 Show Posts
|
|
Pages: [1]
|
|
Same here:
randomx: Couldn't allocate RandomX cache using large pages
cat /proc/meminfo | grep -i huge
AnonHugePages: 5361664 kB
ShmemHugePages: 0 kB
FileHugePages: 0 kB
HugePages_Total: 5
HugePages_Free: 3
HugePages_Rsvd: 3
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 7766016 kB
|
|
|
|
I have been using TRM for over 6 months with very happy results on my Ethereum mining farm. The most recent release has been causing random GPU mining crashes on rigs that have been stable for months. The problem with the crashes is 0.7.17 frequently hangs and just sits there not mining until the user issues a system restart. I have had 10-20 rigs not mining for hours due to this. I recently went back to 0.7.15 and all the issues went away. I have been running a farm for about four years now and know when there is an issue with mining software versus GPU crashes due to OC, riser, voltage issues, etc... Here is SMOS log of one of the many crashes after 0.7.17 upgrade on all my machines. [2020-11-10 04:36:13] Pool us2.ethermine.org received new job. (job_id: 0x238cea67918072b4b145002a593cb77015079123ffb74ce84a47d8ff1f78aafc)
[2020-11-10 04:36:14] Watchdog triggering miner shutdown after restart script execution.
[2020-11-10 04:36:14] Shutting down...
[2020-11-10 04:36:14] Watchdog thread exiting.
[2020-11-10 04:36:14] GPU10 thread exiting.
[2020-11-10 04:36:14] GPU 9 thread exiting.
[2020-11-10 04:36:14] GPU12 thread exiting.
[2020-11-10 04:36:14] GPU 2 thread exiting.
[2020-11-10 04:36:14] GPU 1 thread exiting.
[2020-11-10 04:36:14] GPU11 thread exiting.
[2020-11-10 04:36:14] GPU 3 thread exiting.
[2020-11-10 04:36:14] GPU 6 thread exiting.
[2020-11-10 04:36:14] GPU 7 thread exiting.
[2020-11-10 04:36:14] GPU 0 thread exiting.
[2020-11-10 04:36:14] GPU 8 thread exiting.
[2020-11-10 04:36:14] GPU 5 thread exiting.
[2020-11-10 04:36:24] GPU 4 thread 0 shutdown timed out.
[2020-11-10 04:36:24] Successful clean shutdown.
Miner ended or crashed. Restarting miner in 30 seconds... Same here. 1-2 times per day. 2 rigs. Appears only at latest version |
|
|
|
|
Hi there!
Noticed that block revenue increased by 2-3 times since for last several hours(ETH). Now it's 4-6 ETH per block.
Could anybody explain why?
Thanks!
|
|
|
|
|
Hi Doc!
Thank you for great miner.
But I have a problem with the last
Periodically, one of my rig gets stuck with (all red messages)
[2019-06-01 09:42:14] json_receive[74]: {"id":6219,"jsonrpc":"2.0","error":{"code":-1,"message":"Invalid job id"}}
[2019-06-01 09:42:14] miner_result: GPU5[BUS:26] result rejected for job[161] [invalid job id]
[2019-06-01 09:42:37] json_send[237]: {"id":6220,"jsonrpc": "2.0","method":"submit","params":{"id":"4553b35d-3168-4ae2-a1cc-72082ba2f832","job_id":"XlqBxuAKQJGiynQXXaJybrzA+SoT","nonce":"1c001857","result":"ad5af10ea1afa641bc7539381073cc59e96e9c7143081da29e2b9b70fc2f0000"}}
And its the only way to restart/reboot.
My config is:
{
"cryptonight_type" : "normalv4",
"intensity" : 0,
"tweak_profile" : 10,
"min_rig_speed" : 12000,
"min_rig_speed_duration" : 50,
"reboot_script_gpu_watchdog" : "reboot-windows.bat",
"reboot_script_min_rig_speed" : "reboot-windows.bat",
"double_threads" : true
}
But in a case when it come - no settings (min_rig_speed) not working
Please, help
|
|
|
|
|
Hi Doktor!
Noriced when using gpureorder hashrate table and found share list are not equal.
Hashrate table is correct.
2019-05-02 13:33:42] GPU1[BUS:18] result 0x2AC35BCD accepted for job[7] [195ms]
[2019-05-02 13:33:42] GPU0 : 56304 H/s [T: 64c, RPM: 3302, CC: 1408 MHz, MC: 970 MHz][BUS:3]
[2019-05-02 13:33:42] GPU1 : 61957 H/s [T: 65c, RPM: 3499, CC: 1408 MHz, MC: 1100 MHz][BUS:8]
[2019-05-02 13:33:42] GPU2 : 61483 H/s [T: 63c, RPM: 3313, CC: 1408 MHz, MC: 1095 MHz][BUS:11]
[2019-05-02 13:33:42] GPU3 : 56613 H/s [T: 57c, RPM: 3635, CC: 1408 MHz, MC: 990 MHz][BUS:18]
[2019-05-02 13:33:42] GPU4 : 59985 H/s [T: 64c, RPM: 3724, CC: 1408 MHz, MC: 1075 MHz][BUS:22]
[2019-05-02 13:33:42] GPU5 : 67075 H/s [T: 60c, RPM: 3295, CC: 1408 MHz, MC: 1075 MHz][BUS:25]
[2019-05-02 13:33:42] Total: 363417 H/s
[2019-05-02 13:33:46] GPU0[BUS:3] result 0x156FBE0E accepted for job[7] [201ms]
[2019-05-02 13:33:47] GPU5[BUS:11] result 0xD5726E9D accepted for job[7] [195ms]
[2019-05-02 13:33:47] GPU3[BUS:8] result 0x801D62F8 accepted for job[7] [194ms]
[2019-05-02 13:33:54] GPU3[BUS:8] result 0x9575D679 accepted for job[7] [200ms]
[2019-05-02 13:33:56] GPU4[BUS:25] result 0xAACF5A44 accepted for job[7] [201ms]
[2019-05-02 13:33:58] GPU1[BUS:18] result 0x401FDA9E accepted for job[7] [201ms]
[2019-05-02 13:34:08] GPU3[BUS:8] result 0x80274AAD accepted for job[7] [195ms]
[2019-05-02 13:34:10] GPU2[BUS:22] result 0x557C5F8A accepted for job[7] [194ms]
[2019-05-02 13:34:12] GPU2[BUS:22] result 0x6AD29592 accepted for job[7] [195ms]
[2019-05-02 13:34:15] GPU2[BUS:22] result 0x557EBD5A accepted for job[7] [195ms]
[2019-05-02 13:34:17] GPU5[BUS:11] result 0xD5802A03 accepted for job[7] [194ms]
[2019-05-02 13:34:17] GPU3[BUS:8] result 0x95807C9D accepted for job[7] [201ms]
[2019-05-02 13:34:34] GPU2[BUS:22] result 0x6ADC6630 accepted for job[7] [194ms]
[2019-05-02 13:34:35] GPU1[BUS:18] result 0x2AD9FDCB accepted for job[7] [194ms]
Also, parameters configured in gpu config applies to unexpected GPUs.
ver. 1.8.7
|
|
|
|
Hi Dok and mates!
Cant make tweaking work:(
I get error in log:
Tweaking disabled - WinIO could not be loaded
I suspect the porblem that I dont have no WinIO64.sys nor WinIO64.dll.
If it is the problem - how I can instal them?
Tried different drivers till latest, the same error.
Please, help!
I don't know where you downloaded SRB from but download from https://www.srbminer.com/download.htmlWinIO64.sys is bundled with the miner. After that you need to give miner administrator privileges, without that you can't use tweaking profiles. Here's a how-to video : https://www.youtube.com/watch?v=QyJzAhdDnPg&feature=youtu.beGot it!!! Thank you very much!!!!! |
|
|
|
Hi All!
Trying to start WinGUI version, but get:
Driver Version 18.10.21.01-180607a-329759E-RadeonSoftwareAdrenalin
ADL version 7.18.10.1327 build 11021
ADL dll path C:\WINDOWS\SYSTEM32\atiadlxx.dll
ADL2_OverdriveN_SettingsExt_Get not found
ADL2_OverdriveN_SettingsExt_Set not found
ADL2_OverdriveN_MemoryTimingLevel_Get not found
ADL2_OverdriveN_MemoryTimingLevel_Set not found
in logs and message "Start service failed..."
.Net FW 35 is on, drivers 18.6.1
Please, help!
Hey, Yeah, you're using an older driver that doesn't support the ADL functions being used in the GUI tool. I suggest to either upgrade your drive or use the CLI version which will work perfectly fine. That said. Thank for suggesion, but I tried drivers till the latest 19 Situation the same. I suspect the porblem that I dont have no WinIO64.sys nor WinIO64.dll. If it is the problem - how I can instal them? |
|
|
|
|
Hi Dok and mates!
Cant make tweaking work:(
I get error in log:
Tweaking disabled - WinIO could not be loaded
I suspect the porblem that I dont have no WinIO64.sys nor WinIO64.dll.
If it is the problem - how I can instal them?
Tried different drivers till latest, the same error.
Please, help!
|
|
|
|
|
Hi All!
Trying to start WinGUI version, but get:
Driver Version 18.10.21.01-180607a-329759E-RadeonSoftwareAdrenalin
ADL version 7.18.10.1327 build 11021
ADL dll path C:\WINDOWS\SYSTEM32\atiadlxx.dll
ADL2_OverdriveN_SettingsExt_Get not found
ADL2_OverdriveN_SettingsExt_Set not found
ADL2_OverdriveN_MemoryTimingLevel_Get not found
ADL2_OverdriveN_MemoryTimingLevel_Set not found
in logs and message "Start service failed..."
.Net FW 35 is on, drivers 18.6.1
Please, help!
|
|
|
|
|
Hi Doktor,
Accoding to you recomendation I changed drivers to Adr.18.6.1(prev. was blockchain)
and faced with hash rate double decreased.
Iw was ~1900h/s on old drivers, but now it ~830h/s for rx570-4 on CN fast.
Compute mode enabled(SRBMiner-CN.exe --setcomputemode).
Please, help. Ireaaly dont want to return to blockchain drv.
|
|
|
|
|
Hello Doc!
Next week XTL(stellite coin) be forked to new algo CryptoNight variant xtl.
Do you plan to add this algo to SRB miner?
It'll be very useful feature.
P.S. xmrig have it already
WBR
|
|
|
|
|
