5 Bitmain Antminer L3+ 504 MH/s with APW3++ 1600w Power Supply
These units have had their voltages tuned and draw 675watts @120v in a 20degree C room, they will be slightly more efficient @240V (my watt meter only works on 120V)
They hash at 504 MH/s with 0.05% hardware errors (+ or - 0.005%).
They are used and were run in an air filtered environment, in the summer they were unplugged when the chip temps went above 66 deg C, they were too loud and I like my neighbors.
$200 USD ea w/PSU plus shipping (from Canada) E-transfer or crypto (BTC, LTC, ETH)
Shipping in original packaging.
Forum escrow if required.
https://imgur.com/a/49Jh9NJIf I'm slow to respond it's because I'm only allowed 2 PM's per day, one hour apart.
Show Posts
. If your machine is just going to be an 8 card miner I can assure you (as I'm sure any experienced miner will verify) that a celeron with 4gb of ram doesn't even get half utilized while mining. The core usage sits around 30% and less than 2gb of ram gets used. In that case I can rebuild the 8 card miner I originally pulled the MSI Z170A Gaming M7 in my thread with a g3930, 4gb of ram (I can always put in 8gb if you'd prefer) and the m.2 -> pci-e adapter. Alternatively, I could sell you 8gb of DDR3 and an i3 (I don't remember which but I know I have an LGA 1150 i3 around here somewhere) leaving you to find an appropriate motherboard (I don't have any LGA 1150 mobos with 8 slots left). Let me know if any of this interests you.
