 Show Posts
|
|
Pages: [1] 2 3 4 5 6 7 »
|
Уважаемые знатоки, у меня для вас родилась загадка
Сложность - практически изи
Вопрос: если представить монету, на одной стороне которой изображен/написано "Bitcoin", то что будет на другой?
Правильный ответ получит 1 мерит.
1 |
|
|
|
Guys, is there some way to integrate MQTT devices in AM? We have some MQTT powered SONOFF POW switches for power control and rigs monitoring, it would be great if we have power consumption information in progress list and a buttons "Power on"/"Power off"
There's no native support for MQTT, but you could construct some interface for AM to use. When it comes to rules actions, you have a few options like a custom C# action, email, SMS, telegram, executable, SSH, or webhook. You might be able to piece something together from an If This Then That website with the webhook option. I see it's possible to use webhooks with device with JSON API enabled, but this is for monitoring. How can i make a button, or an option in rightmouseclick menu for power off/on device via remote relay? Is it possible? I think the whole point of using something like AM is that it can automate some of these things for you. You setup a rule with some trigger... like maybe a rig that hasn't increased it's Accepted rate in X minutes... so that would tend to mean that it's offline, then the action would be a webhook with some POST data to the IOT device that does some action.... like a power off and then power on? Or if you have an executable file, you can have it run a batch script to run some program like: devicesoftware.exe -poweroff -IP 192.168.0.X TIMEOUT /t 5 devicesoftware.exe -poweron -IP 192.168.0.X I'm just spit-balling some ideas here. Looks interesting! But anyway we need some webhooks implementation in progress customization. I think it's great to have an ability to show some inbound JSON data from 3dparty applications in progress list. It can be power consumtion, for example or external temperature from additional sensors |
|
|
|
Guys, is there some way to integrate MQTT devices in AM? We have some MQTT powered SONOFF POW switches for power control and rigs monitoring, it would be great if we have power consumption information in progress list and a buttons "Power on"/"Power off"
There's no native support for MQTT, but you could construct some interface for AM to use. When it comes to rules actions, you have a few options like a custom C# action, email, SMS, telegram, executable, SSH, or webhook. You might be able to piece something together from an If This Then That website with the webhook option. I see it's possible to use webhooks with device with JSON API enabled, but this is for monitoring. How can i make a button, or an option in rightmouseclick menu for power off/on device via remote relay? Is it possible? |
|
|
|
|
Guys, is there some way to integrate MQTT devices in AM? We have some MQTT powered SONOFF POW switches for power control and rigs monitoring, it would be great if we have power consumption information in progress list and a buttons "Power on"/"Power off"
|
|
|
|
|
Patrike, is there some way to integrate MQTT devices in AM? We have some MQTT powered SONOFF POW switches for power control and rigs monitoring, it would be great if we have power consumption information in progress list and a buttons "Power on"/"Power off"
|
|
|
|
e9+ fw V6.2.20.42 working 12 miniutes and: "Shutdown: Your license has expired, please contact the manufacturer!!!" wtf?  I am getting same issue now on my miners Did you find a solution to this? You need any 6.0.x.x firmware, not 6.2.x.x. So you need to upgrade fw. You can try to do it via web interface or from managemant utility. Somehow its uprades, sometimes not )))) If not, try to change source bank. |
|
|
|
Patrike, is there any way to change miner type from Managed Miner to Managed Profit Miner and back? Some tips?
It would be extremely helpful.
That is not unfortunately not possible. For a Managed Miner you can use template to switch between different configurations in an efficent way, but the Managed Profit Miners are a bit too different for this concept to work. As i see, all needed data is present in both types of a miners for another...It would be great to have a "Convert to manage miner"/"Convert to profit miner" button for each miner! Think about it! Right now, i need to remove miner and create needed after that, with the same IP address and worker name . So i'm loosing all history and settings. It doesn't make sense. |
|
|
|
|
Patrike, is there any way to change miner type from Managed Miner to Managed Profit Miner and back? Some tips?
It would be extremely helpful.
|
|
|
|
|
Is there any way to change miner from Managed Miner to Managed Profit Miner and back? It would be extremely helpful.
|
|
|
|
e9+ fw V6.2.20.42 working 12 miniutes and: "Shutdown: Your license has expired, please contact the manufacturer!!!" wtf? Mine came with the 42 software and they've been up since I got them, two days ago, no issues. V6.2.20.42 or V6.0.20.42 ? |
|
|
|
e9+ fw V6.2.20.42 working 12 miniutes and: "Shutdown: Your license has expired, please contact the manufacturer!!!" wtf? |
|
|
|
If you can't use more than 1 instance of AM security option is useless. At least you need to make authorization on web page.
The multi-user feature is mainly intended to be user with the web interface, where you can have different users logging in and only see their own miners. I run AW using admin account and webpage doesn't prompt me a login/password - just showing all of rigs. How can i have authorization on web page?Seems like my licence can't do it )))) |
|
|
|
|
If you can't use more than 1 instance of AM security option is useless. At least you need to make authorization on web page.
|
|
|
|
1 out of 1 broken?  |
|
|
|
|
Any feedback guys? Is shipping fast? Is possible to get broken miner right from the box?
|
|
|
|
https://pasc.suprnova.cc ONLINE updated sgminer with pascal support at your service!  280X - 550Mh 470 - 620MH All stable so far
|
|
|
|
Seems like ocminer stuck with pascalcoin... Unable to connect to wallet RPC service: RPC call did not return 200: HTTP error: 0 - JSON Response: []
|
|
|
|
You have sensors in each gpu.
And sensors plus cables would make device more expensive.
I Wanted to be as much cheap as i can but i also i didnt want to make cheap chineese shit so it would broke in a year. Accually i even did gold plated pcbs to be more durable.
Anyway tell me how temperature sensors would help ?
I am really open to ideas and if more people say thet they wany ti have temperature sensors then i would do it.
I have sensors for my PSU (server's type) and for ambient temperature in room, where hardware is placed. Helpful for autobalance aircondtioners...  |
|
|
|
|
