 Show Posts
|
|
Pages: [1]
|
|
hello everybody ... do you know where to buy a GekkoScience R606 Terminus in Europe?? thank you all and good weekend
|
|
|
|
|
hello everybody ... do you know where to buy a GekkoScience R606 Terminus in Europe?? thank you all and good weekend
|
|
|
|
Thanks for the answer .. another question ...
is it possible to connect to any pool and undermine any coin with the same "algo scrypt" ??
Thanks in advance....
I do not know what you mean by undermine you can mine any coin/pool that is rhe same algo - which for this miner is scrypt ok ,thanks...and a good weekend |
|
|
|
hello dear, I have the possibility to buy it in EU for 350 ..
I wanted to know if there is really the possibility of earning something ... as with me the cost of the current is 0.21 (kw / h) and therefore I have to be on very low hardware as consumption, for home, I wanted to know if it's worth it or not .. thanks to all .. hello forum ...
this is a hobby miner not a money maker. The only real chance of making money with it is if you solo mine and get lucky enough to hit a block. mining with it in a pool will not make your ROI unless you mine now and hold the coins until they later increase in value. I know I know... now as a hobby, I am undermining with a gekkoscience 24 gh / s "algo sha-256" and I am undermining various coins still collectable with my "little power". Thanks for the answer .. another question ... is it possible to connect to any pool and undermine any coin with the same "algo scrypt" ?? Thanks in advance.... |
|
|
|
hello dear, I have the possibility to buy it in EU for 350 ..
I wanted to know if there is really the possibility of earning something ... as with me the cost of the current is 0.21 (kw / h) and therefore I have to be on very low hardware as consumption, for home, I wanted to know if it's worth it or not .. thanks to all .. hello forum ...
If you want a way to slowly collect litecoin without buying it, and don't care about burning a lightbulb 24/7 to do it, then yes right now is the best time to be mining since difficulty is almost half of what it was during it peak (and you earn almost as much litecoin as you would have pre-halving). If you only care about fiat, and dumping crypto for fiat so you can 'ROI' then no this is not for you. thanks for the reply, but there is also the possibility to connect to any pool and undermine any crypto with the same "algo scrypt" Thanks in advance |
|
|
|
|
hello dear, I have the possibility to buy it in EU for 350 ..
I wanted to know if there is really the possibility of earning something ... as with me the cost of the current is 0.21 (kw / h) and therefore I have to be on very low hardware as consumption, for home, I wanted to know if it's worth it or not .. thanks to all .. hello forum ...
|
|
|
|
|
hello dear, I have the possibility to buy it in EU for 350 ..
I wanted to know if there is really the possibility of earning something ... as with me the cost of the current is 0.21 (kw / h) and therefore I have to be on very low hardware as consumption, for home, I wanted to know if it's worth it or not .. thanks to all .. hello forum ...
|
|
|
|
Hi guys, I'm trying to become a digibyte "full node". my notebook where I'm launching the "digibyte core wallet" uses as the operating system Lubuntu. is since yesterday that I'm trying to download all the blockchains, but I do not know why sometimes the program closes by just killing the process and retouching to launch it manually and it still takes us longer. In the terminal where I throw ./digibyte-qt, when it closes, this comes out: "terminate called without an active exception" "Canceled (core dump created)" some remedy  however I am following this guide: - https://www.digibyteguide.com/user-guides/running-a-full-digibyte-node/One thing, but what benefits are there for being a full node is there any reward for this can it be a valid alternative to mining Thank you all... Ultimate64 |
|
|
|
Hello everyone, it's about an hour or so that I'm on this pool .. I have 1x gekkoscience 2pac At the beginning I started with difficulty 4000 (4K) then the pool brought me "Diff 40" and finally "Diff 20" .. what difficulties can I enter for my hardware ? thanks to all, greetings ultimate64 All of that is outlined in the official support thread- https://bitcointalk.org/index.php?topic=1764803.0Add this line to have it run at 200 Mhz but watch out it will get hot if you don't have a fan blowing on it...lol --gekko-2pac-freq 200 thanks,i knows.. now i have runs to 175Mhz with a good fan cool |
|
|
|
Hello everyone, it's about an hour or so that I'm on this pool .. I have 1x gekkoscience 2pac At the beginning I started with difficulty 4000 (4K) then the pool brought me "Diff 40" and finally "Diff 20" .. what difficulties can I enter for my hardware ? thanks to all, greetings ultimate64 All of that is outlined in the official support thread- https://bitcointalk.org/index.php?topic=1764803.0but since it is inherent in this pool, it is better to talk about it here You don't need to enter any for your hardware, you just let the pool automatically adjust it. so if the pool leads me to difficulty 15 I have to leave so ... ok, thanks And why would you do that?  Do you actually understand what it is, these shares and difficulty for your miner? It's to keep flow of shares constant, so pool communicates with you efficiently and your hashrate estimation is more accurate. I finally someone told me everything,thanks |
|
|
|
Any black stick with a BSD serial is a proper stock stick sent to bitshopper.de for resale. The green stick, serial 22394, is not a seconds stick but I don't know how you ended up with it in UK unless you bought it second-hand. Either that or I have a reseller breaking the rules.
Let me ask again, who did you buy them from?
My stick,black edition bitshopper.de, i buy on amazon for 99 |
|
|
|
Hello everyone, it's about an hour or so that I'm on this pool .. I have 1x gekkoscience 2pac At the beginning I started with difficulty 4000 (4K) then the pool brought me "Diff 40" and finally "Diff 20" .. what difficulties can I enter for my hardware ? thanks to all, greetings ultimate64 All of that is outlined in the official support thread- https://bitcointalk.org/index.php?topic=1764803.0but since it is inherent in this pool, it is better to talk about it here You don't need to enter any for your hardware, you just let the pool automatically adjust it. so if the pool leads me to difficulty 15 I have to leave so ... ok, thanks |
|
|
|
Hello everyone, it's about an hour or so that I'm on this pool .. I have 1x gekkoscience 2pac At the beginning I started with difficulty 4000 (4K) then the pool brought me "Diff 40" and finally "Diff 20" .. what difficulties can I enter for my hardware ? thanks to all, greetings ultimate64 All of that is outlined in the official support thread- https://bitcointalk.org/index.php?topic=1764803.0but since it is inherent in this pool, it is better to talk about it here |
|
|
|
Hello everyone ... who can explain to me how the problem of the difficulty works and how can I set a good compromise for my hardware ?? On ckpool I started with difficulty 4000 (4K) but the pool automatically set me to 40 and then to 20 .... so what should I do?? thanks,ultimate64 You probably selected a port with a vardiff (variable difficulty). If the pool offers a fix diff port you need to select that port & set your diff to reflect an optimal diff. This would require some experimentation. All that being said, unless you have a specific reason to set fix diff, most pools operate with a very good variable diff & will yield the best results. ok thank, but there is more or less a right set ? |
|
|
|
Hello everyone, it's about an hour or so that I'm on this pool .. I have 1x gekkoscience 2pac At the beginning I started with difficulty 4000 (4K) then the pool brought me "Diff 40" and finally "Diff 20" .. what difficulties can I enter for my hardware ? thanks to all, greetings ultimate64 |
|
|
|
Hello everyone ... who can explain to me how the problem of the difficulty works and how can I set a good compromise for my hardware ?? On ckpool I started with difficulty 4000 (4K) but the pool automatically set me to 40 and then to 20 .... so what should I do?? thanks,ultimate64 |
|
|
|
Hello miners friends, today I set up and launched USB STICK on my Acer AspireONE with Lubuntu and I'm connected to SlushPool.
I must say that for now everything is ok, as I'm new to the world of miners I wanted some tips on how I could set CGMINER
there are two settings that i can think of freq & voltage. are you starting your miner with a start.bat file? paste the command line here that you are using. regards zac How can I raise the frequency from file? and how can I create my start.bat file? now I throw everything manually ... thanks, ultimate. |
|
|
|
|
Hello miners friends, today I set up and launched USB STICK on my Acer AspireONE with Lubuntu and I'm connected to SlushPool.
I must say that for now everything is ok, as I'm new to the world of miners I wanted some tips on how I could set CGMINER
|
|
|
|
|
