 Show Posts
|
|
Pages: [1]
|
Thanks for your help guys - going to have a play with the settings. I know I'm not the only one with this problem so will post my results.
I've removed catalyst 14 and gone back to 13.11 and its not made a difference. Will probably try going back to 12 next if I can find a copy. These cards are mining on standard scrypt coins fine.
I'm using windows 7 btw.
Removing 14 and going back to 13.11 is not enough. If you've already remover 14 and installed 13.11 you need to uninstall 13.11, reboot, run Driver Sweeper to remove all the junk left over, reboot, reinstall 13.11, reboot. That should eliminate the drivers as your problem. Didn't need to do all that, just ran the catalyst uninstaller. Turned out the problem was to do with the worksize (changing 256 to 64 fixed it). |
|
|
|
|
Ok worked out the problem - changing the worksize to 64 (from 256) fixed it. Now running really stable.
Thanks for your help guys.
|
|
|
|
|
Thanks for your help guys - going to have a play with the settings. I know I'm not the only one with this problem so will post my results.
I've removed catalyst 14 and gone back to 13.11 and its not made a difference. Will probably try going back to 12 next if I can find a copy. These cards are mining on standard scrypt coins fine.
I'm using windows 7 btw.
|
|
|
|
Anyone have a solution?
at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff... waltsmith Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas? you're getting a lot of hardware errors, change the config I know I'm getting H/W errors, I posted my config earlier. How should I change the config? I've tried a few things and its not making a difference. |
|
|
|
I cant get the miner working with my 2 x Windforce 280x. Running Catalyst 13.11.
Heres my config:
set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://utc.greekpool.eu:3337 -u myusername -p mypw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --expiry 1 --queue 0 --scan-time 1 --intensity 10 --gpu-engine 1050 --worksize 256 -g 2 --thread-concurrency 8192
Its hashing fine but there are no WU produced.
Anyone have a solution?
at the Diff it is at now try getting rid of the Expiry queue scantime stuff and deal with a few percent rejects...you arent giving your worker time to complete any work at this diff... waltsmith Thanks for the info. I removed all that bit and still not getting any WU. Anyone have any ideas?  |
|
|
|
|
I cant get the miner working with my 2 x Windforce 280x. Running Catalyst 13.11.
Heres my config:
set GPU_MAX_ALLOC_PERCENT 100
set GPU_USE_SYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://utc.greekpool.eu:3337 -u myusername -p mypw --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --expiry 1 --queue 0 --scan-time 1 --intensity 10 --gpu-engine 1050 --worksize 256 -g 2 --thread-concurrency 8192
Its hashing fine but there are no WU produced.
Anyone have a solution?
|
|
|
|
 USDE.POOLIGANS.COMWe are open for pre registrations and will open for miners at the designated time at launch. We have lot of capacity and we want more people to mine with us! - Dedicated hardware
- Split and clustered backend; sql-clustered, web-clustered and dedicated stratum servers
- Low latency, high bandwith connection
- 24/7
- Actively maintained and monitored pool
- EU based server- 1% Fee - PROP system Please post your username that you pre-registered in this thread, and you will get 0% fee.If you live in some timezone where you will not be awake for launch set up your cgminer with our pool as primary and use your favorite/current alt coin pool as secondary, you will automatically connect and start mining at our pool when it becomes operational at launch. Go to our site and reigster, make your workers and edit your cgminer.conf like this: (replace USERNAME.1 with your worker name and PASS with your chosen worker password) {
"pools" : [
{
"url" : "stratum+tcp://usde.pooligans.com:3331",
"user" : "USERNAME.1",
"pass" : "PASS"
},
{
"url" : "stratum+tcp://whateverpool.somecoin.com:3333",
"user" : "USERNAME.1",
"pass" : "PASS"
}
],- Pooligans staff Signed up Username: scottycam |
|
|
|
http://qqcoin.cryptovalley.comPPLNS
1% Fee
VARDIFF
Fast and reliable servers
Quote this message and post your username to have 0% fee for your account for life Username is: pedperson Thanks! |
|
|
|
5 QQC sent
And the first 10 person who post QQC wallet address after this one, gets 5 QQC as well.
Enjoy~Be QUICK~
Thanks! Qh3NQtSrTsyoTM5Q1UyLJd1WbmBp7TF8z9 |
|
|
|
I'm mining on http://qqc.cipherpool.com/ pool at a rate of around 8500 KH/s and am getting around 100 coins every 40 minutes. Is this the expected correct rate? Also I have 1500 QQ coins for sale, PM me with BTC/DOGE offers. |
|
|
|
|
Thanks!
Qh3NQtSrTsyoTM5Q1UyLJd1WbmBp7TF8z9
|
|
|
|
|
Having just joined I can see why you have this rule but can you not make it more obvious during the registration period?
Took me ages to find out why I couldn't do anything - I thought I missed a registration confirmation email or something.
|
|
|
|
|
