 4.0 only support DAG epoch up to 235. Currently ETC is on DAG 233, so in less than two weeks the old version of PhoenixMiner won't be able to create DAG or mine ETC - you have to upgrade to PhoenixMiner 4.0. For ETH there is more time as it is on DAG 225, and it won't be affected until the next year. As with ETC, you just need to upgrade to the latest version of PhoenixMiner in order to fix the problem.
I tried the new beta version, and I still got the "CudaProgram.cu:407 : out of memory " with my 1060 3gb cards if I start ETC mining. |
|
|
|
|
Here is some stats from my 1050TI's card:
1x ZOTAC GTX1050 TI 4GB Mini "ZT-P10510A-10L" 13,8MH/s with 80%Power/-300Core/+450Mem Phoenix 3.0c
2x Gigabyte GTX1050 TI 4GB OC "GV-N105TOC-4GD" 15,5MH/s with 80%Power/-300Core/+850Mem Phoenix 3.0c
2x MSI GTX1050 TI 4GB "LP GTX 1050 Ti 4GT LP" 14,9Mh/s with 80%Power/-300Core/+725Mem Phoenix 3.0c
All Micron with memories
2x ASUS GTX1050 4GB "PH-GTX1050TI-4G" 13,5-6MH/s with 80%Power/-300Core/+295Mem Phoenix 3.0c
2x ASUS GTX1050 TI 4GB "CERBERUS-GTX1050TI-O4G" 13,5MH/s with 80%Power/-300Core/+295Mem Phoenix 3.0c
2x MSI GTX1050 TI 4GB OC "GTX 1050TI 4GT OC" 13,5-6MH/s with 80%Power/-300Core/+295Mem Phoenix 3.0c
All Hynix with memories
All cards runs on:
ASRock - H81 PRO BTC R2.0
Intel G3220T
4GB DDR3 RAM
Zalman ZM700-LX
Samsung/WD 80GB HDD
|
|
|
|
Hi!
Yesterday I run my second, this with 8x ASUS GTX1050ti Phoenix (HYNIX) , ( my first rig have 9x amd rx580 )
I was expecting 15Mh/s ETH,
stock 12.3Mh/s,
MemClock +250 get 13,25Mh/s
I read here that you are using MemClock +700, + 900....
I can only raise it MemClock to +250, that is 3753Mhz.. If i set to +800, memclock is still 3753 in msi afterburner,
and get warrning in windows 10
- Application has been blocked from accesing Graphic hardware....
How can I solve the problem ?
How much hash can I expect with this card and hynix memory ?
Thankyou for help!
My configuration
- GIGABYTE GA-B250-FinTech MINING
-celeron g3930
-4Gram ( 40G virtual )
-SSD120Gb
-8x Asus GTX 1050Ti Phoenix
-Windows 10
-Claymore dual ( SOLO MINING ETH)
My 2 Phoenix edition cards around 13,51Mh/s with +295 MemClock. |
|
|
|
I tried that too, but with the same results  |
|
|
|
|
Anyone met the same problem, when OC the ASUS 1050TI's and the hashrate decreased?
Same problem with Claymore and Phoenix.
|
|
|
|
|
Hey guys!
I have some problems with my rig.
Gigabyte GA-P41-ES3G
Intel Core2Duo E8400 3GHz
3Gb DDR3 Ram
4x ASUS GTX 1050TI 4G with risers
ETH only mining
With Win7 64bit Prof SP1 runs Claymore v11 all cards around 12.3MH/s, if I overclocking them with MSI Afterburner, the hashrate decrease to 10-11MH/s, and the memory clock stays 3500Mhz even I add + or -
With Win10 64bit Prof start Claymore, the memory stays around 400Mhz, the CPU works well perfectly (around 1800Mhz), and the hashrate 1.2-1.3MH/s
I tried with other 3 rigs but with the same results, and older versions of Claymore but no changes.
Anyone met with the same problem?
Thanks!
|
|
|
|
|
