 Show Posts
|
|
Pages: [1] 2 3 4 5 »
|
Hi,
one little sutpid question.
Is it possible to send funds > 500 from a masternode, and the masternode will running without errors?
Like my MN Staked 10 Crave and i will send this to an other wallet.
You have to activate coin feature "expert" Settings > options > display Then when you send you will see a box that is called inputs, hit that box and select the rewards and not the 500. Thats it. Remember you need to fully unlock the wallet and the restart it when you finished to make it work (masternode) and how do i do this on cmd line, my node is on vps Oh, i thought you had it on windows. I dunno how its done on command like, try and go to the slack and ask, im sure someone will be able to help you there. ok thx.  |
|
|
|
Hi,
one little sutpid question.
Is it possible to send funds > 500 from a masternode, and the masternode will running without errors?
Like my MN Staked 10 Crave and i will send this to an other wallet.
You have to activate coin feature "expert" Settings > options > display Then when you send you will see a box that is called inputs, hit that box and select the rewards and not the 500. Thats it. Remember you need to fully unlock the wallet and the restart it when you finished to make it work (masternode) and how do i do this on cmd line, my node is on vps |
|
|
|
|
Hi,
one little sutpid question.
Is it possible to send funds > 500 from a masternode, and the masternode will running without errors?
Like my MN Staked 10 Crave and i will send this to an other wallet.
|
|
|
|
|
Hi, one stupid question:
Ho do i configure this?
Now you can move your masternore reward to another address.
|
|
|
|
Thank's the add from: externalip=xx.75.141.164
port=9999
and edit to masternodeaddr=xx.75.141.164:9999
had solve this problem. |
|
|
|
Hi i've problems to setup my MN on my server If i ty to use some Ports i get this error: 2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:50423'
2017-07-29 07:19:39 connect() to 62.75.141.164:50423 failed after select(): Connection refused
2017-07-29 07:19:39 CActiveMasternode::ManageStatus() - not capable: Could not connect to XX.75.141.164:50423
This ports are all open... If i use higher Ports like 80423 i get this: 2017-07-29 07:20:29 addr XX.75.141.164:80423
2017-07-29 07:20:29 CActiveMasternode::ManageStatus() - Checking inbound connection to 'XX.75.141.164:0'
Masternode would start, but i think this is not right. seems like an Integer overflow on the Port because its markt "0" I'had run the node for 1 day but no income an i don't see the node on the MN-List. {
"version" : "v2.1.0.0-60025",
"protocolversion" : 60025,
"walletversion" : 60000,
"balance" : 500.00000000,
"darksend_balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 0.00000000,
"blocks" : 809899,
"timeoffset" : 0,
"moneysupply" : 1324174.00000000,
"connections" : 2,
"proxy" : "",
"ip" : "XX.75.141.164",
"difficulty" : 81150.71818611,
"testnet" : false,
"keypoololdest" : 1501257658,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"unlocked_until" : 0,
"errors" : ""
}
The IP is also ok by the Node. What could the problem be???  |
|
|
|
after 2 years i remember that i'fe supported crave. I i'm happy to see my crave are alive again. And i will support it now again. |
|
|
|
@yoda1204, @CDarvin81 what is your redis version on server? make sure yo have >=2.6 oh and i'm back to scene, expect something big soon! yes i've try any version for redis also self install 3.++ But redis did'nt seem's to be the problem. I've the problem that my miner can't connect. I've tryed to bind 0.0.0.0 also VPS IP also domain name but i'm not able to connect. I've tryed only some alts like EMC2 or DGB to run. Possible in my holiday i solve that thing. at the moment i run @ redis-cli 3.0.6 |
|
|
|
@yoda1204, @CDarvin81 what is your redis version on server? make sure yo have >=2.6 oh and i'm back to scene, expect something big soon! yes i've try any version for redis also self install 3.++ But redis did'nt seem's to be the problem. I've the problem that my miner can't connect. I've tryed to bind 0.0.0.0 also VPS IP also domain name but i'm not able to connect. I've tryed only some alts like EMC2 or DGB to run. Possible in my holiday i solve that thing. |
|
|
|
I don't know why the users didn't mine on p2pool. They better mine on zentral pools  I've tryed to setup a new node but i didn't get it to work. Any tutorial for me? |
|
|
|
I have Ubuntu 16.04, build from 0.2.5 - beta without errors test pass. But if start server, redis not works -- [Error] [RedisProvider] [Bitcoin] Redis storage initialization failed: 127.0.0.1:6379 this metod is not implemet in this class. All config is good, mysql works . Any idea?
Hi, i had the same error. I tryed different verisons of redis... Have you find some work around? I've tested now on Windows. Mining local works fine but remote didn't. The Problem with Redis had i solved with out commet the version Check in: \src\CoiniumServ\Persistance\Providers\Redis\RedisProvider.cs // check the version
//var version = GetVersion();
//if (version < _requiredMinimumVersion)
// throw new Exception(string.Format("You are using redis version {0}, minimum required version is 2.6", version));
//_logger.Information("Redis storage initialized: {0:l}:{1}, v{2:l}.", _config.Host, _config.Port, version);
I think the version Check was a Problem on Linux, Windows works fine withou change. But i cant connect my miner to the Server on Linux, website ok. config for Stratum is: "stratum": {
"enabled": true,
"bind": "",
"diff": 16,
"vardiff": {
"enabled": true,
"minDiff": 8,
"maxDiff": 512,
"targetTime": 15,
"retargetTime": 90,
"variancePercent": 30
}
this settings works only local on windows... Any Idea? |
|
|
|
I have Ubuntu 16.04, build from 0.2.5 - beta without errors test pass. But if start server, redis not works -- [Error] [RedisProvider] [Bitcoin] Redis storage initialization failed: 127.0.0.1:6379 this metod is not implemet in this class. All config is good, mysql works . Any idea?
Hi, i had the same error. I tryed different verisons of redis... Have you find some work around? |
|
|
|
So...
The newest version from github didn't crashs again.
The Problem ist what is the official chain?
Blockexplorers chains are much bigger the any of ny chains.
Is the fork done or are the new versions <50%?
No one is following my son  All services, blockchain explorers and exchanges are still on the old chain! Ok thanks... so i will switch back... |
|
|
|
|
So...
The newest version from github didn't crashs again.
The Problem ist what is the official chain?
Blockexplorers chains are much bigger the any of ny chains.
Is the fork done or are the new versions <50%?
|
|
|
|
Hi I have 2 nodes the newest node with the newest code from github runs on block > 188001 So i try to compile the other new... {
"version" : "v2.0.0.0-g32a928e Quantum Loop",
"protocolversion" : 70000,
"walletversion" : 60000,
"balance" : 0.00000000,
"newmint" : 0.00000000,
"stake" : 114.00693205,
"blocks" : 188005,
"timeoffset" : 0,
"moneysupply" : 702408.50000000,
"connections" : 3,
"proxy" : "",
"ip" : "62.75.187.41",
"difficulty" : {
"proof-of-work" : 115.31111462,
"proof-of-stake" : 0.48858223
},
"testnet" : false,
"keypoololdest" : 1429791961,
"keypoolsize" : 101,
"paytxfee" : 0.00001000,
"mininput" : 0.00000000,
"errors" : ""
}
|
|
|
|
|
Hi.
After the release of the new source i was able to compile rhe new wallet.
But now if i try to run these in the update folder i get this:
vagrant@precise32:~/update/crave/src$ ./craved
./craved: symbol lookup error: ./craved: undefined symbol: secp256k1_start
Any idea?
|
|
|
|
Hi @all.
I have a problem whith my try to compile the new wallet for my MN here the error msg:
key.cpp:711:70: error: 'class {anonymous}::CSecp256k1Init' has no member named 'ctx'
key.cpp: In member function 'bool CPubKey::Derive(CPubKey&, unsigned char*, unsigned int, const unsigned char*) const':
key.cpp:730:69: error: 'class {anonymous}::CSecp256k1Init' has no member named 'ctx'
make: *** [obj/key.o] Error 1
Has someone a idea to solve. ..
Is the same environment which i has comipled the old sozrce....
Thanks.
secp256k1 Error And how can i solve this? Is there any howto? What OS and environment are you using? Are trying to compile craved or the qt wallet? Try to compile on a umix one time on a precise32 linux box other time on Ubuntu 12x On every environment the same error... I dont understand these because i've compiled the first source on these systems.... |
|
|
|
Hi @all.
I have a problem whith my try to compile the new wallet for my MN here the error msg:
key.cpp:711:70: error: 'class {anonymous}::CSecp256k1Init' has no member named 'ctx'
key.cpp: In member function 'bool CPubKey::Derive(CPubKey&, unsigned char*, unsigned int, const unsigned char*) const':
key.cpp:730:69: error: 'class {anonymous}::CSecp256k1Init' has no member named 'ctx'
make: *** [obj/key.o] Error 1
Has someone a idea to solve. ..
Is the same environment which i has comipled the old sozrce....
Thanks.
secp256k1 Error And how can i solve this? Is there any howto? |
|
|
|
Hi @all. So that we start new i'll resume my work on cravedigger. To integrate more coins, also i'll get some cash to spend it for the cravedigger project. So i will be able to support langer oders. Also i'll be develop a auto exchange function to automate the refill of cravedigger service. I would do more, but im not a c developer... If there is a desinger they could help to pimp the layout pls say hi... Service is live @ http://cravedigger.craved-net.netCheers. |
|
|
|
|
Oh man,
why you feed the trolls. ..
some restarts of the wallet and the sync goes on.
|
|
|
|
|
