Yes, I can report as well that the Corsair H100i stand offs are too high. My Habanero came in today (yes!) but as I started installing the H100i, the CPU block did not fix properly. Going to go try to find something that will work for myself. Just beware if you order this water cooler you may need to use some different stand offs.
Have received my 2 Habanero boards.
Tried to fit the Corsair H100i and it seems the 115x stand offs are too high. The CPU block has about 5mm of space to move up and down. The LGA2011 stand off did the trick but had to source 4 separate 4mm nuts to screw it down. Still to be tested.
While I was sourcing the 4mm nuts, I also started setting up the XSPC Water Cooling Kit for the 2nd board.
More pics can be found here:
http://imgur.com/a/SMBJPWhile I have both boards ready with water coolers installed and powered up, I keep getting the following errors on cgminer:
[2014-06-10 23:21:10] Hashfast detect (2:17) failed to initialise (incorrect device?)
[2014-06-10 23:21:15] USB init, open device failed, err -3, you don't have privilege to access - HFA device 2:17-i1
ha and it just occurred to me that I didn't run cgminer with sudo .. this may be the cause of my errors.. will attempt to run again later tonight after work. Silly me.
Back to work i guess,
QG
Show Posts
