Show Posts
|
Pages: [1] 2 3 4 »
|
All my coin in 4 days mining is lost in suprnova, sucks
I hear you. My coins lost too although i'm pretty sure i stopped mining before they forked.
|
|
|
my coins from dedecated pool never got to my wallet
+1 , Lost 3k, Shitty network -.- Coins from suprnova and suchpool never arrived to my wallet either. Two and a half days of mining and nothing to show for it.
|
|
|
My wallet's synced but i never received the coins i withdrew from suprnova despite using the correct address and all. I also can't withdraw coins from suchpool.
|
|
|
what about the 280x hashrate? is 2.2 mhs fair?
![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FyyjLe0I.png&t=663&c=gucxPl5A8pmU_w) miner,kernel, any specs.. i'm guessing they are using 14.6 drivers which increases the hash rate of x11/x13/x15 etc. I couldn't get 14.6 to work as it kept crashing my comp, no matter what settings i put in the .bat. Probably because I have undervolted my cards. So, a work around was to stick with 14.4 drivers and then copy the opencl drivers from the 14.6 RC2 release into the sgminer folder. This increased my hash per card from 2.2 to 2.5 - nowhere near the 2.9 that Bojcha is getting but I would suspect that they have not undervolted. will tell you secret. i actually use 13.12 drivers and 14.6 rc2 installed on top of it. i generate bin with 14.6 and then roll back to 13.12. and all works much better. when i need 14.6 i just update driver from device manager. switching between drivers is less then 10 sec. I can confirm that. Using 13.12 drivers and Bojcha's conf gets me 2.7 MH/s @ 1050/1500.
|
|
|
Can anyone help me set up a .bat file for x15 mining? Whatever i 've tried so far doesn't seem to work and for the first time since i started mining i can't figure it out for the life of me.
|
|
|
hi all does any one has payout issue with monero.crypto-pool.fr ?, i've 45 XMR rewared according to the pool, but only 16 are on my wallet
scam ?
I don't know if it's a scam or not but it seems that at least some people ,myself included, have the same issue. The owner though blames the gui wallet instead of admitting something's wrong with his pool.
|
|
|
Edit. It started working afterall
|
|
|
Tried to sell and rebuy to profit on the scared dumpers but ended up losing a bit due to exchanges being laggy as hell and bugged out/not updating. Oh well, guess that's how it goes.
Edit: Every time I try to make a trade today it seems to be gone before my money gets there.
Same thing happened to me. Oh well.. All i can say is its your own fault for trying to dump.. Did you see me blaming anyone? Of course it was my fault.
|
|
|
Tried to sell and rebuy to profit on the scared dumpers but ended up losing a bit due to exchanges being laggy as hell and bugged out/not updating. Oh well, guess that's how it goes.
Edit: Every time I try to make a trade today it seems to be gone before my money gets there.
Same thing happened to me. Oh well..
|
|
|
Cryptoalts EU mining node is now open for testers.For those of you over in the EU, please do try it out and report your DOA % rates : http://www.cryptoalts.comAlso, if you want to try both nodes at the same time, I highly recommend you use different BC addresses. While your work is merged and accounted for, you'll only receive the report of the last node queried on your stats page. In the future I may change this to show all nodes, but for now I'm just looking for working expansion and the nice stuff later on. Sorry to the miners who got crap payouts today. I did a lot of updating this weekend and I noticed that the rollovers did work properly and reset the miner workers last payout, so anyone who jumped in today got crap payouts (my EU workers did, my USA worker that has been hashing for a while was fine). This was fixed. If this week goes well with the two nodes, Australia is next. ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) Node EU1 Test Hash rate 1.039982 MH/s Dead hash 0.011095 MH/s Dead rate 1.06 % Cudaminer has a reject rate of about 2-3% which is fine since 1 MH/s isn't optimal for p2p anyway. Edit: Rig is located in Germany. reporting about the cryptoalts eu1
Current Stats Current Value Node EU1 Test Hash rate 1.434290 MH/s Dead hash 0.058041 MH/s Dead rate 3.89 %
Very good stats so far! Others in the EU, be sure to try it out before BC Wednesday and set your multipool failovers appropriately! Node EU1 Hash rate 2.213666 MH/s Dead hash 0.053181 MH/s Dead rate 2.35 %
|
|
|
Hi all! Are these the cards that are sold in gpucoin store? Found a sweet local deal on them. If they're not, is it worth picking these for mining? What would be hashrates for them on known algos? thanks in advance. Brand Gigabyte Model Radeon R9 280X MPN GV-R928XOC-3GD I have 4xGigabyte GV-R928XOC-3GD-GA. I think it almost the same. Hashrate for some algo: Scrypt - ~710kH/s Scrypt-N - ~360kH/s x11 - ~2000kH/s Some settings - core - 1025MHz, memory - 1500Mhz, vddc - 1.075v Other algos i don't tested ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) I have the same card and I am getting 748 kh/s stable. Try zuikkis bin from here ( http://www.reddit.com/r/dogemining/comments/1uj4uk/optimized_scrypt_kernel_for_hd7970_r9_280x/ ).I barely reach 720 without it.. 1052mhz core, 1500mhz memory I get lower hashrate than you for scrypt-N though.. about 315kh/sThat's low for a 280X. I haven't used zuuikkis' bin but i'm getting 730KH/s on scrypt (1050/1500, powertune -20 and 1.137 on Trixx) and 360 on scrypt -N (1000/1500, powertune -20, 1.131V).
|
|
|
@minergr: try g 4 for groestl and u dont need high memory speed
groestl is not really optimized for GCN GPUs
Thanks for replying. I sort of have to set the memory clock that high because anything below 1150 and my monitor starts acting weird. Setting -g 4 actually gave me lower hashrates. I will probably try Skein too but it's been a long day and i'm too tired to fiddle with the settings any more.
|
|
|
Does anyone have optimal settings for 280X cards on Groestl? I'm getting 11.2 MH/s per card with
--lookup-gap 2 --thread-concurrency 8192 -g 1 -I 18 -w 256 --auto-fan --gpu-fan 30-75 --temp-cutoff 90 --temp-overheat 85 --temp-target 72 --gpu-memclock 1200 --gpu-engine 1100 --gpu-powertune -20
I tried with -I 20 but only gained 0.2 MH/s. All three cards are undervolted to 1.137 from Trixx.
|
|
|
Cheap coins on bittrex for anyone who wants to buy. Are people deliberately being stupid and sell so low or they just can't help it?
why you think it worth more? So your evaluation of the coin would be around 0.00044990 then or even lower?
|
|
|
Cheap coins on bittrex for anyone who wants to buy. Are people deliberately being stupid and sell so low or they just can't help it?
|
|
|
Here is an example of what I would like to see done with GPU Coin. This is also what i wish, and still hope GPUCoin team will create a business plan upload it, then update up on progress maybe twice a week. Anyways take a look at it. I put some time into it. It is not complete, and I didn't put any numbers for prices as I don't exactly know them. Also unsure how much money IPO raised for I put $60,000 but in general the number is meaningless since I put it mostly in percentage. I wish I could just post it but it's too big. Some grammar etc probably off, but i wasn't about to put too much extra time as I'm unsure if it will even get looked at much. https://drive.google.com/file/d/0B0sZwqua-x_sOEdycU5rN0xZWDA/edit?usp=sharingAnyways take it easy. I like what you 've done there. Probably James or someone from the team should take a look at it.
|
|
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs29.postimg.org%2Ff4jxujmbr%2Ffacepalm.png&t=663&c=OpfYHnSdfoGKsw) WHY ?! Don't try to find an answer. Since i got into crypto i've come to realize people are even more stupid than i thought. I really hope the downtrend goes on for a little while so that we get rid a large amount of the idiots that thought buying a few gpus would get them rich overnight. On a sidenote... Damn it i was at work and couldn't take advantage of the pump. I wanted to push it even highier, but some kind of idiot gave a sell order for 29 litoshi in cost of 128 LTC. That's a quite huge amount I couldn't buy. They just don't want to hit BTC market ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) if we hold it on 40 litoshi for 24 hours, MintPal will give us BTC pair. Pls someone push the coin higher, I just don't have enough money for it. I wonder if it was an actual order or someone who wanted the price to drop. Wish i could help with that but i'm up to my neck with expenses right now and i can't spare much.. It's like talking to a deaf person.. Same thing happened with PND. It could have easily stabilized over 10 satoshi but idiots starting dumping all their holdings at 7. Some people myself included didn't dump and we ended up making peanuts instead.
|
|
|
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fs29.postimg.org%2Ff4jxujmbr%2Ffacepalm.png&t=663&c=OpfYHnSdfoGKsw) WHY ?! Don't try to find an answer. Since i got into crypto i've come to realize people are even more stupid than i thought. I really hope the downtrend goes on for a little while so that we get rid a large amount of the idiots that thought buying a few gpus would get them rich overnight. On a sidenote... Damn it i was at work and couldn't take advantage of the pump.
|
|
|
@embicoin How come i can't find my address in there? Something wrong with the info i submitted?
|
|
|
|