Latest posts of: Random-Reboot

So I have my 1060 3gb's running at +150 core and +50 memory. That was the only way I could make it stable. Also running them at 85w a card. Temps sitting at between 70 and 75 degrees c. Are these temps ok? Also are the watts ok? I have 2 cards per vga port on my 750w psu.

Kind regards
Steven

Edit fans are at 100%

What brand are those 1060's? Zotac mini crap? Seemed too hot to me considering that the fans are running at full power. I mean 75 degrees C are OK but not while having the fans at full speed. Your fans will probably die before your cards do.

Other than that, you are doing OK. You may try to run at %80 Power LvL also. Did you test at a lower lvl? Might help with the temperature too.

They are inno3d single fan. Was the first reasonable priced cards I saw since the drought. They all have Samsung memory though.
I had it running at 65w but increased to see if I would get better hashrate. I will try 80w and see how that goes.

I use the Curve function in the Core Clock in Afterburner menu. The voltage is fixed at 800mV, the frequency of three video cards is from 1645 to 1759 MHz (matched to stability after stress tests). Single-fan MSI GTX1060 Aero 3Gb, temperatures up to 61 degrees in a closed case CM Haf X. Hashrate approximately 5 MH / s per card, z-enemy 1.08. Screenshot of AfterBurner in the attachment. I apologize for my English.