I have an antiner u1 that has the red light and won't hash, it is recognized by pc nut not by bfg.
Any one experienced a similar situation?
P.S. it was hashing at 2.0 with more then enough cooling applied

Hey guy i got this working just fine with Antminers and k16;s was hoping some one could tell me if this is the correct way to over clock the k16.
bfgminer -S antminer:all --set-device antminer:clock=x0981 klondike-options":"355:60 -o stratum+tcp://mint.bitminter.com:3333 -u cronos_1 -p 1
Anyone??


Bueller Bueller Bueller?

16:41] KLN0:0 failed to update stats
 [2014-02-22 12:16:41] KLN0:0 went idle before work was sent

 

Is this normal? for the KLN?

I am running windows, not sure what batch file is or where its at. sorry.

like this? Sorry I'm not sure if i have a Batch file and if i do i don't know where it is.

{
"pools" : [
 {
  "url" : "stratum+tcp://mint.bitminter.com:3333",
  "user" : "cro",
  "pass" : "1",
  "pool-priority" : "2"
 }
],
"failover-only" : true,
"queue" : "3",
"log" : "1",
"scan-time" : "60",
"no-submit-stale" : true,
"set-device":["antminer:freq=0981"],
"klondike-options":"355:60",
pause
}

Hi guys, anyone know and where to add command to bfgminer so that when i quit i can read the stats before the window closes?
like in my .conf file.
Thank you


i think this is it ( Summary of runtime statistics:) when i hit Q i don't get to read it window scrolls by to quickly then closes.

which are the power bucks, I'm looking at troubleshoot.but can't seem to figure it out. got it. any idea where to get one of these? and installation guide?

Thank you adib

i will try this, but what is a power mos (mosfet) how can i test it and can it be replaced?
Thank you.

I tried "klondike-options":"355:60" 5.29 gh/s on one but the other is still at 2.5 gh/s. i have tried everything i can think of.

any one have luck runnig ant miners or klondike k16 with bit minter software?

i figured it out and chose to let them run at default, but one of them won't hash any ideas? it was working fine tried to flash it with picket but says i need firmware 1.28.0




So i got them running on bfgminer and was wondering what do i add to my conf folder in order to over clock the k16?


{
"pools" : [
 {
  "url" : "stratum+tcp://mint.bitminter.com:3333",
  "user" : "",
  "pass" : "",
  "pool-priority" : "2"
 }
],
"failover-only" : true,
"queue" : "3",
"log" : "1",
"scan-time" : "60",
"no-submit-stale" : true,
"set-device":["antminer:freq=0981"]
}

iirc? then can you point me in the right direction for using the picket 3 and possibly info on over clocking. I'm using bfgminer but have been reading that cgminer may be best.

Question i have searched the forum but cat seem to find an answer as to updating k16 firmware, would i need a PICkit3 or is there a usb boot loader? also i am a noob so don't let my knlowdge of info up top deceive ya.

Hi, using a mac and i hit m to add antminers but I'm not sure what the path is or how to fnd the path to my antminers.
here is the example i get,erupter:/dev/cu.SLAB_USBtoUART
thanks in advance.

Tank you, that post got the miners recognized and BFGMiner is up and running. now ill have to wait till a fix for high hw errors.
Thanks nate.

[2014-01-14 03:01:36] setrlimit: Changed soft fd limit from 256 to 1024 (FD_SETSIZE=1024; hard limit=unlimited)                   
 [2014-01-14 03:01:36] Started bfgminer 3.9.0                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:021:128: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:021:128: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:020:129: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:020:129: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:026:001: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:026:001: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 2 (iManufacturer) from usb:029:001: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:001: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:007: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:011: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:016: LIBUSB_ERROR_OTHER                   
 [2014-01-14 03:01:37] usb_devinfo_scan: Error getting USB string 1 (iProduct) from usb:029:018: LIBUSB_ERROR_OTHER                   

i installed them, they are visible in system report. mbp 10.9 is the machine I'm using.

thanks fixed the first issue still waiting on ant miners to be recognized. been running for 10 mins

i get the same message when i use, brew install bfgminer --HEAD. is there a way to uninstall and start the process all over?
  Thank you very much. i tried bfgminer -d? -S antminer:all but its not doing much.[2014-01-14 00:31:43] Started bfgminer 3.9.0
is all i get.